Used Telco Photocell Amplifier for sale (543)

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nodpfx Amsykqxdj Uswk Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Nwedpfxexranpj Am Uok Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Nodpfx Ajfz Dt Nsm Uewk Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Njdpfjfz I D Djx Am Ujwk The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Nwjdpfx Asfz I Edsm Usk Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: as good as new (ex-display), Kistler 2151B30154002 Electromechanical NC joining module List price 19.000 € net The NC joining modules NCFH Type 2151B... consist of a robust housing in which a displacement sensor as an absolute encoder and a piezoelectric push-pull force sensor are integrated. The compressive or tensile forces acting on the sensor generate a proportional electrical charge in the piezoelectric measuring element, which is converted into an analog voltage signal by the integrated charge amplifier. The drive motor is an electronically commutated AC hollow shaft servo motor controlled by a servo amplifier. Constant speed, i.e. constant traverse speed, is ensured. Standard functions such as joining on block, position and force-controlled joining as well as traversing on intermediate positions are supported. Technical data: With hollow shaft motor and compact design Nwedpfxoiuxtio Am Usk Integrated piezoelectric force sensor including charge amplifier and Displacement absolute encoder Measuring direction pressure / tension Measuring range 1: 30 kN Measuring range 2: 15 kN stroke: 400 mm Displacement repeatability: 0.01 mm Max. Travel speed: 300 mm/s With holding brake Item condition: new, with traces of storage Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2019, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 3820 345-19, total height: 2,020 mm, total width: 855 mm, total length: 2,580 mm, type of input current: three-phase, overall weight: 270 kg, film width: 280 mm, compressed air connection: 6 bar, number of blades: 1, input voltage: 380 V, product height (min.): 60 mm, product height (max.): 200 mm, product width (max.): 70 mm, product width (min.): 70 mm, path measurement accuracy: 1 mm, nominal power: 3 kW (4.08 HP), air demand: 3.6 m³/h, height adjustment type: electric, conveyor belt length: 1,000 mm, conveyor belt width: 300 mm, roll diameter: 300 mm, roll width: 280 mm, Equipment: documentation/manual, 4 seals (sachet) packaging machine, 2 lane, for liquid and semi-viscous products. Including: dosing unit and outlet conveyor dry contact (5A max) for external transfer pump to feed the 30 lt hopper 2 printers Markem 8018 (one per lane) photocell for printed film easy open tear notch Nedsyt Iw Aopfx Am Ujwk

Condition: new, Beckhoff AX5203 servo amplifier SN: 000523830, unused in sealed original packaging, 100% fully functional, delivery as per photos Nodpox Ht Diefx Am Uswk

Condition: like new (used), working width: 1100 mm unit with steel roller 2nd unit rubber with pad Njdpfx Amox H Rq Hj Uswk motor power: 11 kW oscillation via photocells 2 conveyor feed speeds pad automatically triggered with adjustment units switched on from the control panel material thickness sensor year of manufacture: 2002

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Nwodpfxjyaimlo Am Ujk Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: ready for operation (used), Fanuc A06B-6127-H209 amplifier SV 80/80HV SN V11119827, used, minor signs of wear, 100% fully functional, scope of delivery as shown in the photos. Nwjdsx Erd Sopfx Am Uek

Condition: new, HBM AE501 measuring amplifier Rev. No. 1.02, unused, 100% functional, scope of delivery as per photos. Nwodpfjx Errcjx Am Uok

Condition: ready for operation (used), Seidel 65WKS-CE310/26-P0 servo amplifier SN:650230306, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Nwedpjx Euflofx Am Uok

Condition: ready for operation (used), Seidel 65WKS-CE310/26-P0 servo amplifier SN:650232388, used, normal signs of use, 100% functional, scope of delivery as per photos Nwsdpfjx Eufrex Am Ujk

Condition: ready for operation (used), Seidel 65WKS-CE310/6PB servo amplifier SN, used, normal signs of wear, 100% functional, scope of delivery as per photos. Nodpfxox Euf Ss Am Uewk

Condition: ready for operation (used), Fanuc A06B-6096-H103 Servo Amplifier Module, Version: D, SN: EA910920, professionally fully refurbished and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Nwodpex Dwnkjfx Am Uek

Condition: good (used), Year of construction: 2002, - Equipped with a labeling station for applying self-adhesive labels. - Year of manufacture: 2002 - Last service: June 2023 - Capacity: 1700 bph - Formats: Ø 60/110 mm - Working direction: left to right - With variable speed - With photocell at the machine's output Nwsdpfxjwff Ahj Am Uok - With motorized conveyor belt - Without the rotary infeed table - With the small rectangular outfeed table - With SOJET inkjet printer for batch numbers, etc. – year 2022 - In good condition

Condition: like new (used), Motor power 5.5 kW Nwodpoxnzuvsfx Am Uok Cutting length 3000 mm Maximum height 60 mm Hydraulic knife movement Hydraulic clamping Photocell protection

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, overall weight: 6 kg, power: 4.5 kW (6.12 HP), Equipment: safety light barrier, A06B-6117-H104 – Fanuc Servo Amplifier For sale: Fanuc Servo Amplifier A06B-6117-H104. * Overhauled and fully tested. * Limited stock available. * Suitable for various Fanuc CNC machines and servo systems. * Please contact us for availability and pricing. Also, check out our other listings for more Fanuc parts, servo amplifiers, motors, drives, and industrial electronics. Nwodpfezi T N Isx Am Uek Do you have any questions about this product or are you looking for repair services for a Fanuc Servo Amplifier or other CNC electronics? Please do not hesitate to contact us. We will be happy to assist you.

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages Nedpfx Ajy Ra Ddom Ujwk - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1973, total width: 1,950 mm, total length: 5,650 mm, total height: 1,920 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 7 bar, overall weight: 2,300 kg, type of input current: three-phase, CAPACITY 250 pcs/min CAPACITY (REINFORCED BAG) 100 pcs/min BAG WIDTH 830 mm BAG LENGTH 70-1000 mm BAG THICKNESS 0,020-0,100 mm QTY OF SERVO MOTORS 4 pcs TOTAL POWER 11 kw MACHINE WIDTH 1760 mm MACHINE LENGTH 5650 mm MACHINE HEIGHT 1920 mm MACHINE WEIGHT 2300 kg STANDARD FEATURES - Thanks to the touch operator panel, the bag size, the number of bags, the production speed, the number of bags in the package can be seen, the number of stops in the total count. - There is 1 photocell for cutting printed and unprinted bags - Servo motor controlled pulling rollers help cutting at high speed and with the desired measurement precision. - Thanks to the servo motor controlled welding jaw, strong and quality welding is ensured. - Thanks to the servo motor controlled belt system, the belts work synchronously to the stacking system. - Stoper roller system with servo motor controlled for better stacking - Warp rolls inverter tension control systems Nsdpfx Amszga T Io Ujwk - With pneumatic ballerina system - Automatic edge control systems - Automatically stops when the roll is finished - Photocell stops automatically when printing place is not correct - Ability to work in PP, OPP, CPP, High Density Polyethylene ( HDPE ), Low Density Polyethylene ( LDPE ), bags STANDARD EQUIPMENT - Patch handle unit - Handle hole punch - Bottom support welding apparatus - Bottom gusset apparatus - PE side welding (digging) jaw - PE double weld (t-shirt) jaw

Condition: good (used), Code: 0377 Brand: COLOMBO R Model: PCA.S Nodpfjy I Sncex Am Ujwk Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation

Condition: new, mileage: 300 km, power: 125.03 kW (169.99 HP), first registration: 01/2026, fuel type: diesel, overall weight: 5,300 kg, tire size: 205/75r16c, axle configuration: 4x2, wheelbase: 4,325 mm, fuel tank capacity: 71 l, color: black, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 21, Year of construction: 2025, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, parking heater, power assisted steering, soot filter, summer tires, traction control, Minibus Mercedes Benz Sprinter 517 CDI Tourism - Euro 6 - 19+1+1 VIP Seats Sprinter 517 CDI Interior panelling plus thermal and acoustic insulation in the passenger compartment Digital EU tachograph with RPM and supplementary recorder Third brake light Nsdsy Eqrlspfx Am Uowk 9G-TRONIC automatic transmission Metallic paint MB 9197 Obsidian Black Painted side panels – plastic parts Cruise control Raised podiums under the seats and last seat row Doors and glazing: Electric glass door with recessed entry Large panoramic windscreen with electric sunblind Double-glazed, high panorama, tinted windows Windows in rear doors Electric windows Electrically adjustable and heated exterior mirrors Luggage compartment and extensions: Recessed luggage compartment Seats and interior fittings: 19 adjustable seats (backrest + width) with Top Flair seat and backrest upholstery, and comfort headrests All seats upholstered in synthetic leather Vertical grab handles on both sides 2- and 3-point safety belts 5 double seats on the left side 5 single seats on the right side 4 seats in the last row Original MB driver's seat Armrest for driver's seat Guide's seat Air conditioning, heating and lighting: Dehumidification and defrost function Original MB auxiliary heater 5 kW 2 convectors with booster pump & fans Original MB driver's air conditioning 7 kW VIP service sets with reading lamp and air vents Overhead luggage racks with climate ducts and lighting (2 colours) WEBASTO DIAVIA 15 kW passenger compartment air conditioning LED ceiling lighting LED at entrance steps LED at podiums LED lighting between the windows LED lighting under the windows Interior features: Interior panelling and thermal/acoustic insulation in passenger compartment Window surrounds upholstered in synthetic leather Thermal and acoustic insulation Sidewall panelling in matching fabric to the seats Ceiling covered in Alcantara Anti-slip PVC flooring in wood or marble look Grab rail with partition behind the driver Curtains Dashboard with graphics Equipment and interior accessories: Radio CD, MP3, DVD player with microphone and amplifier 19'' LCD monitor Reversing camera 12 USB double sockets USB double socket for driver Refrigerator under dashboard Digital clock and thermometer Main switch for additional installations Equipment and exterior accessories: Reversing warning device Side skirts Chrome wheel covers Chrome exterior mirrors Front mud flaps, original MB Rear mud flaps, original MB Miscellaneous: COC document Fire extinguisher Inscriptions, decals and lettering MB service booklet Emergency exits / roof hatch as emergency exit Emergency hammers Immediately available

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Nwjdpfjzaq Anex Am Ujk Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick

Condition: ready for operation (used), Year of construction: 2013, WP Haton Crustica mediterranean production line for artisan type of bakeries Nwedpfsu Upkdex Am Ujk Huge number of products can be made mediterranean or classic The line can be used for baguettes with premoulder or rounder for regular products By pass for intermediate proofer Sheeting of moulding possibility Different forming stations and decorating possibilities Products: Baguettes Whole meal Ciabatta Artisan breads Batone Brioche year of build 2013 max capacity 1500 pcs/h consisting of: WP V300 dough divider 1 pocket type 1000 year of build 2013 weight range 100 - 1200 grams Voluminator WP CR59 AT conical rounder year of build 2013 hot air, heating oil on cone weight range 90-1600 gr. WP AF 2002 intermediate proofer year of build 2013 long nets retraction belt Photocell controlled infeed conveyor UV lamps PLC with touch panel WP Combi U-L year of build 2013 stainless steel curling net standard version extended for pointed ends with driven top moulding belt and pressure board weight range 200 - 2000 grams WP make-up table