Used Temperature Bath for sale (6,927)

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Nlodpfx Aey H Dlqog Djf Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for the Thermo Scientific 1blck Drybath Standard 1 Includes 1 No 12 Block usually retailing around £60+ Nljdpfx Ajy Iw A Ssg Dof The unit is in full working condition and is ready for immediate release. The Thermo Scientific Drybath Standard 1-block is a laboratory dry bath/block heater designed to provide precise, controlled heating for a variety of sample tubes using a removable heat block. It’s widely used in molecular biology, biochemistry, and general lab workflows where incubation or heating of tubes at set temperatures is required.

Condition: used, This listing is for the Thermo Scientific 1blck Drybath Standard 1/12 Block Nlsdpfx Agsy Iw D Ns Dof The unit is in full working condition and is ready for immediate release The Thermo Scientific Drybath Standard 1-block is a laboratory dry bath/block heater designed to provide precise, controlled heating for a variety of sample tubes using a removable heat block. It’s widely used in molecular biology, biochemistry, and general lab workflows where incubation or heating of tubes at set temperatures is required.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Nedpoztp Dpofx Ag Djlf THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. 2 temperature sensors for CargoWatch FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4000mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 8 mm Middle right - 8 mm Rear left - 14 mm Rear right - 5 mm

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm Nlsdpfxjxnqt Us Ag Dsf The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. Nsdsztw Agopfx Ag Dslf TECHNICAL DETAILS Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Granulator Vacuum degassing Segmented screws and cylinder

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Njdpfx Aozump Eog Djlf Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), temperature: 90 °C, total length: 1,500 mm, total height: 2,450 mm, overall weight: 790 kg, actuation type: electric, The BDX-F2000 Drying Hopper Mixer is a high-capacity industrial unit designed for simultaneous drying and mixing of plastic granules before processing. By combining efficient hot-air drying with continuous material agitation, the system ensures uniform moisture removal and consistent material quality throughout the entire batch. Technical Specifications • Model: BDX-F2000 • Hopper capacity: 1800 L • Heating power: 18 kW • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 500–1000 kg/h (depending on material) • Dimensions: 2450 × 1500 mm • Weight: 790 kg • Material of construction: AISI stainless steel Model: BDX-F1000 • Hopper capacity: 900 L • Heating power: 14 kW • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 300–500 kg/h (depending on material) Nledszvxc Hspfx Ag Djf • Dimensions: 2300 × 1100 mm • Weight: 690 kg • Material of construction: AISI stainless steel Efficient Drying and Mixing The BDX-series combines two essential processes into one machine: • Hot-air drying for efficient moisture removal • Continuous screw mixing for uniform temperature distribution The integrated mixing system continuously circulates the material inside the hopper, preventing localized overheating and ensuring that every granule receives the same drying conditions. This results in faster, more consistent drying and improved processing stability. The hopper is manufactured from high-quality stainless steel. Applications The BDX-series is suitable for drying and mixing: • PE (LDPE & HDPE) • PP • PVC • PET • ABS • PA (Nylon) • PC • Engineering plastics • Virgin material • Recycled plastic granules • Masterbatch blends It is ideal for extrusion, injection molding, blow molding, compounding, and recycling operations.

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDT Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW Nlsdpjzv Emlsfx Ag Djf • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Njdpfx Aozv Sbiog Delf Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 02/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. 2 temperature sensors for CargoWatch Nledpfx Ajzv Ih Seg Dof FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: used, Year of construction: 2024, functionality: fully functional, Year of manufacture: 2024 Cutting ranges: Nljdpfjzv Th Dex Ag Dof Cutting range 90° round 360 mm Cutting range 90° flat (W x H) 360 x 360 mm Clamping range 0 - 360 mm Smallest section length 10 mm Smallest dimension to be cut 10 x 10 mm Shortest remaining piece length in automatic operation (only possible with geometrically flawless surfaces) 35 mm Shortest remaining piece length in single cut 10 mm Dimensions and weights: Overall dimensions (L x W) 1,650 x 2,900 mm Height 2,030 mm Material support height 700 mm Weight 3,450 kg Performance characteristics: Saw motor, frequency-controlled 4 kW Total connected load 6 kW Single material feed length 500 mm Multiple feed length 9,999 mm Machine roller track, length 1,100 mm Ball-bearing mounted, robust transport rollers 8 pieces Roller diameter 60 mm Roller axle spacing 135 mm Cutting speed, continuously variable 12 - 150 m/min Saw blade dimensions 6,096 x 34 x 1.1 mm Alternatively 6,096 x 41 x 1.3 mm Cutting feed: electrically adjustable via ball screw Material feed: ball screw Material clamping: hydraulic Saw blade cleaning: self-adjusting chip removal brush, electrically driven Coolant: Pump capacity 75 l/min at 2 m head, Coolant tank volume approx. 100 l Paint finish: Light grey RAL 7035, anthracite grey RAL 7016 textured paint Compressed air connection: approx. 6 bar required (customer-side) KASTO sawing machine control ProControl 9" Hardware  Industrial PC, fanless, no moving parts  Robust metal housing, aluminum front panel  Resistive touchscreen  Color TFT display 9"  Ambient temperature 0 - 50 °C  Protection class, front: IP65 Software  Operating system Windows 10 Enterprise LTSC 2019  SIMATIC S7 - 1500 Failsafe Software Controller CPU

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection Nlsdpfxjzv Rhus Ag Djf - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: used, Manufacturer: Kaeser Kompressoren (manufactured by SPX Flow Technology Germany GmbH) Model: F350KB Serial Number: 901620.0-1098 Year: 10/2018 Capacity: 34 liters (8.98 US liquid gallons) Max. operating pressure: 16 bar Min. operating pressure: 2 bar Nlodozwgcqjpfx Ag Djf Design temperature: 3-66 °C

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 07/2023, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,981 mm, total width: 2,474 mm, total height: 2,546 mm, loading space length: 3,350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Internal Number: 5111.TZ23.PY89939 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Airbag (passenger side) * Bi-Xenon headlights with static cornering lights, LED daytime running lights including automatic headlight range adjustment * Seat Package 6A: Driver's seat manually adjustable in 4 ways - Individual passenger seat manually adjustable in 4 ways - Headrests with height adjustment - Interior armrest for driver and passenger - Individual seat - Lumbar support for driver's and passenger's seats - Seat cover: Partial leather upholstery * Technology Package 13 (4x4): Heated windshield - Windshield wipers with rain sensor - Park pilot system front and rear - Active emergency brake assist (radar-based) - Lane keeping assist with driver drowsiness warning and automatic high beam assist - Headlight assist with day/night sensor - Adaptive cruise control - Rearview camera - LED downlight, fog lights - Exterior mirrors electrically adjustable, foldable and heated - Automatic climate control - Ford audio system with 12-inch multi-function display and Ford SYNC4 OTHER EQUIPMENT * 1 battery * Axle load increase - front to 1850 kg * Airbag driver side * All-wheel drive * ABS with electronic brake force distribution - ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support including emergency brake light * Exterior mirrors, electrically adjustable and heated - with integrated turn signals Nledpfx Agoznrcds Def * Battery: Battery life, battery life programming to 10 minutes * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Double-wing rear door with 180° opening angle (without window) * Front power windows - with quick-down/-up function for driver side * Ford Easy Fuel - Convenient fuel filler cap and misfueling protection * Generator * Glove compartment with lockable lid * Interior lighting with delay function with front reading lights * Cargo area lighting * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Particle filter: Diesel particulate filter * Wheels: Alloy wheels 6.5 J x 16 in 10-spoke design * Wheels: Tire repair kit * Headlights: Halogen headlights with daytime running lights * Sliding door entry light, activated automatically when the door opens * Sliding door, right * Side protection strips * Power steering * Seat belts - Seat belt pretensioners and force limiters front * Rear bumper, with integrated step * Partition (plastic) at the height of the B-pillar * Lashing eyes * Immobilizer * Heat-absorbing tinted glass * Central locking with remote control - additionally with a second folding key with remote control including central locking * Overhead storage compartment, front ...and more. ----1st owner. German version. Errors and prior sale excepted. 2 years manufacturer's warranty from registration (can be extended on request). We will gladly accept your vehicle in part exchange. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you! Although existing checks are carried out, a deviation of the vehicle from the description above cannot be ruled out, we would like to point out that the vehicle description only serves to generally identify the vehicle and does not constitute a guarantee in the legal sense. Only the agreements

Condition: excellent (used), Year of construction: 2014, 511 USED W&P Matador MDE 125 electric baking oven. IMPORTANT: The baking chambers are lined with ceramic on the top. Nedjzuggdopfx Ag Djlf Each baking chamber can have a different baking temperature. INTERNAL DIMENSIONS OF THE BAKING CHAMBER (in cm): - W: 120 - L: 200 TECHNICAL DATA: - year of production: 2014 - baking area: 12 m² Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Nlodpfx Agezvmy Hs Dsf Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm Nljdpfxjyx Tnre Ag Def height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Compressor station – sound-insulated container with 2 compressor units 2 units SPX Hankison GmbH Type HHL 450 – a compressed air adsorption dryer (desiccant air dryer) for industrial compressed air systems. It is used to remove moisture from compressed air to prevent corrosion or freezing in machines, valves, or pneumatic systems. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers These units operate with desiccant material (adsorption granulate) that binds water vapor from the compressed air. *

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm tank capacity: 800 l Nedpsymc Txjfx Ag Dolf Heating: 45 KW cycle time: - sec Heating capacity: 45 kW container volume: 800 l electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 70 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.8 x 3,3 m dimensions of the machine approx. HxWxD: 3,1 x 3,3 x 3,72 m internal dimension: 1,8 x 1,0 x 1,0 m *

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Nlodjznkx Djpfx Ag Def Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2016, Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical parameters: Laser type: Fiber laser Source power: 3 kW Working area: 3000 mm × 1500 mm Nljdpoyhppvofx Ag Dsf Laser source: Rofin FL030 fiber laser source Source serial number: 987 Source year: 2015 Additional equipment: Thermotec chiller – cooling unit for stabilizing the laser source temperature Donaldson Torit DCE DFPro-4SPK – extraction and filtration system for laser fumes Automatic loading/unloading table Light guard – light protection system

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Nedpezwvtxjfx Ag Dolf Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm Nljdjw Tfw Hjpfx Ag Dsf HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, mileage: 1,98,000 km, power: 120 kW (163.15 HP), first registration: 11/2010, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, loading space width: 1,780 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Get in touch with our sales advisor quickly and easily. Important! Sales are primarily to business customers. Internal ID Number: [3230] ----Optional Services Available: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV (tech inspection) & emissions test * Nationwide delivery * Financing possible, even without down payment * Spring Offer: On request and for a surcharge of only €999, increase of the towing capacity to up to 3,500 kg (vehicle- and manufacturer-dependent) ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German specification vehicle * Ready for immediate use Nledpfxsyy Hpxo Ag Dsf * Euro 5 emissions standard * High roof + long wheelbase * Sliding doors on both sides (left & right) * Tow bar: 3,500 kg towing capacity * Automatic climate control * Cruise control * Auxiliary heater * Cargo area racking + ramp * Rear-view camera * Reinforced rear axle Special equipment: Passenger airbag, hill start assist, tow bar: ball head for increased towing capacity – 3.5 t, 13-pin trailer socket, Audio/Navigationsystem Audio 50 APS, outside temperature display, 100 Ah battery, cargo area ceiling light with door sensor, digital tachograph, remote control for auxiliary heater, 180 A alternator, rear door (opening angle 270°), multifunction steering wheel incl. trip computer, full-size spare wheel, spare wheel holder under frame incl. jack, rear-view camera, left sliding door (cargo/passenger compartment), three-seater bench in cabin, reinforced front & rear stabiliser, fuel sender for auxiliary heater, cargo/passenger area lining: plywood, additional water heater Further equipment: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors, mirrors with integrated indicators, brake assist, ABS+ASR (traction control), cab roof lining, lockable glove compartment, body: Standard high-roof van, child safety locks, main fuel tank: 75 L, full bulkhead, lashing points, headlight range adjustment, engine 2.1L – 120 kW CDI CAT, wheelbase 3665 mm, smoker package, low emissions Euro 5 standard, right sliding door, seat cover/upholstery: Lima fabric, maintenance interval indicator Assyst, heat-insulating glazing, gross vehicle weight 3.5 t ----Interested in leasing or financing? We offer attractive rates – also possible with zero down payment! Please contact us for further details. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All information on the internet is non-binding and intended solely for general vehicle description. Errors, typographical mistakes, and prior sale reserved. The only binding specifications are those in the purchase contract or written confirmation. Vehicles with a mileage above 50,000 km or older than 3 years are primarily sold to our business customers.

Condition: used, mileage: 8,00,000 km, power: 110 kW (149.56 HP), first registration: 08/2008, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro4, number of seats: 20, Equipment: ABS, air conditioning, navigation system, parking heater, Chat via WhatsApp now: Quick & easy contact with one of our sales consultants. Attention !!! Preferential sale to business customers only. Internal ID number: [3277] ----Optional add-ons available: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emissions test * Nationwide delivery * Financing possible even without down payment * Spring offer: Upon request and for an additional charge of only €999, increase the towing capacity up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle Highlights: * Regularly serviced * German vehicle Nljdpey Ikq Nsfx Ag Djf * Maxi XXL version * 19 + 1 seats (total 20 seats) * Automatic transmission * Panoramic glass * Auxiliary/parking heater * Automatic climate control + rear climate + rear heating * Xenon headlights Special equipment: 1 DIN slot at the front under headliner, outside temperature display, single-pole battery cutoff switch, bi-xenon headlights with cornering light, roof control unit with reading spots driver/passenger side, entry lights, digital tachograph, windows for rear doors, rear door windows in privacy glass, fixed windows in cargo/passenger compartment: front left & right, main fuel tank 100 L, steering wheel (mechanically adjustable steering column), metallic paint, front engine PTO with bracket for additional coolant compressor, programmable special module, interior rear-view mirror, right-hand power sliding door, front mud flaps, comfort headrest, driver’s seat, heated driver’s seat, comfort suspension seat driver’s side, reinforced rear stabilizer, reinforced front stabilizer, additional heater fuel sender, AGM battery 95 Ah, prep. for auxiliary heat exchanger, reinforced front axle, driver cab thermal insulation, electric auxiliary air heater, additional 10 kW hot water heater with timer Further features: 3rd brake light, driver’s airbag, washer fluid level indicator, both side mirrors electrically adjustable & heated, side mirrors with integrated indicators, brake assist, driver cab roof lining, lockable glove compartment, rear door (180° opening angle), body/construction: high-roof box standard, child safety lock, full-length load compartment partition, cargo securing/tie-down rings, headlight range adjustment, engine 2.1 L – 110 kW CDI CAT, wheelbase 4325 mm, tire repair kit with compressor, low emission as per Euro 4 Gr. III standard, right-hand sliding door cargo/passenger compartment, adjustable co-driver’s seat in cab, maintenance interval indicator ASSYST, thermal insulated glass, gross vehicle weight 5.00 t, twin tires on 2nd/rear axle ----Looking for leasing or financing? Attractive offers available – even without down payment! Contact us for details. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All online information is non-binding and only serves as a general vehicle description. Errors, misprints, and prior sale excepted. The binding specifications of the vehicle are set exclusively by the on-site purchase contract or written assurances. We only sell vehicles with a mileage over 50,000 km or older than 3 years...