Used Thermoform for sale (159)

Condition: as good as new (ex-display), machine/vehicle number: 1966190, Heating table HT3110 For temperature control of thermoplastic materials such as mineral composites, acrylic, and others, to reach the required processing temperatures. Fpodj T Sv Sspfx Aatel Torsionally rigid base frame made of welded steel profiles. Movable on four rollers. Upper folding frame rotatably mounted at the rear in a robust hinge bearing. Two black anodized aluminum heating plates, maximum operating temperature 180°C. Temperature control via electronic controller in a separate control cabinet located in the base of the table. Actuation of the pivoting motion via pneumatically operated cylinders mounted on the side. Four adjustment screws on the side for adjusting the material thickness.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm Fjdpfx Aajfg E H Ujtepl turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed Fpsdpfjfg E H Ssx Aatjl * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulics PN: 150 bar Pn: 16,5 kW P heating: 8 kW 400 V Single STW 150/1-3-10-K  Temperature control unit  3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete factory closure, Fedpfx Aasg H I Nxstepl large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), SS outfeed conveyor belt for Multihead weigher This Stainless Steel conveyor belt is specially designed to transport carefully the portions from the Multihead Weigher to the next machine like a thermoformer or traysealer. The conveyor belt can easily be connected with a traysealer, thermoformer or another machine to drop the portions from the Multihead Weigher to the next machine 1 by 1. Fpjdpjix Ngqefx Aatol The conveyor belt is equipped with a cover and has an option to connect a cooling-unit to keep the product cool. Material: Stainless Steel Belt width: 305 mm Chamber length: 200 mm Total belt width: 4.650 mm Input height: 1.880 mm (adjustable) Output height: 1.7650 mm (adjustable) Machine Dimensions (LxWxH): 4.600x1.500x2.450 mm

Condition: good (used), Year of construction: 2013, Cabinplant MHW 40-24 Multihead Weigher and Cabinplant Depositor/Distributor Machine functions: Fsdpfx Aaewyu Tretjpl - Product is fed to infeed system, consisting of an elevator; - The elevator is controlled by the infeed sensor of the multihead weigher; - The multihead weighing machine discharges weighed out portions to Distributor / Depositor; - Distributor / Depositor distributes portions, orientates the product and dumps finished portions into a thermoforming machine or traysealer; This line consist of the following equipment:  - SS Stair; - Infeed conveyor belt; - SS Platform; - Cabinplant MHW 40-24 Multihead Weigher; - Cabinplant Depositor / Distributor; Cabinplant MHW 40-24 Multihead Weigher Manufacturer: Cabinplant Model: MHW 40-24 Year: 2013 Capacity: 150-500 gram Weighings/min.: Up to 120 Pan Size: 4 liter Number of pans: 24 Machine Dimensions LxWxH: 2.200x2.125x2.500 mm Machine Weight: 1.100 kg. Multihead Weigher is fully checked and serviced by Cabinplant Cabinplant Depositor / Distributor Manufacturer: Cabinplant Model: Sausage Depositor Year: 2014 Capacity: 150-500 gram Weighings/min.: Up to 120 Filling Capacity: 2x5 movable pitch

Year of construction: 2018, condition: good (used), Multivac L310 Conveyor Belt Labeller The conveyor belt labellers of the L 310 series offer the highest level of flexibility and precision in the labelling of a wide range of packs, such as pots, cans, folding cartons, tubular pouches, thermoformed packs or trays. They have a modular design and, thanks to a wide range of options for labelling, printing and inspection, they can be precisely adapted to even the most complex tasks. With a transport conveyor speed of up to 90 m/min and a labelling speed of up to 120 m/min, they can also meet the highest output requirements. The L 310 conveyor belt labeller is also available in a hygienic design for use in particularly hygiene-sensitive areas, such as Lifescience and healthcare products. Benefits:  Wide range of options available to perform a variety of tasks, including printing and inspection Maximum labelling speed and accuracy through the use of servo technology Easy operation thanks to the graphic HMI 2.0 or MC 08/MC 10 user interface Reduced downtime thanks to simple and fast label roll changes Transport belt changes without tools Consistent hygiene design Manufacturer:Multivac Model: L 310 Year:2018 Fpjdpfx Aaeyffnpjtol Capacity:Up to 120 packs/min. Labelling Width:Up to 500 mm Labelling:Bottom and Top Belt Width:290 mm Machine Dimensions LxWxH:1.750x1.050x1.900 mm Machine Weight:200 kg.

Condition: excellent (used), functionality: fully functional, Box forming Inner bag thermoforming Pasta filling Top filling Sealing Fodpou Ivdtsfx Aatjpl

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Tria Model: 70 kW Condition: ready for operation (used) Fpjdpfx Aswnx H Seatsl RIA S.p.A. Ideal for medium-to-high throughput applications. Designed for efficient inline or standalone size reduction of sheet, cups, profiles, and other plastic waste. Construction: Built-heavy-duty, suitable for inline integration under thermoformers or as standalone units.