Used Tape Machine for sale (65,124)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Nsdpfx Adeh Ek H Se Iswk Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Technical details: grinding length: 600 mm centre height: 180 mm swing dia.: 360 mm Nwsdpfx Asrkr U Esd Iek workpiece weight: 80 kg max. dia. of grinding wheel: 500 mm grinding wheel width: 80 mm grinding wheel hole diameter: 203,2 mm peripheral speed: 45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system. *

Condition: good (used), Year of construction: 1998, Deckel Maho DMU 103V Year of manufacture: 1998 Control system: - Siemens 810D (Shopmill) Nwsdpfx Ajzwg E Esd Isk Main spindle: - max. 8000 rpm Travel ranges: - X-1000, Y-600, Z-600 mm Work table: - Clamping area 1200 x 600 - max. table load 800 kg Tool changer: - 24 magazine positions Availability: - Immediate

Condition: excellent (used), Horizontal Cutter Hobart Nwedpozwm N Rsfx Ad Ijk High-quality, powerful machine for processing meat and vegetables. The machine is fully functional after a complete overhaul. Included with the machine: 2 bowls, 2 knives. Capacity: 11 liters. Voltage: 380V.

Condition: good (used), Year of construction: 1987, Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: 2555 kg Nsdpfxszwpm Sj Ad Ijwk

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Material testing machine Testing force in tension/compression: 500 N Overall height, without head crossbeam: 789 mm Overall width: 411 mm Nedpfx Adoziixls Iewk Overall depth: 622 mm Installation area: net footprint: 0.008 m² load frame base area: 0.196 m² specific floor load: based on typical installations: 0.85 kg/cm² with 50% safety margin: 1.28 kg/cm² Ceiling load: based on typical installations: 97 kN/cm² with 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with extension arm installed pointing upwards: minimum height: 235 mm maximum height: 565 mm Working space height with extension arm installed pointing downwards: minimum height: 90 mm maximum height: 420 mm Software: testXpert III Version 1.9 Weight: approx. 78 kg with accessories Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. Nwodpfx Adszwfule Isk The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness Nsdozwlnrspfx Ad Iswk SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° Nedpfx Aozwm Akod Ijwk External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: Nedeqmm D Sepfx Ad Ijwk You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! Nedpfx Adjy Dfcle Ijwk A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 2017, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 2500 mm Y-AXIS TRAVEL: 1800 mm Z-AXIS TRAVEL: 800 mm DISTANCE SPINDLE NOSE-TABLE: 250 - 1050 mm RAPID FEEDS X-Y-Z: 20 m/min SPINDLE: 10000 rpm; 24,5 - 63 kW; 117-300 Nm; ISO 50 - BT TABLE SIZE: 2800 x 1700 mm MAX ADMITTED LOAD: 8000 Kg HIGH PRESSURE COOLANT: INCLUDED TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 130 mm MAX TOOL LENGHT: 350 mm MAX TOOL WEIGHT: 15 Kg CONTROL UNIT: HEIDENHAIN WEIGHT: 29500 Kg OVERALL DIMENSIONS: 4200 x 7100 x 4500 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER ; LINEAR SCALES ; PORTABLE HANDWHEEL ; EXHAUST SYSTEM Nwjdpfx Aozlu S Ajd Iek

Condition: good (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC 50/60Hz, max 58A Dimensions: 200x260x250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis: 560 mm Y-axis: 410 mm Z-axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: free choice of station number; automatic bi-directional search Tool holder: MAS BT-40 Max. tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Nodpjw T Tp Refx Ad Iswk Tool change time: 2.9 s (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min Subject to errors or omissions, all technical specifications are provided without guarantee.

Condition: used, Year of construction: 2008, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC Nedeyh Hwuopfx Ad Ijwk - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 111, Ceetec IP250 industrial painting machine for painting, varnishing, oiling or lacquering of mouldings, claddings, deckings etc. Industry model, robust heavy duty machine for daily production. Maximum work piece cross section 100x250mm. Production speed up to 150 m/min. Nwedpfx Adewa D N Ne Iek Including infeed and outfeed roller conveyors (manual). Very good condition. New price ca 30 000€

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Njdpfxexyfmgo Ad Iswk Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine Nwjdpfxjy Ulzie Ad Isk -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: used, Year of construction: 1984, x-travel 1000 mm y-travel 508 mm z-travel 460 mm size of pallet 1240 x 550 mm numbers of pallets 2 workpiece weight 800 kg spindle taper ISO 40 spindle motor 5,5 kW turning speed range 28 - 4000 U/min no. of tools in magazin 30 Nwedpjtqqk Iefx Ad Iek control MAZATROL M 1 weight of the machine ca. 5,6 t dimensions of the machine ca. 4,50 x 3,00 x 2,65 m acc.: chip conveyor

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Nedjyi A Tdepfx Ad Ijwk

Condition: used, Year of construction: 2002, For sale: Junget / Biesse Rover 24 L CNC milling machine / machining center. The machine is designed for professional processing of furniture panels, wooden components, plastics, and production components. It is suitable for carpentry workshops, companies producing furniture, kitchen elements, fronts, structural panels, PEHD components, and other parts requiring precise milling and drilling. The Biesse Rover 24 L is a robust CNC machining center equipped with a vacuum table, automatic tool changer, and a set of drilling spindles. The machine enables quick and repeatable performance of milling, vertical and horizontal drilling, and grooving operations. Technical specifications: Model: Junget / Biesse Rover 24 L Type: CNC milling machine / CNC machining center Machine dimensions: approx. 5.8 × 2.45 × 2.5 m Work table: vacuum X-axis travel: 4500 mm Y-axis travel: 1300 mm Z-axis travel: 180 mm Vacuum pump: 120 m³/h Control system: NC1000 Operating system: Windows XP Automatic tool changer: yes Vertical drilling spindles: 7 pcs Horizontal drilling spindles: 8 pcs Circular saw: for making grooves / slots, e.g., in fronts or furniture components Safety features: safety grid / safety mat Tools installed in the machine: included Applications: The machine is particularly well-suited for the production of furniture, kitchen cabinets, fronts, carcasses, base panels, and components requiring serial drilling and milling. The drill array allows for the simultaneous execution of several holes, which speeds up production and ensures dimensional repeatability. The machine was mainly used for processing PEHD1000 plastic, which confirms its versatility and the ability to work not only with wood-based materials but also with engineering plastics. Technical condition: The machine has been used. According to information from the previous owner, the device is functional, starts up, and has no known defects or reservations. The equipment is sold as used and is subject to verification by the buyer upon collection. Key advantages: * robust industrial construction, * large working area, * vacuum table, * automatic tool changer, * vertical and horizontal drilling spindles, * circular saw for grooves and slots, * ability to process panels, wood, and plastics, * good machine for the production of furniture and serial components. The machine is suitable for continued operation in a production plant, carpentry workshop, or company engaged in CNC machining. Nwsdpfjzf E E Hjx Ad Ijk

Condition: used, Year of construction: 2000, Overview  The swing top closing machine was built in 2000 by the German manufacturer Kleindienst. The machine was continuously maintained and is already dismantled and stored. Technical data  - Capacity: 18,000 bottles/h  Njdjwkq Iaspfx Ad Iswk - Number of closing heads: 24 - Formats: - 0,5 l Bügel Lochmund - 0,33 l Bügel Kropfhals  - Working direction: clockwise

Year of construction: 1997, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 15 m/min Njdpfsh Stzkox Ad Iswk TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar Nwodpfoq Nqkxex Ad Isk TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Nwedpfxohv U U De Ad Iek Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Nwsdpfoikivmsx Ad Ijk Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING