Used drying systems for sale (19)

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 111302, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Ice condenser volume: 100 l Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Ice condenser temperature: −75 °C MACHINE DETAILS Platform dimensions: 350 × 450 mm Platform area: 0.48 m² Platform spacing: 111 mm Refrigerant: Isceon 89 Heat transfer fluid: Syltherm HF Electrical equipment: 400 Volt, 3 phases, 50 Hz Dimensions & Weight Ibolozrfa Dehccqnja Space requirement for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space requirement for additional component: 1,800 × 600 × 2,000 mm Weight: approx. 1,500 kg

Year of construction: 2012, condition: used, Used Pharmix model HHR1200 stainless steel (AISI 316L) double cone jacketed vacuum dryer blender. Approximately 1200 litre total capacity. Internal rated -1/0 bar design pressure at 60°C. Has external stainless steel (AISI 304) jacket 260 litre capacity rated 3 bar design pressure at 70°C. Includes internal stainless steel vacuum pipe. Cone has intlet with bolted lid and bottom discharge with manual valve. Driven through gearbox by 2.2 kW, 400 V, 1420 rpm, 50 Hz el. motor, rotations of dryer are 2.2 rpm. Gearbox is Ex II 2D c 125°C rated / motor II2 D Ex tD A21 T 120°C. Mounted on mild steel support stands. Overall dimensions are 4015 mm (length) x 3975 mm (width) x 3300 mm (height - includes stairs), weight 3430 kg. Unit is dismantled - attached photos are from installation. Ibjlhelc Dv Uoccqnea

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter Ibslhjlc Dwveccqnsa 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: used, functionality: unexamined, machine/vehicle number: nicht mehr vorhanden, overall weight: 200 kg, This is a laboratory spray tower with a water evaporation rate of 3 to 5 kg/h, using a two-component nozzle. It will be sold to the highest bidder. Ielhcezupiuecqnoba

Condition: good (used), Year of construction: 1994, space requirement width: 5,00,750 mm, Coating pan GLATT Type Coater GC 750/500 from 1994 with interchangeable drum, explosion-proof design. Process Equipment: Glatt Coater GC 750 (equipment only used for test runs) Perforated drum with D = 500mm drum and 750 mm drum, with: Inlet and outlet air ducts for both drums Capacity of 750 drum: 50 – 75 kg/batch Capacity of 500mm drum: 15-45 kg/batch Discharging must be done manually Spraying arm with nozzle adapter Spraying system with 1 Schlick nozzle Control cabinet (pneumatic/electrical) with Siemens PLC S5 Ibelhccqszmvqionoa Air handling unit 7AIR including: With inlet air fan F7 and H12 filtration Preheating Dehumidification Heating Deduster HERDING Outlet air fan WIP nozzle inside drum and external nozzle

Condition: good (used), Year of construction: 2000, 2 used 11 m2 (22.70 sq ft) Pink Thermosysteme vacuum shelf dryer, model 650-650-120-5, hastelloy C22 product contact surfaces, with (5) 650mm x 650 mm shelves rated 3 bar, 120mm shelf spacing, 700mm wide x 775mm deep x 700mm high internal chamber dimensions, chamber rated -1/+1 bar at 95 c, WO#60070, fab# 20004677, built 2000. sku-3470-21 Ijlhsiqx N Heccqneba

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The desalinated water/permeate is then led to consumption via a 1000 litre reservoir. The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Under normal operating conditions the RO membranes have a long lifetime. But even with a Ibelhccezl E Dijqnja good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a slow reduction of the permeate capacity.

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind Iolhccqozl E Afensba scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 3,000 mm, space requirement length: 3,000 mm, space requirement height: 18,000 mm, Solex cooler conditioner dryer Ibelhccjxw D Nhsqnja Height: 18 meters, entirely made of stainless steel 316, designed for cooling, drying, and conditioning granules of food, fertilizer, or plastics. Capacity: 18 tons per hour.

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Ibslhcjx R D Efocqnsa Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 1,750 kg, total width: 1,120 mm, total length: 3,750 mm, number of chambers: 1, Equipment: documentation/manual, For sale: a high-performance fluid bed dryer from the renowned manufacturer Buhler, model OTWG-280. This is a horizontally constructed machine designed for the continuous thermal processing of bulk and granular materials. With its sectional design, the machine can function both as a dryer and a cooler, making it an extremely versatile element of any production line. The machine utilizes the principle of fluidization. The process involves blowing hot (or cold) air through a perforated base holding the raw material. The air lifts the material particles, forming a so-called "fluidized bed." In this state, each particle is surrounded on all sides by the heating/cooling medium, providing: Ijlhccjy D Iiujqnoba - Instant heat exchange (significantly faster than drum dryers) - Uniform drying with no risk of localized overheating - Gentle product handling – minimal risk of mechanical damage to raw materials We have two OTWG 280 units and one OTWG 90 unit available. The price for the OTWG 280 is listed in the advertisement. OTWG 90 price: 40,000 EUR.

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Ibjlhceuk Ehxjcqnsa

Condition: used, Year of construction: 1989, Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer : Glatt Model: WSG-C200 Year: 1989 Iolhcjx R An Socqnjba Previous use: pharmaceutical Product pan capacity: 700 litres. Product capacity: 200 – 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Sold with 2 pans and protective pockets Trolley reverser: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Condition: used, Year of construction: 1986, Manufacturer: Guedu Year : 1986 Type : Reactor dryer Engine : hydraulic Reactor volume: 280 L Shell circuit : Ielhex Rz Iqoccqneba Tank: 14.6 L / 0.9 m2 Bottom: 13.75 L / 0.55 m2 Corrosion allowance: 1 mm Test pressure (half shell): 12 bar Working pressure (half shell): 6 bar steam Test pressure (tank): 6 bar Working pressure (vessel): 3.99 bar gas and 10 torr vacuum Operating temperature: - 20°C + 160°C Welding coefficient : 0,7

Condition: used, - Material: Stainless steel Ibelsx Rz Nbohccqnea - Pneumatic version / ADF - EX - 2 truncated 400L tanks on trolley (per dryer) model WSG120 / D.1200 / 900 X PF.500 - 1 tank turner common to both dryers - Control cabinet - Safety by 2 explosion membranes coupled to nitrogen gas cylinder

Condition: used, Manufacturer: Usifroid Usifroid Reference : SMJ 100 FPI Type : freeze dryer Number of trays : 2 Surface area per tray : 100 cm x 50 cm 2 air compressors 1 refrigeration unit : R22 and 502 1 circulation pump 1 heating system Iolex R Av Ajhccqnsba Missing parts : Hydraulic unit Vacuum pump

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Ibjlheygndpsccqnoa Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: used, // Sold as is or reconditioned // Vacuum paddle dryer mixer Ielhcex Rz Spscqnoba Used for products such as powders/powdery substances. 316 stainless steel Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Loading via 400 diameter Discharge 350 diameter with guillotine valves ADF 15 kW motor Self-cleaning filter

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM paddle dryer (pharmaceutical dryer) total capacity 3100 liters, working volume 2380 liters, product contact stainless steel 1.4435, interior surfaces mirror polished, operating temperature -20/+165°C, operating pressure -1/+6 bar, jacket heating by means of half-pipe coil, vapour filter, mounted on a steel frame. Further information on request, thank you. Ibslhccor Nclaeqnea