Used Telco Photocell Amplifier for sale (538)

Condition: like new (used), Like-new batch of components from TELCO Sensors for Sitron. Consisting of the following types: Gjdpfx Apjzzpn Re Djkc Telco PA 11 A 300T light barrier amplifier Telco PA 11 A 300T light barrier amplifier Telco LR 100L TS38 15 light receiver Telco LR 100L TS38 15 light receiver Telco LT-100 HL-TS 38-15 light transmitter

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Gkodpfxjz R Sxdj Ap Djc Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: used, RMS Power amplifier / field unit / vibration testing system RMS TGE 10-5/12 + RMS FE3 System package offered exclusively as a source of spare parts / component supply For sale is a used RMS system package for vibration testing systems, consisting of a power amplifier, cooling unit and field unit. The components are sold exclusively as a set. Functionality has not been tested. Technical data, power amplifier: Manufacturer: RMS Regelungs- und Messtechnik Type: TGE 10-5/12 Serial No.: 16606 Year of manufacture: 2014 Input: 3 × 400 V / 50 Hz Power: 45 kVA Cooling unit: Type: SWG 761/9 Serial No.: 16608 Year of manufacture: 2014 Weight: approx. 250 kg Power stages: RMS power module TGE 10-400 Several power modules available in the amplifier cabinet Field unit: Manufacturer: RMS Regelungs- und Messtechnik Type: FE3 Serial No.: 10712 Year of manufacture: 1995 Current display: 0 – 300 A Weight: approx. 600 kg Dimensions and weight: Dimensions amplifier / cooling unit (W × D × H): approx. 1,800 × 800 × 2,000 mm Weight power amplifier: approx. 800 kg Weight cooling unit: approx. 250 kg Weight field unit FE3: approx. 600 kg Total weight: approx. 1,650 kg Equipment: RMS power amplifier TGE 10-5/12 RMS cooling unit SWG 761/9 RMS field unit FE3 RMS power module TGE 10-400 System control panel with touch display Power transformers / chokes Power, control and protection components Cooling system / cooling fan Analog ammeter 0 – 300 A Emergency stop, start button and main switch Connection and supply components as shown in the pictures Application areas: Spare parts sourcing Repair of existing RMS vibration testing systems Supply of spare parts and assemblies Gkjdpfx Ajz Ixu Dop Dec Conversion and repair projects Scope of delivery: 1 × RMS TGE 10-5/12 power amplifier 1 × RMS cooling unit SWG 761/9 1 × RMS FE3 field unit Available TGE 10-400 power modules System control panel Connection and supply components as shown in the pictures Condition: Used Optical condition as shown in the pictures Functionality not tested Sold exclusively as a source of spare parts / component supply. Not offered as a functional machine. No warranty for functionality, operational readiness or completeness. Shipping or freight transport possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Light barrier, safety light curtain , Reflective light barrier, light barrier, safety light curtain, reflective light barrier, photoelectric sensor, light sensor, light grid -Manufacturer: Telco, light grid Sitrans Alpha receiver bar R8-K32-46-A45-G71-S1-R 2 pieces Ovp .: 0479412290 Stadler ID 6130729 Geder Htnnspfx Ap Dskc -Quantity: 79 boxes available -Price: per box -Box dimensions: Ø 67 x 1755 mm -Weight: 3.1 kg/carton

Condition: new, Promess servo press KA-EMF80 80 kN, new, with DMS amplifier Manufacturer: Promess Type: KA-EMF80 Type: Servo press Gedpfx Aorgn Nnsp Dskc kN: 80 Condition: New Calibrated: Yes DMS amplifier: BA 624.u2 More servo presses, new and used, can be found in our shop! International shipping costs available upon request!

Condition: new, Promess KA-EMF20/150 servo press, 20 kN Manufacturer: Promess Type: KA-EMF20/150 Gkodpfx Apsrgn N Sj Dec Type: Servo press kN: 20 Item condition: New Calibrated: Yes DMS amplifier: BA 62601 More new and used servo presses can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Bosch DM 4K 7101-D, servo module Amplifier module 1070079646-208 Item condition: Used, in perfect condition R(2)B-7_EK(BOR) You can find more modules – new and used – in our shop! Gjdpjk Szy Uofx Ap Djkc International shipping costs available upon request!

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition Gksdpfx Apsz Ibduj Doc (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan. Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 Gksdpszdry Usfx Ap Dsc Input: 3x400V-50Hz, 14.5 kVA Cooling fan SWG 108 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Gjdpfx Ajz Dxkdjp Dokc Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Condition: good (used), Horizon VAC-600Ha + VAC-600Hc + SPF-200a + FC-200a Booklet Making Line The machine is fully operational and ready for production. Very low mileage, with only 1.3 million bindings. This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: Max size: 350x610mm (with shelf extension) Min size: 120x148mm Max speed: 9500 sets/h Vacuum-air feeding 6 shelves x 2 towers. Stack height: 130mm Weight: 40-350g Power supply: 230V Weight: 325kg/piece The towers are of the latest generation with new compressors (large box), a new type of photocell, and a new wireless remote control. Controlled via a color touchscreen display and a wireless remote control. Jam, double-feed, and misfeed sensors Horizon SPF-200A 10.4″ color touchscreen display Non-stop operation thanks to the mis-collection ejection function Gedpfx Apez R Irfe Djkc Max size: 508x356mm; Min size: 180x120mm Max speed: 4500 booklets/h Weight: 500kg Wire stitching Folding Two Hohner 43/6 s heads (max. 4) Storage capacity: up to 200 jobs in the machine’s memory. Horizon FC-200A Cutting thickness: 4-5mm 230V power supply Weight: 244kg New trimmer design, stable operation with servo motors, and additional booklet guide. The machine includes: LC-200 delivery, PK-20 bundling device, and a jogging table. PJ-77R service tools, spare parts, documentation.

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm Godpfxjz E S Ile Ap Djkc • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Godez I Inajpfx Ap Dskc Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511

Condition: excellent (used), LDS Type: V895-440 HBT900C with SPA50K amplifier Gksdezg Tybopfx Ap Djc Technical data: Actuator dimensions: 440 mm Sine force vector: 55.6 kN (peak) Random force vector: 55.6 kN (RMS) Half-sine force vector: 166.8 kN (peak) Frequency range: 0 to 2100 Hz Sine acceleration max.: 981 m/s² Random acceleration max.: 490 m/s² Velocity max.: 1.6 m/s Displacement: ± 63.5 mm Vibration exciter mass: 55 kg Max. load: 700 kg Amplifier dimensions: W x H x D mm: 537 mm x 1905 mm x 895 mm Weight: 622 kg Slip table: Working surface: 900 mm x 900 mm Plate thickness: 50 mm Plate weight: 80.4 kg Max. load: 7250 kg Usable frequency range: 5-2000 Hz Condition: used Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: L x H x W approx. 2700 x 1500 x 1800 mm Scope of supply: (See pictures) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Gkodpfx Apjz Ipx Hj Dec F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: excellent (used), functionality: fully functional, A good used VFFS Machine from Bosch Model NEL100 - with forming set and printer mounting frame - machine is equipped with print registration photocell - was in use until recently Godpfxoz H Tiye Ap Dekc Currently fitted with a 160mm flat pack forming set running a film width of 345mm Ready to Ship Worldwide Open to reasonable offers Request more pictures and videos on Whats App

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm Gkodpfxjwd N S Do Ap Doc -Weight: 24 kg

Condition: ready for operation (used), Fanuc A06B-6088-H322 # H500 Spindle Amplifier Module Version: B, SN: E4Y0020, used, minor signs of wear, 100% functional, delivery scope as shown in photos. Gkedpfxex Era To Ap Doc

Condition: ready for operation (used), Fanuc A06B-6088-H322 # H500 Spindle Amplifier SN:EA6X01300, used, normal signs of wear, 100% functional, delivery as per photos. Gjdjx Erbdopfx Ap Dekc

Condition: ready for operation (used), Fanuc A06B-6058-H227 Servo Amplifier / Servo Drive SN: F0800748-B / A350-1003-T276 / 04 – small crack in the housing (no effect on functionality), used, minor signs of wear, 100% fully functional, delivery as shown in photos. Gksdpfx Apsx Eq Szj Dec

Condition: used, Year of construction: 2016, functionality: fully functional, Beckhoff Automation Package – C5102, CP2712, AX5203, CX5020, EtherCAT I/O & TwinSAFE Description For sale is a high-quality Beckhoff automation package from an industrial production facility (year of manufacture 2016). All components come from the same system and were operated together until professionally dismantled. This package is ideal as a spare parts stock, for expanding existing Beckhoff systems, or for rebuilding an EtherCAT controller. Scope of delivery (see numbering in the photos): No. 1 – Beckhoff C5102 Industrial PC Intel Core i7-3610QE Gkodpfezrgw Rox Ap Dsc 8 GB DDR3 RAM 1 TB SATA hard drive Windows 7 Embedded Year of manufacture 2016 No. 2 – Beckhoff CP2712-1002 Panel PC / Touch Panel 12.1" touchscreen Intel Celeron 1.46 GHz 4 GB RAM Windows 7 Embedded Year of manufacture 2016 No. 3 – Beckhoff AX5203-0000-0200 2-axis servo amplifier EtherCAT 2-axis version Year of manufacture 2016 No. 4 – Beckhoff CX5020 Embedded PC with EtherCAT I/O and TwinSAFE station Beckhoff CX5020 Embedded PC Beckhoff EK1122 EtherCAT Junction Beckhoff EL6900 TwinSAFE Logic Several TwinSAFE modules (including EL1904) Several digital Beckhoff EtherCAT input and output modules Completely assembled EtherCAT I/O station with a total of 24 Beckhoff modules The complete package is preferably sold as a set. Total price: €6,490 (negotiable) Individual components can also be sold separately after consultation. Recommended prices for individual sale: No. 1 – Beckhoff C5102 Industrial PC: €1,990 (negotiable) No. 2 – Beckhoff CP2712 Panel PC: €1,490 (negotiable) No. 3 – Beckhoff AX5203 Servo Amplifier: €1,490 (negotiable) No. 4 – Beckhoff CX5020 EtherCAT/TwinSAFE Station: €2,790 (negotiable)

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW Godpfjz E U Disx Ap Dskc - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: excellent (used), Fanuc AC Servo Amplifier Gedennx Hnspfx Ap Dskc C Series Type A 06B-6066-H 233 No.F2X 00227-A22 Weight 6 kg

Condition: refurbished (used), A06B-6117-H105 Servo Amplifier, FANUC, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Gksdjzi Sv Hjpfx Ap Djc Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: ready for operation (used), Fanuc A06B-6290-H124 Servo Amplifier Version A, serial number: V17X64204. Minor housing damage, see photo. Used, with normal signs of wear. 100% functional. Scope of delivery as shown in the photos. Gsdpfxsi D Uzvj Ap Dekc