Used Textile Cleaning for sale (6,569)

Condition: used, Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center Nwsdpfx Asdtm Ukoc Ajd -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg

Condition: good (used), Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece Nwsdpfxscnha Ao Ac Ajd -Dimensions: 310/370/H740 mm -Weight: 8 kg

Condition: used, Year of construction: 2020, sweeping width 942 mm working width Bodendüse: 700 mm tank Reinigung: 79 l tank Schmutzwasser: 83 l weight of the machine ca. 145 kg dimensions of the machine ca. 1,32 x 0,7 x 1,1 m - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant Njdpjgvqzgsfx Ac Aswd - Extraction: 2 levels with fans and stainless steel shaft

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h Nwsdpfxsg Ti Ihj Ac Aed max. 5232 m²/h Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Nwsdpsvvuzcofx Ac Aod Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning Nwedpetwmxyofx Ac Asd - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine · Servo-controlled saw forward feed with programmable cutting parameters · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine Nsdpfx Aeyllvyjc Aewd The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Contact us for a quote, full details and inspection arrangements. Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Sturtz fully automatic welding (2 machines x 4 head) and double head corner cleaning line - 1 x welder VSM40/26 - 1 x welder VSM30/26 - 1 x handling with verticat transport system - 1 x tilting table - 1 x 2 head corner cleaner with drilling head's - 1 x outfeed table adjusted for Rehau Brillant/Euro70, Synego and Geneo Nwedpfxsvkdubo Ac Asd the line is still in production, can be inspected in working conditions fully functional, very good conditions

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time. Nwodpfxonl Ekrj Ac Ajd

Condition: good (used), Year of construction: 2016, Conveyor dryer for DTG : Fahrenheit Electric 6160 - Chiossi & Cavazzuti Hot air dryer in good condition, for all kind of digital/screen printing/transfer applications Year 2016 Delivery not included, we can ship everywhere, ask for a quote Caractéristics : MAX POWER: 49 KW APPLICATION FIELD : DTG, screen printing, transfer printing DRYING by HOT AIR circulated (very high power) Nedpfxexzq Tbs Ac Aowd DRYING AREA: 6000 x 1600 mm PRODUCTION MAX : 600 pieces/h

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet Nwedpfx Aecx R D Hsc Asd chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg Nwodpfx Acehkztwj Asd - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Nwodpsdqzhhjfx Ac Ajd Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Nwedpfx Acecdy I Tj Aed Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. Nwsdpfx Aocnw T Ioc Ajd All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Njdjhkzt Nepfx Ac Ajwd Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Low noise emission Longer filter life Easy emptying Supplied ready to plug in With rotary valve Nsdpfx Ashkzu Aec Aswd Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Nwjdpfx Aecdy I Rjc Aod Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg Nedpfx Acsh D If Ho Aewd

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Nwodpshkzttofx Ac Ajd Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Nsdpfx Ajcdr E Ajc Aowd Subject to prior sale

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Exhibition piece (no operating hours yet - new) Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Nsdpfx Acobuvbre Aswd Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Nwjdpfx Ajcdy Ndoc Aed Location: From stock Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Nwedpfx Acocnw U Dj Asd Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan Nwjdpjcqy I Ssfx Ac Ajd approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg