Used Test Tool for sale (47,014)

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Fedpfx Ajzizl Roatopl Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: Fedpezizmzsfx Aatjpl - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Max load: 100 kg Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA Fpjdpfxezikb Ij Aatol 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: used, RMS Control and Measurement Technology – Vibration Test System with Accessories For sale is a high-quality set from RMS Control and Measurement Technology, including a Rietschle fan, ideal for vibration testing, resonance tests, and material examinations. Included devices: RMS CONTROL AND MEASUREMENT TECHNOLOGY – Vibration Exciter Type SW 6011 No. 2230 30 V – 200 A 13 mm / 1.2 m/sec / 100 g Mounting Frame Type SWT 6211/1 No. 6074 – stable fixture for test specimens Power Amplifier Type TGE 10‑1/7 – for optimal operation of the vibration exciter Rietschle SKG 410‑2.01 Fan – high-performance vacuum/pressure blower Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) Fpodpozikdcefx Aatol If you have further questions, we would be happy to clarify them by phone.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. Fpsdpfx Aszil T Soatjl High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: used, Zwick Type: Z30 Fedpfx Aszil Uceatopl Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Fsdpfx Aaozil Upjtjpl Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Fpsdpfxjzimgao Aatsl Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Fjdpfx Aajzimgtotopl Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 155 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,20 x 2,30 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant Fpsdpjzip Hisfx Aatjl

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity: 5 available Manufacturer: Stahl Prüftechnik Fsdpozh A D Esfx Aatopl Type: FR-110.01A Function: Testing device for functional and process monitoring in industrial applications Power supply: 230 V AC Display: LED / Digital display Housing: Metal Application: Quality assurance, leak testing, process control

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Fpodpezh Htwjfx Aatsl Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Fpjdpfx Aajzh Ht Retel Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar Fpedpfxoza Dv Ij Aatol R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Grinding machine, angle grinder, lathe steel grinder, thread drill grinder, milling grinder, surface grinder, drill grinder, bench grinder Fpjdpfx Asfnxw Uoatjl -Manufacturer: Strohm -Handover: as is as seen -Protective window: damaged on one side -Binding bench: missing -Motor: AEG 0.22/0.3 kW -Speed: 680/1400 rpm -Coolant device: switchable, adjustable -Dimensions: 590/490/H1370 mm -Weight: 222 kg

Condition: excellent (used), Tool setting device (24310) For SK 50 Fpjdpfshc I Uvjx Aatjl

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with a 3-axis Elesta-Visulesta digital display. Fixed angular table, SK 40 spindle mount. In very good, operational condition, from an institute. The machine can be demonstrated under power by arrangement. Fpsdpfx Ajg Nw Rzjatsl

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine Fpedpogwdpmofx Aatsl -Tool: for press brake, 12 pieces -Prisms: 25 ° x 10 mm -Drawing: in the photos -Lengths: see parts list in the photos -Dimensions total: 30/79/2917 mm -Weight: 47 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, 6 pieces -Tool: for closing folds -Drawing: in the photos -Dimension: 20 x 70 x 495 mm -Price / fee: complete -Length total: 2970 mm -Total weight: 31.3 kg Fpedpfxjgwdpxe Aatjl

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool Fpjdpsgxgm Aofx Aatel -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool Fpsdpfx Aegxgm Heatel -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Condition: used, Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm Fpedpsgl Dutsfx Aatel -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Fpodpfxsr D T U Ds Aatsl In very good condition

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Fjdpfx Aoizw E Ajatjpl Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Buchdruck Schließzeuge Regletten / Letter Press closing tools - rulesSchließzeuge in Breiten 9-12-18-25mm und Längen 5-7,5-10-12-15-18-20-25-30 Keilmutter Fsdpfx Aaorffnfetspl Keilback SchraubeRegletten, Blei Schlüssel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test