Used Textile Cleaning for sale (6,841)

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. Fsdpfx Adjxcnxderjpk The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Year of construction: 2019, condition: like new (used), ASYS ACS 02 * Year of manufacture: 2019 * Serial number: 084939 * Machine length: 1,060 mm * Supply voltage: 400 VAC / 50 Hz * Power connection: 3-phase * Rated current: 2.7 A * Connected power: 1.5 kW Fodpszqcwwsfx Adrspk * Fusing: 16 A * Operating pressure: 6 bar * Condition: Used, operational

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3141, Technical characteristics: Core Specifications Attribute Value Ultrasonic Technology High-frequency cavitation system Tank Capacity Approx. 230 liters Cleaning Stages Multi-stage (pre-wash, ultrasonic, rinse, dry) Heating System Integrated, adjustable up to 60–80°C Ultrasonic Frequency 25 kHz Construction Material Stainless steel AISI 304 or higher Control System Programmable with safety interlocks Automation Options Basket lift, agitation, filtration, oil separation Power Supply 400V / 50Hz Noise Level Approx. 70–75 dB(A) Features & Capabilities Fedpfx Asxx Swvodrepk - Multi-phase cleaning: Includes vapor pre-treatment, ultrasonic washing, cold/hot rinsing, and hot-air drying. - Oil separation system: Utilizes skimming and decanting to maintain cleaner baths. - Modular design: Configurable with additional stations for drying, corrosion protection, or deionized rinsing. - Safety & Ergonomics: Enclosed chambers with polycarbonate windows and sensor-based safety systems. - Continuous-duty rated: Designed for high-throughput industrial applications. Machine status: WORKING

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 52915, Technical characteristics: Fodpexwmkzefx Adrjpk # Payload Capacity: Basket size 530 x 320 x 233 mm # Tank capacity: 420L # Type of detergents: modified alcohol solvents # Washing chamber loading capacity: Max. 70 KG # Ultrasonic equipment: 4000W, 25kHz # Mechanical weight: 6000 Kg Electrical Equipment # Operating voltage: 400Vx3 # Connection power: 31 kW / rated current 63A Dimensions # Machine Dimensions (L×W×H): 2800 × 1750 × 2300 mm Equipment consists of: # Main machine Hosel, manual loading/unloading with special stainless steel support Machine status: WORKING

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 170 x 132 x 113 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 1924 - Drive system: Conventional - Rotary table: Yes - Number of turbines [pcs]: 1 - Max. workpiece length [mm]: 600 - Max. workpiece height [mm]: 265 - Transport dimensions: 1700mm x 1320mm x 1130mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fpodpfezkqx Asx Adrok Lukas van Rossum

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles Fpjdpfx Adezicl Eerok 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone. Fpsdpfezixy Sox Adrjk

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) Fodozl Slyspfx Adrspk - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Condition: used, Year of construction: 2004, Batch size (max., approx.) 1.340 x 480 x 480 mm charge load ca. 200 kg output rate ca. 3.000 kg/h cycle time ca. 4 min Loading height 460 mm heating capacity 150 kW heating time ca. 3 Std. required air pressure 6 bar Fresh water 3 bar Number of working hours ca. 77.034 h total power requirement ca. 192 kW weight of the machine ca. 11 t Fpjdszhxm Ajpfx Adrok dimensions of the machine ca. 3,60 x 10,10 x 3,25 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: new, working width: 610 mm, area performance: 2,745 m²/h, overall weight: 208 kg, warranty duration: 12 months, water tank capacity: 55 l, I-DRIVE 65 PROFESSIONAL FLOOR SCRUBBERS - 2745m²/h TECHNICAL DATA: Model: I-Drive 65 Type: Compact Scrubber Series: Professional Condition: NEW Wheel Drive: Yes Battery Charger Included: Yes Power Supply: Battery Battery Type: 6 i-power 14 Batteries Number of Brushes Included (pcs): 2 Brush Working Width (mm): 610 Squeegee Working Width (mm): 790 Water Tank: Clean / Dirty (l): 55 / 55 Theoretical Area Performance (m²/h): 2745 Weight (kg): 208 I-MOP LITE PROFESSIONAL FLOOR SCRUBBERS FLOORS - 1400m²/h TECHNICAL DATA: Model: I-Mop Lite Type: Compact scrubber Series: Professional Condition: NEW Charger included: Yes Power supply: battery Battery type: i-power 12: 18 V, 12 Ah Number of brushes included (pcs): 2 Brush working width (mm): 370 Squeegee working width (mm): 370 Water tank: clean / dirty (l): 3 / 3 Theoretical surface efficiency (m²/h): 1400 Weight (kg): 16.8 WHY CHOOSE THE I-DRIVE 65 + I-MOP LITE SCRUBBERS Fpsdszkr Dtspfx Adrjk The combination of the I-Drive 65 and the I-Mop Lite is a concept developed by I-Team. A 2-in-1 solution – an efficient ride-on scrubber for large areas with the ability to immediately use the compact I-Mop for thorough cleaning in areas inaccessible with a traditional machine. This allows a single operator to thoroughly clean the entire facility without having to change equipment. One machine for multiple surfaces – the I-Drive 65 effectively cleans large, open spaces such as halls, warehouses, shopping malls, and airports. When narrow passages, corners, or under furniture need cleaning, the operator simply removes the I-Mop Lite from the rear handle and continues working without changing positions. ADVANTAGES OF THE I-DRIVE 65 Easy to use - Clear icons and a simple control panel. One-button activation of the brushes and suction system. Automatic fill system - Stops at the fill line, preventing water from splashing or dripping into the battery compartments. Hidden safe - For storing a wallet or phone. Adjustable foot pedal - Easily adjust settings to suit operator preferences. Clear front view while driving. Easy squeegee removal with the push of a button. The ramp can be quickly assembled for loading and unloading. I-MOP LITE BENEFITS Easy to use - Only 4 buttons, no training required. Super lightweight - Improved ergonomics and increased job satisfaction for cleaners. Microban® antibacterial tank - Prevents bacterial growth for long-lasting hygiene and protection. No trip hazard - Operates on portable lithium batteries instead of a long cord. Brushless motor - Low noise and longer runtime. Efficient cleaning of all hard floor surfaces - 500 RPM high-speed brushes.

Condition: used, Year of construction: 1986, year of last overhaul: 2004, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST TEXTILE FABRIC STENTER – MONTFORTS MONTEX 12 G/K For sale: Montforts Montex 12 G/K textile fabric stenter line, well-equipped and suitable for drying, finishing, coating, and fabric straightening applications. Machine details Make: Montforts Model: Montex 12 G/K Year of manufacture: 1986 Major overhaul: 2004, including replacement with economical type burners. After few years was preserved and stored. Fpodpfjy A S Thox Adrjk Refurbished: 2008, then preserved Working width: 220 cm Drying chambers: 6 Heating: Liquid gas and natural gas Fabric conveying system: Horizontal chain, pin and clip Accessories and additional equipment Küsters foulard Isotex coating unit, model SR Mahlo straightener, model RFMC-74 AN Selvage cutting units 2 cooling cylinders Chemical station with tanks: 1300 L, 1100 L, 2 x 500 L All tanks fitted with mixers Heat recovery system installed above the drying compartments MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: used, Year of construction: 1985, year of last overhaul: 2008, CLEARANCE SALE 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Used / Overhauled Make: Stork Model/Type: RD-IV Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Heating system: Steam Included equipment: Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Suitable for textile rotary printing operations requiring reliable multi-color production. MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE Fsdpey A S Ryefx Adropk For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Year of construction: 2010, condition: used, Article: Parts cleaning system Manufacturer: EVT Eiberger Verfahrenstechnik GmbH Fodpfx Adjzickzjropk Type: LIMPIO - PER Yob: 2010 Solvent: Perchloroethylene Customizable work chamber design as a FRONTTOP loader Regenerable adsorption system Continuous distillation of the solvent Combined vacuum drying Immersion cleaning with recirculation system Rotary-swivel mechanism for the baskets Concentration limit sensor Touchscreen operation Remote diagnostic unit Spray system Second storage tank for solvent Cartridge filter unit with filter drying Feeding system Filling and emptying valves Connection to batch distillation unit Maintenance exhaust system Self-sufficient compressed air supply Plexiglas enclosure Connection to roller feeding system Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Epson SureColor SC-F2100” production system. Item for sale: 1x Epson SureColor SC-F2100 We can easily configure the machine to your specifications. Feel free to contact us! Fedpjzh Dcvsfx Adrspk Counter readings: Total: 0 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: excellent (used), Stratasys Objet Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the creation of prototypes from three materials, as well as simulating overmolding or equipping build plates with selected models. Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, Fpsdpfezh Dqyox Adrek smooth surfaces, and thin walls. Model materials: Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Tooling and fixtures Architectural models Medical models Injection molding molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the full model size (only for rigid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece -Number: 2 pieces -Dimensions: 595/380/H660 mm Fpedpfx Adjd Skkyorek -Weight: 38 kg

Condition: used, Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete Fpodpfsdtm Uksx Adrek -packed on: EURO pallet -Weight: 252 kg

Condition: used, Control for cleaning system -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg Fpedpfx Adob Uhtwsrsk

Condition: good (used), Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm Fpedpfx Ascnha Ajdrok -Weight: 8 kg

Condition: good (used), trolley -Simple bucket -Flat press Fjdpfx Adjb A H U Ssropk -2x shelves for microfiber mops

Condition: good (used), Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin Fpedpfx Ador Im R Ajrek -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Fodpfx Aszqtkzodropk Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: reconditioned (used), Cleaning agent: hydrocarbon or modified alcohol. Fpjdpfx Aoznhgrsdrek

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Fpodpfx Aexpximedrjk Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Fpsdpfewzyh Rsx Adrsk Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07