Tool cutter

Deckel FP3

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Hnsdpjv R E Rdjfx Aiyjl Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer Hedpjxuh Rdefx Aiyenl - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: used, machine/vehicle number: 2055, up to 2000 rpm, T-slot table size 1000 mm x 400 mm, with 3-axis digital readout HEIDENHAIN Hjdey Sqi Hspfx Aiysnl

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty Hnodpfx Aspn Rgvjiyjl geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Hnjdpfjtdcfhox Aiysl Technical data: x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Hnodjtdnb Ejpfx Aiyel drawing thread M 16 - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric Hnsdpfeh Rv U Ejx Aiyjl - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Year of construction: 1980, condition: ready for operation (used), Max. rotational speed: 2500/min, feed rate: 5-500mm/min. Hnodpefdzzyjfx Aiyol

Condition: ready for operation (used), Tool Milling Machine / DECKEL FP 2 with 3-Axis Digital Readout - Heidenhain ND 780 - Machine in well-maintained original condition - Travel X/Y/Z 450x230x400mm - 3-axis digital readout Heidenhain - Automatic feeds / rapid traverses on all three axes - Spindle speed range 40-2000 rpm - Universal tilting, swiveling, and rotating table - Horizontal / vertical milling setup with sliding head - Tool holder ISO 40 - Coolant system - Various tool holders & collets - Documentation Hedey R Emqepfx Aiyjnl Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors / input mistakes reserved

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout (Heidenhain) and Infinitely Variable Feed, Original Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine no. 2201-5527 >> Swivel-tilt-rotary table >> Speed range: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be displaced 200 mm on spindle carrier >> Vertical and horizontal quill, SK40, extendable >> Pull stud system: M16 >> Weight: approx. 1,500 kg Accessories and Equipment: Hnedjy Eqkzspfx Aiyjl >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central lubrication About the machine: Offered here is a universal milling machine Deckel FP3 in very good original condition. The machine shows minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable in all three axes, and each axis features rapid traverse. A significant advantage is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter dimensions and the machine will automatically move to defined positions. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site. The machine is available immediately.

Condition: used, Motor output 3 kW total power requirement 3 kw Hnodpfx Asv Nq Skjiysl Weight 1.400 kg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Hjdpfjy D Tl Iox Aiyenl Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: reconditioned (used), functionality: fully functional, Equipment: documentation/manual, Dear Sir or Madam, Hjdpfx Ajq H Eabsiyonl We hereby offer a Deckel FP3 milling machine. The machine is undergoing comprehensive partial refurbishment in our workshop and is therefore in excellent condition. We are happy to retrofit safety devices or additional equipment according to your requirements. We look forward to your inquiry! Delivery time: on request Dimensions: 2.00x1.60x1.90 m (LxWxH) Weight: approx. 1,500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Table clamping surface: 800x420 mm Speed range: 40-2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500 mm/min Rapid traverse: approx. 1,500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master craft business specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - We can perform a complete or partial overhaul of your selected machine upon request - You are free to choose the paint color for your selected machine - On request, you can order additional accessories such as tools, etc., directly - On request, we can also install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation at your location

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays Hsdpfx Aju U E T Isiyenl *

Condition: used, control Dialog 4 x-travel 400 mm y-travel 315 mm z-travel 400 mm spindle tunring speed 3.150 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Hnodpfxeyyqp Aj Aiyol if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.