Used Temperature Controller for sale (44,742)

Condition: used, A Wittmann temperature control unit is for sale Medium: water Heating capacity: 7 kW Kodoxx R Sxjpfx Abcslp Cooling capacity: 56 kW Operating temperature: max. 90°C

Condition: like new (used), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, The temperature control unit from GWK is available for sale; it includes options such as stainless steel plate heat exchanger, manual filling, analog interface via HAN-7 plug, and device front prepared for a Powerlink interface (2 x M12 plugs). Operating temperature: max. 130°C Medium: heat transfer oil Heating capacity: 6 kW Cooling capacity: 29 kW Kjdpfjxx R Rbsx Abcslp

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser Kledpfxsg Ewwrs Abcop -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2019, condition: like new (used), functionality: fully functional, The equipment originates from toolmaking, thus has seen very little use. The ENGEL machine has only 6,520 operating hours. The temperature control units have also only been used within this context and have a maximum of approximately 7,500 operating hours. Kedexk Txxepfx Abcslp Price: €3,850 per unit. 2 units remain available out of the original 15.

Year of construction: 2020, condition: good (used), Temperatur control unit based on the use of heat transfer oil Manufactur: GWK Model: teco tt 60.1.09.000 year of construction: 2020 Serial-N°: 40000109106 can be used in all Types of industrie -Asphalt mixing Plants- The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Kodpfx Asllwizebcelp Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. Ksdpfxowt A Eie Abcjlp • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Year of construction: 2015, condition: reconditioned (used), New price 2015- 15200€ GWK cooling tower Proven completely overhauled by GWK Klodpfx Asdxlntobcsp DGUV certificate available

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater Kodpfxom Dtm Aj Abcolp - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 185 kg, The oil temperature control unit is new and available immediately Medium: Oil Temperature : 300 degrees Indirect cooling : I2 Klsdpsrazg Ujfx Abcsp Heating capacity : 12 KW Weight : 123 KG

Condition: new, functionality: fully functional, Year of construction: 2024, The temperature control unit from the company is available and has not been put into operation. Medium: Water Kledpfjw Rb Hfjx Abcep Heating capacity: 27 kW Cooling capacity: 175 kW VA: Mould drain (vacuum) FM: Flow monitoring MKVI: Touch screen

Condition: used, Year of construction: 2015, functionality: fully functional, The 3 temperature control units from BoeTherm are for sale. They have been inspected in my workshop and are fully functional. The price is per unit! Kodpfxjxpt Rre Abcelp Medium: Water Heating capacity: 9 kW Pump output: 84 L/min Pump pressure: 2.8 bar Tank volume: 6 liters Dimensions: L: 650 mm W: 265 mm H: 650 mm Weight: 45 kg

Condition: excellent (used), Year of construction: 2017, Stainless steel jacketed tank Mixer with variable speed control Temperature tank sensor Capacity 300 ltr Mobile on castors Kljdjx Dnk Njpfx Abcop

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Klodeyhc Raepfx Abcjp Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, mixing tank, control system. 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more.'

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 03, overall weight: 350 kg, total width: 130 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input frequency: 50 Hz, Equipment: documentation/manual, We have 17 sets of NF42 4/54,2/130，2/84,2/66， Year 1987-2005 With double iron roller With rubber prester With 16-20 Harness Frame With binder thread motion With 6 Contact Rail and Stop Motion Device With 2 weft thread transport Kledju A Ir Ejpfx Abcjp State: Clean up and Clean, after repair testing

Year of construction: 2025, condition: new, Direkt vom Hersteller verkauft, sehr gute qualität, alle komponente aus Europa, Temp. Kontrol Unit (Thermoregulator), Heat Control Device Technische Daten: Marke: Churchill ISI-TAN Model: CH20 Heizleistung: 19 kW (Öl oder Wasser) Kühlen: 90C/50 kW Arbeitsbereich: 0-90C (Wasser), 0-150C (Öl) Pumpe: 60l/min (German brand) Leistungverbrauch: 19 kW Voltage: 400/50Hz, 3phases Ksdpfxjgnlpws Abcslp VAT and delivery cost is not included

Condition: excellent (used), Year of construction: 2001, Year of manufacture: 2001 Reach: 1745 mm Control: Panasonic Klsdpfoyu Ifcex Abcsp Payload: 6 kg

Condition: excellent (used), Turntable length: 3330 mm Max. load capacity: 500 kg Rotational speed: 16 rpm PANASONIC robot – serial number A0225 M Kedpfjw U Agbex Abcjlp Max. payload: 6 kg Reach: 1374 mm Control unit: YA-1TCR61E00 Safety cabin with ALBANY ASSA ABLOY doors Dimensions: 9400 × 2600 × 2900 mm Weight: approx. 5000 kg

Condition: new, For sale: Professional Proval PA125DA pneumatic actuator with complete control equipment. The set includes a pneumatic actuator, IMI Herion solenoid valve, and J J limit switch box in ATEX version. The device comes from warehouse stock, in brand new and unused condition. Technical Data: Kodpfjyvabxox Abcelp Manufacturer: Proval Model: PA125DA Type: Double-acting pneumatic actuator Rotation angle: 90 degrees Operating pressure: 2 to 8 bar Connection: G 1/4 Temperature range: minus 20 to plus 80 °C Standard: ISO F07, F10 Equipment: IMI Herion solenoid valve 230V 50Hz J J ATEX IP67 limit switch box Complete set ready for installation Condition: New, warehouse stock Possible minor storage marks Price per piece

Condition: new, For sale: Bernard Controls DEUFRA SQ10 electric valve actuator The device is brand new, unused, from warehouse stock. Ideal for industrial applications, process installations, automation, and valve or damper control. Technical data: Manufacturer: Bernard Controls DEUFRA Model: SQ10 Power supply: 230 V Phase: 1-phase Power: 0.02 kW Frequency: 50 Hz Current: 0.5 A Torque: 100 Nm Speed: approx. 0.43 rpm Industrial-grade design Condition: New, unused, warehouse stock No signs of use Fully functional Additional information: Ksdpfxoyu U Aze Abcolp The price is for one unit

Condition: good (used), Year of construction: 1985, Heavy duty lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1985 Main technical data: Kledpfexygdyjx Abcop • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over slide: 970 mm • Height of centers: 625 mm • Distance between centers: 10,000 mm • Max. weight of the workpiece: 16 t • Speed range of the main spindle: 0.8 – 160 rpm • Main drive motor: 75 kW • Longitudinal feed: 0.4 – 480 mm/min • Transversal feed: 0.2 – 240 mm/min • Intermediate slide feed: 0.15 – 180 mm/min • Intermediate slide travel: 500 mm • Cross slide travel: 520 mm • Tool holder travel: 175 mm • Machine weight: approx. 29,000 kg Accessories: - 4-jaw face plate - 5 steady rests The lathe is in good condition. For more details please contact us.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0/200/06/3164, overall weight: 6,500 kg, total length: 12,600 mm, workpiece weight (max.): 5,500 kg, Softforming edge banding machine , in operation, used condition, year of manufacture 2003, Kledevx Ep Nepfx Abcep

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 140 mm, spindle bore: 45 mm, center width: 500 mm, Cycle lathe Manufacturer: Kern Model: CD 282 Year of manufacture: 2006 Technical Data Make: Kern Model: CD 282 Year: 2006 Control: Heidenhain Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 140 mm Spindle bore: 45 mm Speed range: 1–5000 rpm Drive power: 11.5 kW Dimensions: L 2.20 x W 1.60 x H 1.20 m Weight: approx. 1.6 t Accessories - Heidenhain control digital display - Clean Mist extraction unit, model CM 1400/2, year 2018 - Large range of accessories as per photos Klodpfx Ajyvugdobcop - 1 piece steady rest - 1 faceplate, ø500 mm - 4 Multifix holders, size C All information is supplied without liability. A live demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Kodpfoyvy Rnox Abcelp Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Price between €300-1000 each. Kedpfxsucwzaj Abcolp Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, We would be happy to advise you! Ksdsrlm Rvjpfx Abcolp Here we offer from our own inventory: 10x Filter Fan Unit (FFU) controllers together with digital control units. New price: €1,000 each. We also offer a cleanroom setup according to your requirements. See pictures for an example. The room elements are each 2.05 meters x 3.2 meters. The pictures are of a room we built for a Dutch customer. New cleanrooms have a guide price of €500 per square meter of floor space with a height of 2,500 mm and glazing. Example: 4x4 meters 4x4 = 16 * €500 = €8,000