Used Thermoform for sale (172)

Year of construction: 2004, condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Todpfjl Ax Tvex Ac Nef

Condition: ready for operation (used), Capacity: 25 strokes/min, total capacity: 36000 cups/min, filling volume: butter/margarine (hotel portions): 10g, whipped products: 5g, mold dimensions X/Y/Z: 40mm/50mm/20mm. Dimensions X/Y/Z: approx. 5000mm/1500mm/1800mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible. Tjdpfx Asw Axfdoc Nsf

Year of construction: 2017, condition: ready for operation (used), Max. Output: 12 cycles/min, film widths: 320/360/420/460/520mm, take-off lengths: 200 - 420mm. Max. Drawing depth: 190mm, top film: max. 300µm, compressed air: min. 6 bar. Including two format sets (round cups and square cups), as used for dips for chicken nuggets or ready-made salads. Outer dimensions X/Y/Z: approx. 6200/1200/2200mm, weight: approx. 2800kg incl. accessories. On-site inspection is possible. Todpery T T Rjfx Ac Nsf

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 Tjdpfx Ajwth Uiec Njf 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Todjunia Hepfx Ac Nef

Year of construction: 2021, condition: as good as new (ex-display), Colimatic Thermoformer 2021, As New Price € 29,990.00 Model - Thera 450 L Todpfsvc Ilhjx Ac Nef Only 10 hours on the machine, only used for tests. 415v / 50 hz PLC Siemens Speed up to 14 cycles/min Film from 80 my to 800 my Busch vacuum pump

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Tedpfx Acewpd Rre Nef Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Condition: used, Year of construction: 2014, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tsdpexpxfbofx Ac Nsf Tempering units for tooling Condition: Good

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Tsdpfx Aowp Ac Hsc Nof Model - Formpack F0 TMF Long Version. Serial number - F438. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: used, Year of construction: 2017, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE Todpjxpxc Tefx Ac Nef - Breyer Extruder 105mm for HDPE Cannon thermoforming press (8x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute Tjdpfx Aoxtp I Iec Njf 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Tedpsrtq I Eefx Ac Njf Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Diagram of K-50 Tjdjud Dqkepfx Ac Nof The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm.

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design Tedstndpzopfx Ac Nsf - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, film width: 422 mm, machine/vehicle number: 860, TECHNICAL DETAILS Tjdsxruc Ispfx Ac Nof Number of punches: 3 Film width: 422 mm Maximum depth: 110 mm Tool: 4-part tool (245 x 175 mm) MACHINE DETAILS Electrical data Mains voltage: 230/400 V Frequency: 50 Hz Rated current: 25 A Rated power: 16 kW EQUIPMENT Thermoforming for rigid subfilm Rolls for plastic waste Gas mixer

Condition: like new (used), Lovely Multivac R240 thermoformer. Has been packing lamb shanks in pouches for retort cooking. 560 mm wide bed 2 x 3 x 180 mm x 155 mm packs per cycle Tsdpfxeifk I Ds Ac Njf Also possible: 1 x 3 x 380 mm x 160 mm ; 2 x 1 510 mm x 180 mm

Year of construction: 2002, condition: ready for operation (used), Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible. Tjdpfexx Ud Eex Ac Nof

Condition: excellent (used), Year of construction: 2022, operating hours: 1,615 h, functionality: fully functional, Make Kiefel Model KMD 78.1 PR Year 2022 Condition Excellent Delivery date Immediately Approx hours 1615 Stations Four Max tool dimensions 780 x 600 mm Maximum forming area 760 x 580 mm Todpfx Aexwwf Noc Nof Minimum forming area 375 x 350 mm Sheet thickness range 0.2 - 1.8mm Depth of draw 150 mm +/- Max film width 810 mm Cutting Station Force 500 kN Hole Punching Station Force 300 kN Operating pressure 6 bar Max dry cycles / min 40 All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: good (used), Webomatic APS ML 7100 thermoformer The APS ML 7100 is the ideal tool for the industrial serial production of superior thermoformed packages. Even bigger dimensions enable the realisation of more flexible packaging! Our high-end solution can use all film materials common in trade up to 620 mm width with a repeat length of up to 800 mm: Depending on the product requirement and the client’s specification the APS ML 7100 can use soft film and rigid film materials, also printed top and bottom film as well as stable or reclosable packages. Equipped with two separate stainless steel lifting systems with adjustable opening width, the modular APS ML 7100 is extremely flexible in length and width: This industrial solution does not only offer an extra long filling area for the comfortable fully automatic filling process, but also a flexible cutting area for the optional punching, printing, labelling. This machine will be shipped with 1 tool: 2×1: Traysize 385×285 (variable depth with a max. of 190mm) Brand: Webomatic Tsdpfx Acsqmndcs Njf Model: APS ML 7100 Year: 2004 (completely refurbished in 2023) Top film width: 600 mm Bottom film width: 620 mm Deep drawing depth: 190 mm Cutt off length: 400 mm Vacuum Pump: Busch 100-132 / Busch WV 500 Power: 21kW / 35A / 400V /50Hz Pressed air connection: 6-12 bar Operational air pressure: 6 bar Machine Dimensions (LxWxH): 7.800x1.300x2.100 mm Machine Weight: 2.600 kg.

Condition: used, Year of construction: 2000, operating hours: 36,152 h, functionality: limited functionality, machine/vehicle number: 234-1651, film width: 540 mm, pressure: 10 bar, heating capacity: 13.9 kW (18.90 HP), working width: 540 mm, operating pressure: 10 bar, operating temperature: 570 °C, - Automatic carton feed table with 3 loading positions - Longitudinal and cross cutter with EURO punching - 5 longitudinal cutting blades included - New discharge conveyor belt - New control panel - Many spare parts available - Film rolls still available (not included) Tsdpfexxaq Dex Ac Njf The machine is operational. However, functional failures are not uncommon.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, total length: 7,100 mm, total width: 1,200 mm, total height: 2,200 mm, film width: 462 mm, machine/vehicle number: 256275, TECHNICAL DETAILS Film width: 462 mm Mould set 1: 480 x 195 mm Maximum diameter for mould set 1: 125 mm Mould set 2: 201 x 195 mm Maximum diameter for mould set 2: 125 mm Mould set 3: 190 x 150 mm Maximum diameter for mould set 3: 100 mm MACHINE DETAILS Dimensions (L x W x H): 7,100 x 1,200 x 2,200 mm EQUIPMENT Integrated vacuum pump 3 different mould sets Winder for plastic waste Special tool: coloured knife for triangular cheese Tedpfx Aoxrt Uijc Njf

Condition: ready for operation (used), Thermoforming Packaging Machine. S/No. 3287 (2014) with Alfa Service Printer Tsdpfx Acjw Nv A Ss Njf

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Multivac R-140 thermoformer year of construction 2005 for both hard & soft film. Foil with 422 mm, Tool Advance 330 mm, Built in Busch 100cc vacuum pump, MAP machine, 4x different tool splittings. No 1. 2.4 17x x 130 mm No 2. 1.1 283 x 365 mm No 3. 2.2 365 x 132 mm No 4. 2.2 283 x 175 mm Tjdpfx Asxl D U Tec Nef

Year of construction: 2016, operating hours: 3,781 h, condition: ready for operation (used), functionality: fully functional, Multivac R245 Thermoformer year of construction 2016 whit 4x different tool sizes. Built in Busch vacuum pump, Spinners for waste plastic, Foil width 462 mm, Advance 375 mm, Tsdexl D Ndspfx Ac Nof Tools. 1x 1:1 425 x 332 mm Max deep 150 mm. 1x 1:2 332 x 205 mm Max deep 150 mm. 1x 2:2 205 x 156 mm Max deep 150 mm. 1x 1:3 332 x 131 mm Max deep 150 mm. Including extra parts and heating plates very nice condition and well maintained machines since new by it's first owner.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, Colimatic Thera 650 Thermoformer year of construction 2000. 1x tool splitting 350 x 210 mm Maximum deep 150 mm. ideal for large products. Foil width 422mm. Tjdpfsxl D Iyjx Ac Nef