Used Temperature Controller for sale (44,742)

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate Kjdpfxsixtits Abcolp 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: Kjdpfxevb Hano Abcelp - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 Klodpfxevb E Uqo Abcsp T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) Ksdpfx Aowwg Uvjbcslp (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control Modicon -Output module: Type: Modicon TM3DQ16T 1 pc. -Input module: Modicon TM3AI8 3 pcs. -Trigger module: Modicon TMAQ4 2 pcs. -Shipping/Price: complete -Dimensions total: 150/90/H90 mm Klodpjxn Nm Hefx Abcop -Weight: 0.7 kg

Condition: used, Year of construction: 1997, functionality: fully functional, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, We offer this used Allen-Bradley SLC 500 control unit, year of manufacture 1997. POWER SUPPLY ... 400 EUR INPUT MODULE ... 300 EUR OUTPUT MODULE ... 300 EUR Model: 1746-P2 Series: C Supply voltage: 85–132 V AC Supply voltage: 170–265 V AC Frequency: 50/60 Hz Output current at 5 V DC: 5 A Output current at 24 V DC: 0.96 A Max. user current at 24 V DC: 0.2 A Replaceable fuse: 250 V–3 A Temperature code: T3C Class and division: I, Groups A, B, C, D, Division 2 Conductor insulation: copper, 75 °C Ksdpfx Asyutfhebcelp Country of origin: Malaysia Year of manufacture: 1997 If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Approx. 3.300 spindle running hours Technical details turning diameter 570 mm turning length 1500 mm control Siemens Sinumerik 840 D SL swing diameter over face slide 365 mm bed width 360 mm spindle bore 62 mm spindle turning speed range 6 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min max. workpiece weight -without tailstock 400 kg max. workpiece weight between centres 1000 kg Kjdpfx Abeytdy Hjcslp max.workpiece weight:each extra steadyrest 300 kg tailstock quill diameter 100 mm tailstock quill stroke 190 mm power capacity (60/100 % ED) 25 / 20 kW max. torque on the spindle 1800 / 1400 Nm weight of the machine ca. 5,2 t dimensions of the machine ca. 4,33 x 2,15 x 2,00 m With documentation, chip conveyor, steady-rest, accessories (see picture)

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Klsdpsd Rmcmofx Abcsp Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Ksdpfx Aeh Hvk Aobcelp Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Kledexw Ii Sopfx Abcop Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: used, total height: 1,700 mm, total length: 1,800 mm, total width: 850 mm, Empty weight: 200 kg Price: On request - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 2 - Filter length [mm]: 1300 - Filter diameter [mm]: 500 - Filter surface area [m²]: 5 - Connection diameter [mm]: 250 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Collection bags: Yes - Number of bins/bags [pcs]: 2 - Voltage [V]: 400 - Current consumption [A]: 7 - Fuse [A]: 16 - Power [kW]: 4.0 - Transport dimensions: 1800mm x 850mm x 1700mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Kjdpfeytcptjx Abcjlp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Rittal Enclosure Cooling Unit TopTherm SK 3302.9540 Manufacturer: Rittal GmbH & Co. KG Series: TopTherm Device Type: Enclosure Cooling Unit Model: SK 3302.9540 Item Number: 33029540 Supply Voltage: 400 V Frequency: 50 Hz / 60 Hz Kledpjyr Acdofx Abcop Phases: 3~ Nominal Current: 3.8 A (50 Hz) Starting Current: 7.5 A Protection: 6.3 A Application: Air conditioning and cooling of control cabinets in industrial installations Condition: unused, original packaging on pallet

Condition: like new (used), PILZ Safety Controller PNOZ m B0 772100 Base Unit Manufacturer: Pilz GmbH & Co. KG Type: Base unit safety controller Kledpfx Absyrz Ufocep Series: PNOZmulti Model: PNOZ m B0 Article number: 772100 Internal reference: 90010021010 Design: Base unit for modular safety control system Display: Integrated display Status indicators: Power, Run, Diag, Fault Mounting: DIN rail mounting

Condition: excellent (used), ABB IRC5 Controller USED,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Kodpoxq Tvdsfx Abcelp

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller,20% discount at order more then 1 unit. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Kledpfexq Tumjx Abcep

Condition: excellent (used), Year of construction: 2014, ABB IRB7600-340/2.8+ IRC5 controller+TPU DEVELOPMENT OF GSG ROBOTICS Kledpfjxq Tuasx Abcop GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10+IRC5 controller+TPU-Low DTC Ksdsxq Tt Nepfx Abcslp DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, Year of construction: 2022, ABB IRC5 Controller NEW DEVELOPMENT OF GSG ROBOTICS Klsdpsxq Ttvjfx Abcop GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 Robot and IRC5 controller-TPU-RW6.X DEVELOPMENT OF GSG ROBOTICS Kodpoxq Tq Ujfx Abcslp GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS Klodpfx Abjxq Tq Ijcep GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Lathe – cycle-controlled | Brand: SEIGER | Type: SLZ 2000 Year of manufacture: 2011 The machine can be inspected by appointment. Condition: Fully functional / ready for operation. Operating hours (February 2026): approx. 15.289 h TECHNICAL DATA Working area: - Center distance: 4.000 mm - Swing diameter over bed rail: 2.000 mm - Swing diameter over cross slide guide: 1.400 mm - Cross slide travel: 760 mm - Bed width: 1.350 mm Turning tool: cross-section (height x width) 40 x 40 mm Turning spindle: - Spindle diameter in front bearing: 300 mm - Spindle bore: 120 mm Main drive AC: - Drive power 100% / 60% duty cycle: 54 / 70 kW - Max. torque at the spindle: approx. 18.000 Nm - Speed range: 3 - 450 rpm Tailstock: - Quill diameter: 320 mm Permissible workpiece masses: Kedpfx Asyq Rwtjbcjlp - Between centres without steady rest: 18 tons Weights: - Machine: 24 tons Space requirements/dimensions (Length x Widt x Height): - Machine without cladding: 10,5 x 4,2 x 2,8 m Electrical: - Supply voltage / rated frequency: 400 V, 50 Hz - Power consumption main drive: 54 kW EQUIPMENT / ACCESSORIES: - Control system: SINUMERIK 840D pl - 2 x chip conveyors - Documentation - CE marking No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,000 mm, turning diameter over top slide: 570 mm, quill diameter: 340 mm, We are selling a Seiger SLZ570E cycle lathe. The machine was used for single-part production and is in very good condition. It is sold with a large amount of accessories, which can be inspected on site at our premises. Technical data: Control: Heidenhain Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Bed width: 350 mm Spindle head according to DIN 55027 size 8 Kledpfx Absyrb Hbjcep Tailstock quill diameter: 90 mm Tailstock quill stroke: 180 mm Tailstock taper: MK 5 Centre distance: 1,000 mm

Condition: refurbished (used), Manufacturer: Siemens Series: SINUMERIK Type: Operator panel front Kjdpfxsyryggo Abcolp Part number: 6FC5203-0AF02-0AA0 Item number: 204558 Drawing number: 90210001109

Condition: like new (used), Bosch Rexroth Control Valve 4WRPEH 6 C4B15P-3X/M/24A1, R901382359 Kodpfx Asyrx Txsbcelp Unused item from stock clearance Manufacturer: Bosch Rexroth Type: 4WRPEH 6 C4B15P-3X/M/24A1 Material number: R901382359 Valve type: Proportional directional control valve with integrated electronics Size: 6 Valve function: 4/4-way valve Actuation: Electric, with integrated electronics (OBE) Supply voltage: 24 V DC Control signal: ±10 V Nominal flow rate: 15 l/min Maximum flow rate: up to 30–40 l/min (depending on version) Maximum operating pressure: 350 bar Port pattern: ISO 4401-03-02-0-05 Mounting type: Subplate mounting Electrical connection: 7-pin connector (6+PE) to EN 175201-804 Seal material: NBR Weight: approx. 3 kg Protection class: IP65 with suitable connector Short description Direct-operated proportional control valve with electrical position feedback and integrated electronics for the precise control of flow and direction in hydraulic systems. Suitable for position, speed, and pressure control applications.

Condition: used, functionality: unexamined, Ferwood Code: RU0010622 - Manufacturer Code: 2-083-01-0276 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 3KG - Dimensions: 36X26X21 cm - If interested, we offer a refurbishment service. Please contact us. Kljdpoyrq Alsfx Abcsp