Used Temperature Controle for sale (45,550)

Condition: good (used), Thermostat, sensor, process controller, controller, temperature controller, temperature sensor, setting for temperature -Manufacturer: Gefran , temperature controller -Type: 500-RO-RO-1 -Number: 4 controllers available -Price: per piece Tjdpfx Ajg Uggwjbzed -Dimensions: 110/50/H60 mm -Weight: 0.2 kg

Year of construction: 2025, condition: new, We are manufacturer of temperature control unit (Thermoregulator), so we are able to produce every capacity devices you need. Technical data: Todpfxjhby Iro Abzjd Brand: Churchill ISI-TAN Model: CH220x2 Heating Capacity: 20kW (with oil) Operation Range: 300C (oil) Pump: 90x2 l/min,8bar, 1,5kW (German brand) Power Consumption: 21,5 kW Voltage: 400/50Hz, 3phases Delivery cost is not included

Condition: excellent (used), Vötsch Model: VT³ 4150 Vötsch Temperature Test Chamber, Air-Cooled Temperature Testing Temperature Range: -40°C to +180°C Rate of Change: Cooling approx. 2.5 K/min Rate of Change: Heating approx. 3.5 K/min External Dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test Chamber Dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 11.5 kW Rated Current: 22.0 A Weight: approx. 1020 kg / 1540 liters Tsdjw Ehutspfx Abzod Refrigerant: R 404A For your safety as a buyer, please note the following information: We perform the following steps on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Year of construction: 2000, condition: good (used), Number: 0107058 Cooling capacity: 1,100 W at +6° C Cooling capacity: 1.270 kcal/h at +6° C Max. temperature: 44 °C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Todpfx Abehri Ahszod Weight: 80 kg

Condition: used, functionality: fully functional, total height: 3,500 mm, tank capacity: 17,800 l, inner diameter: 2,800 mm, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 17,800 litres - Material: 316 L - Interior finish: Cold rolled - Exterior finish: Cold-rolled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 1 thermometer - Lifting rings Tjdpew Uqkbsfx Abzed RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 level gauge with tap BOTTOM - 2% sloped base with drain - 1 full drain valve with plug DIMENSIONS - Diameter: 2800 mm - Ring height: 2800 mm - Total height: 3500 mm ADDITIONAL INFORMATION - 6-month warranty - Complies with CE standards

Condition: good (used), functionality: fully functional, Power: 6370 watts Maximum operating temperature: 95°C Tedpfx Aev R Edwebzed Medium: water Two units available! Price per piece! Price for two temperature control units: 900 EUR!!!

Condition: excellent (used), Temperature sensor, channel temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system, temperature transmitter -Manufacturer: Alfa Laval, temperature sensor control system unused in original packaging -Type: TT1 .: 597256 01 ..: 90/00555033 -Measuring probe: screw-in length approx. 50 mm, see photos -Quantity: 3x temperature sensors available -Price per piece Todpfx Abeq Rx Axezsd -Dimension: 160/110/H70 mm -Weight: 0.4 kg/pc.

Year of construction: 2025, condition: new, From manufacturer very good quality heat control unit (Thermoregulator) for sale. Technical data: Brand: Churchill ISI-TAN Model: CH18 Heating Capacity: 9kW (oil or water) Cooling: 90C/40 kW Operation Range: 0-90C (water), 0-150C (Oil) Pump: 60l/min (German brand) Power Consumption: 10 kW Voltage: 400/50Hz, 3phases Tjdpfx Aognlf Hsbzjd VAT and delivery cost is not included

Condition: excellent (used), Vötsch Model: VTS 7018-5 Water-cooled Temperature Test Chamber System retrofitted with R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm Tedpfowq Iymox Abzsd External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (on-site): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69dB (A) Side port: 50 mm / 125 mm Chamber is water-cooled Refrigerants: R-452A and R 23 Weight approx. 460 kg For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data may be subject to change or error!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), Several HB-Therm flow meters and water distributors available Condition: as new – from cleanroom production The following versions are available: 3-way 5-way Tjdjw D Eh Iopfx Abzjd 6-way 12-way 13-way 16-way Note: Original new prices can be found in the attached documentation. I purchase all machines and peripheral devices directly from customers at a fair price. The subsequent sales price is calculated reasonably so that all three parties – seller, buyer, and myself as the intermediary – make a small, fair deal. Unsolicited purchase offers from various used machinery dealers are therefore not welcome.

Condition: ready for operation (used), Autotherm Heat • Climate • Cooling AWF 95-9– 9.7 kW – Made in Germany ● Pressure: 5.4 bar Model: AWF 95-9 ● Year of manufacture: 10/2004 ● Supply voltage: 400 V / 3 phases / 50 Hz ● Connected load: 9700 Watt Tsdpfsvgrr Tjx Abzed ● Medium: water ● Total power requirement: 9.7 kW ● Amperes: 15 ● Pressure: 5.4 bar ● Device No.: 01 550 Complete unit with electronic control, mounted on transport wheels. Perfectly suited for use with injection moulding machines. Visual and technical condition very good.

Condition: ready for operation (used), Year of construction: 1998, Nominal heat output: 460kW, max. nominal consumption: 1000W, have been regularly serviced. Only one boiler available. Expected to be available from September 2025. Todpjnmy Dijfx Abzjd

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller, PID controller -Manufacturer: Eliwell, Digital Temperature Controller PID Controller -Type: EWTR 940/h -Quantity: 1 controller available -Dimensions: 120/70/H70 mm -Weight: 0.4 kg Tsdew A Iuujpfx Abzjd

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Tsdpfx Aewf Anhsbzed Good working condition. Please check out our other listings as well.

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Todpjwyu H Eefx Abzed Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Todpfxogqr A De Abzod

Year of construction: 2018, condition: as good as new (ex-display), Frigel Water Temperature Control Units, like new, 400 V, 32 A, up to 90 degree Todpfx Asi Tx Dnobzsd

Condition: ready for operation (used), Year of construction: 2009, Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes. Tsdpfxewhfmle Abzsd

Condition: new, functionality: fully functional, Year of construction: 2024, The temperature control unit from the company is available and has not been put into operation. Medium: Water Tedpfx Abew Rb Hfszod Heating capacity: 27 kW Cooling capacity: 175 kW VA: Mould drain (vacuum) FM: Flow monitoring MKVI: Touch screen

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Tsdswylv Djpfx Abzjd Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), RS Simulators Here we offer a test cabinet. Water cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800mm (WxHxD) Outer dimensions: 1100mm x 1850mm x 1500mm (WxHxD) current consumption: 13,5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Todpfx Ajg Urq Ijbzjd Type: TS 600/45 Explosion proof operation not tested but Max 160°C in this Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss temperature shock test chamber air cooled Todek E Htyopfx Abzjd ( Compressor was renewed ! ) Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot-/cold chamber 10 s Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with swivel arm ) without....ca. 1820 mm with....ca. 1915 mm Depth ( without and with test chamber door ) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you Thermotron temperature chamber. Water cooled Thermotron temperature chamber SE-1000-6-6 Inner dimensions: WxDxH 1000 x 1000 x 980 mm Working volume: approx. 980 liters Temperature range: -70ºC to 180ºC Heating up total : ca 4,1 K Cooling down total : ca 1,2 K Heating power in ºC/minute -65º to 71ºC: 6.8ºC Heating power in ºC/minute -65º to 180ºC: 5.6ºC Heating capacity in ºC/minute -40º to 85ºC: 6.5ºC Cooling capacity in ºC/minute 85º to -40ºC: 4.7ºC Cooling capacity in ºC/minute 71º to -65ºC: 3.7ºC Cooling capacity in ºC/minute 180º to -65ºC: 4.3ºC External dimensions - WxDxH: 1250 x 1900 x 2200 mm Electrical requirements 400V/5P/N/PE 35 A Tsdpfx Absixtitezjd Refrigerants: R508B and R404 A Approx. weight: 900 kg Type: Thermotron SE- 1000-6-6 For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Type: HT 7010 Heraeus Vötsch temperature test cabinet, water-cooled Temperature deviation in time ± 1 K Temperature deviation in space ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x side feedthrough 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Todpehhyz Sefx Abzsd Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Autotherm Here we offer you a 6-circuit temperature control device. Without active refrigerating machine! According to the enclosed technical brief description: Temperature range: -40°C ... +85°C (extended temperature range -40°C...+130°C) increased heating power 27 kW instead of 18 kW with 1x temperature control included in the main line with 6x temperature measurement in the respective flow included with 6x temperature measurement in the respective return included with 6x volume flow and pressure measurement in the respective flow included with 6x volume flow and pressure control included 1l/min ... 12 l/min and 0.1 bar ... 3 bar incl. release control incl. FU-controlled pump in the main line incl. 6x 3-way valve with 6x additional overflow valve 2 ... 12 bar adjustable included preset to 2,4 bar with filling and draining device included for all circuits together/simultaneously incl. 50l integrated tank incl. pneumatic emptying function with control S7 incl. included Energy saving and cooling capacity extension: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity at a flow temperature of +20°C: 50 kW. This increases the cooling rate in this temperature range and saves energy due to the lower running time of the refrigerant compressor. (Footprint of the basic unit according to data sheet increases by approx. 0.3 m²) Assembly in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm 1x additional, closed switch box min. 600x600x2000 mm (for control/electrics) Supplied via on-site or optional cooling medium supply Tedpskn Niljfx Abzsd Flow temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h continuously controlled For cooling capacity a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale ex location! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.