Used Temperature Bath for sale (7,117)

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. Guedpfx Aez Ahr Rskaeg The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Gedpfx Aezzcc Iskasug Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Condition: used, Year of construction: 2002, functionality: fully functional, Used KraussMaffei KM 65-160 C2 injection molding machine, manufactured in 2002, with extensive peripherals and a Frigel process chiller. Manufacturer: KraussMaffei Model: KM 65-160 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine No.: 641736 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating time: 11,481:37 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Motor current: 30 A Pre-fuse: 160 A Control system: KraussMaffei Peripherals: Material feed system, MTF elevating conveyor, hopper, flow monitoring / temperature control circuits, and Frigel process chiller Frigel process chiller: RCD80/12HP Year of manufacture of process chiller: 2013 Voltage: 400 V Auxiliary voltage: 110 V Guodpsz Almrjfx Akaog Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Medium: Water Temperature range: -5 to +90 °C Max. pressure: 8 bar Weight: 240 kg

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, The teco th 140 temperature control unit from GWK with indirect cooling is up for sale; it offers a wide range of features which I can provide upon request. The hose lines are also included. The unit will be inspected by GWK prior to delivery, with inspection costs already included in the sale price. Medium: Heat transfer oil, Marlotherm SH Heating capacity: 27 kW at up to 350°C Cooling capacity, indirect: 110 kW Pump: 150 l/min at max. 7 bar Cooling via bypass with 3-way motorized controller Shut-off valve on supply and return Connection for PT 100 sensor Gujdpfx Aox Dcd Rokajg Internal drip tray Dimensions: L: 1320 mm, W: 570 mm, H: 1720 mm Weight: 410 kg

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: BI-183/600, total length: 3,866 mm, total height: 2,841 mm, overall weight: 2,000 kg, input voltage: 400 V, track width: 600 mm, type of input current: three-phase, power: 16 kW (21.75 HP), construction width: 1,500 mm, input frequency: 50 Hz, For sale: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling, manufactured in 2009. This machine is designed for injecting brine and marinade into meat and poultry products and is suitable for professional use within the meat processing food industry. The COOL version features a cooling system, allowing the brine/marinade to be kept at a controlled temperature during the production process. This is a significant advantage for product temperature, process control, and food safety. Technical specifications: Manufacturer: Inject Star Type: BI-183/600-C COOL Machine: Brine injector Version: with cooling / COOL system Year of manufacture: 2009 Godpfx Akozxf Dijajug Connection power: 16 kW Electrical connection: 3 × 400 V / 50 Hz Minimum air pressure: 6 bar Maximum air pressure: 10 bar Machine number: BI1836-123 Stainless steel industrial version CE-marked Suitable for injecting beef, chicken, poultry, and other meat products with brine, marinade, or similar liquids. The machine can be inspected by appointment. Additional information, photos, and technical details are available upon request. English version for MachineSeeker: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling system, year 2009. The machine is designed for injecting brine and marinades into meat and poultry products and is suitable for professional use in the meat processing industry. The COOL version is equipped with an integrated cooling system, allowing the brine or marinade to be kept at a controlled low temperature during production.

Condition: excellent (used), functionality: fully functional, The Regloplas temperature control unit is for sale; it has been in operation for 17 hours. Gujdsztwr Uepfx Akajg Medium: Oil Heating capacity: 6 kW Cooling capacity: 20 kW RT 61 controller Mobile

Condition: used, Year of construction: 2018, Materials for blister packaging: PVC + coated PVC, PETG + PETG, PET GAG + PETGAG, PS + Complex, operating mode: intermittent, max. output: 12cycles/min, forming film width: 180-350mm, max. forming film diameter: 400mm, max. forming film thickness: 500µm, film transport tolerance (motor): +/-0.2mm, forming area: 150-310x100-210mm, max. sealing pressure: 950kg, max. punching pressure: 10,000kg, max. forming depth: 60mm, sealing temperature: 80-200°C, vacuum pump power: 0.75kW, vacuum pump capacity: 20m³/h, forming heater power: 4.8kW, air consumption: 34m³/h, connected load: 13kW, length: 5530mm, width: 880mm, height: 1460mm, with documentation, Videojet 1520 continuous inkjet printer and Lauda Ultracool UC-0080 recirculating chiller. An on-site inspection is possible. Gsdpfx Aez Agf Njkajug

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality Guodsxwvqqjpfx Akaog • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Condition: used, Year of construction: 2017, A Maguire vacuum dryer for plastic granulate is offered. Throughput: approx. 65kg/h, heating power: 11kW, max. operating temperature: 190°C, heating hopper volume: 70l, vacuum chamber volume: 28l, retention hopper volume: 45l, voltage: 400V/3Ph, frequency: 50Hz, current consumption: 9.7A. An on-site inspection is possible. Godpfjz Akvxjx Akaeug

Year of construction: 2000, operating hours: 1,04,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Gusdpfxox Exmto Akasg Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Gusdpfx Akex Eg T Esasg

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, External Dimensions (W x D x H)1730 x 765 x 1010 mm Internal Dimensions (W x D x H)760 x 495 x 615 mm Volume 231 litres Net Weight 318 kg Capacity (Aluminium Racks 2” Boxes) - Gsdpszb Rkujfx Akajug Capacity (Stainless Steel Racks 2” Boxes) - Cooling Performance -150 °C Temperature Setting Range -125 ~ -152 °C Temperature Control Range -130 ~ -150 °C Controller Microprocessor, non-volatile memory Display LED Temperature Sensor Pt-1000 Refrigeration System Cascade with auto-cascade low-stage Compressors 1100 W Refrigerant HFC Insulation Material PUF / VIP Plus Insulation Thickness 135 mm Exterior Material Painted steel Interior Material Aluminium Outer Doors/Lid - Outer Door Lock Y Inner Doors/Lid 2 Shelves - Max. Load - Per Shelf - Max. Load - Total 207 kg Vacuum Release Port - Access Port 1 Access Port Position left Access Port Diameter 40 Casters 6 (3 leveling feet) Power Failure V-B-R High Temperature V-B-R Low Temperature V-B-R Filter V-B Door Open V-B Power Supply 230 V Frequency 50 Hz Noise Level51 dB [A] Good working condition. Please check out our other listings as well.

Condition: excellent (used), Several HB-Therm flow meters and water distributors available. Condition: like new – from cleanroom production. The following variants are available: * 3-way * 5-way * 6-way * 12-way Guodew D Eh Iepfx Akaeg * 13-way * 16-way Note: Original new prices can be found in the attached documentation. I would like to pay 1/3 of the new price.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour Gujdpfx Akjz Ag Udsaeg - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SN24027024146, Year of construction: 2024, total length: 580 mm, total height: 910 mm, total width: 700 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Installed nozzle diameter: 0.4 mm MACHINE DETAILS Voltage supply: 100–240 V AC Power consumption: Max. 10 A Mains frequency: 50–60 Hz Frequency band: 2,400.0–2,483.5 MHz Max. radio frequency output power: < 100 mW EIRP Gsdszx S Eajpfx Akasug WLAN standard: IEEE 802.11 b/g/n Operating temperature: 18 °C for PLA up to 38 °C Max. humidity: Max. 85 %, non-condensing Dimensions & Weight Dimensions (W x D x H): 580 x 700 x 910 mm Weight with packaging: Max. 35.0 kg Weight without packaging: Max. 25.3 kg EQUIPMENT Satin powder-coated print bed PEI print bed Spool holder with material guide Power cable USB drive 5 × brass nozzle, 0.4 mm 5 × hardened nozzle, 0.6 mm Operating manual Testing information Note: Print head cable 3 must be replaced.

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Weight: 210 kg Gsdsx R A A Nspfx Akasug Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Year of construction: 2004, condition: used, Temperature range 140 °C Guodpfx Aezu Tgqekaeg heating capacity 8,0 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 m weight of the machine ca. 48 kg HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Gjdpfxezab A Eo Akasug

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Gedjznz Ezepfx Akajug Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: new, functionality: fully functional, For the gentle preservation of liquid foods with or without carbon dioxide in pre-filled bottles, jars, pouches, or cans. Depending on the type of container, 240–360 l/h can be pasteurized. A wide range of bottle shapes can be used (milk bottles, beer bottles, preserving jars, etc.). The desired product temperature and holding time can be electronically controlled between 0 and 99 minutes. The display is clear and easy to operate. Nominal heating capacity: 20,000 W (up to 360 l/h) Connected load: 20.15 kW Electrical connection: 400V 50Hz (3-phase, 16A) External dimensions: Length: 2214 mm Width: 870 mm Height (= working height): 1090 mm Water bath internal dimensions: Gjdpfx Akew Aw T Tjasug Length: 1770 mm Width: 800 mm Maximum bottle height: 330 mm Empty weight: 220 kg Water capacity: approx. 345 l

Condition: used, functionality: fully functional, The Weinreich temperature control unit is for sale. Gujdpfx Aoztwpmokasg Medium: Water Operating temperature: max. 95 degrees Celsius Heating capacity: 6 kW Cooling capacity: 12 kW Tank: 12 liters

Condition: excellent (used), Year of construction: 1999, ROHDE KE 770 S Series Kiln Five-sided heating ensures optimal temperature distribution across the entire firing range. This reliable unit is ideal for both ceramic workshops and ambitious individual creators. Key advantages: * Maximum temperature of up to 1300°C – ideal for a wide range of firing processes * Controller with 10 programs – convenience and precision in operation * New heating coils – guarantee of reaching full temperature and efficiency * Technical condition: very good – kiln ready for immediate use Gsdpfxsz Advle Akasug Technical specifications: * Chamber capacity: 770 liters * Chamber dimensions: * height: 130 cm * width: 70 cm * depth: 83 cm * Power supply: 400 V * Power: 40 kW This is a robust and proven piece of equipment that will last for many years and ensure excellent firing results.

Year of construction: 2020, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2020 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Features Touchscreen Control Temperature and Humidity Control Program Control Stainless Steel Interior Viewing Window Interior Lighting 100 mm Cable Entry Water-Cooled Condenser Rollers for Easy Transport Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Quality Assurance Electronics Testing Research and Development Endurance and Aging Tests Workshop Testing The climate chamber has been workshop-tested. Functional test carried out. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Gusdpfx Akezntxmjaog Note Collection or shipping via freight forwarder possible by arrangement. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, Gjdpfjzg Dlbox Akasug 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: good (used), Year of construction: 1998, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg Gujdpfx Asiyzn Ijkaeg