Used Temperature Control Machine for sale (93,501)

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Suitable for GMP environments Dodpfx Asyl Iwteptjkt Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available

Condition: good (used), Version with key switch Area of application: Lisec machines Width: 425 mm Height: 160 mm Depth: 50 mm Dkedpfx Asyr Inleptjt Weight: 1078 g Condition: Good, second-hand

Condition: excellent (used), LAUDA LTH 303 Temperature Control Unit / Heating Unit for Tool Temperature Control We have 3 LAUDA LTH 303 temperature control units for sale, all in very good condition. These units are ideally suited for temperature control of extrusion tools, nozzles, calibration dies, injection molds, and a wide range of industrial applications. All units are fully functional, immediately available, and can be inspected at our facility in Wuppertal at any time. Technical Data * Manufacturer: LAUDA * Model: LTH 303 * Year of Manufacture: 1990 * Heat Transfer Medium: Oil * Max. Supply Temperature: up to 350 °C * Connection Voltage: 220 V * Heating Power: 3.2 kW * Frequency: 50 Hz Features Dkedszpxcyepfx Aptot * Digital temperature display * Integrated circulation pump * Compact, robust industrial design * User-friendly control * Ready for immediate use

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, DGUV certified until: 07/2027, Jufeba temperature control unit Tabletop model: TG 2-2 T Stainless steel design Dry heating Dkjdpfet U Uxujx Aptst Simple temperature control Top-quality technology Connection: 230V, ready for plug-in Dimensions: 575 x 825 x 220 mm (W x D x H) Used unit, cleaned & SAB inspected Many other temperature control units in stock!

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Dedpfx Asx Emfwsptekt Cooling capacity: 30 kW Heat transfer medium: Water

Condition: used, Available quantity: 6 units Dkjdpfx Aezmm I Ssptet Functionality tested; item originates from the dismantling of equipment at an automotive supplier Manufacturer: BBH Products GmbH Model: SMX31 Type: Safety module for machine control Supply voltage: 24 V DC Function: Monitoring of emergency stop buttons, door interlocks, and light curtains Approval: EN ISO 13849-1, SIL 3, PL e Interfaces: safe inputs and outputs

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, type of input current: AC, input current: 10 A, DGUV certified until: 06/2027, Jufeba TG 1-3 T temperature control unit TOP table-top unit with container Stainless steel design Dry heating system Manual temperature control Robust technology 230V connection Used unit, cleaned With warranty + spare parts service Djdpfx Ajxiu Hbsptokt Optional: Maintenance contract Stainless steel GM container Delivery service Training & commissioning Visit our large showroom!

Condition: good (used), Year of construction: 1999, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate Dkodpsqmt Acofx Aptjt -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot Djdpfxsya Iaqo Aptskt - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Djdozkbirspfx Aptskt Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system Dkjdpet Ac Efjfx Aptst - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays Dkjdpfxem Dtm Aj Aptst - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dkjdpfx Apoydvzdstet Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Dsdpfx Aeyrtk Septokt Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Dsdoxpqy Dopfx Aptskt Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Dsdpfxjzdr Edo Aptekt Weight: approx. 920 kg Type: TS 1800 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, Manufacturer: Siemens Product series: SINUMERIK Type: Machine control panel MCP 483 Article number: 6FC5203-0AF22-1AA2 Interface: MPI / PROFIBUS-DP Width: 19 inches Button type: Membrane buttons Dkodpfx Aszcguljptot Emergency stop: 22 mm emergency stop button

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Dksdpfx Asy Suavsptjt

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. Dodpewf Anhofx Aptekt 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Dedpfx Apezkkc Uetekt Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Dkodpfoy Su Efsx Aptst

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Djdpfxszav D Ds Aptjkt Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Dedpfxey Su D Us Aptjkt

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Dkedezy Upkjpfx Aptst Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Dksdpfxjzd Rtyj Aptet Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.