Used Thermostat for sale (219)

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range 2.Pump Module Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers MS (Mass Spectrometer) – advanced, highly sensitive detection Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Ijdexhfkzjpfx Adwoht Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Ihodpfx Adexhfl Eewjt Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, This listing is for the Smeg GW1160S Lab Glassware Washer The unit is in full working condition and is ready for immediate use Key Features & Capabilities Thermal Disinfection: Heats up to 95 °C to deliver bactericidal cleaning for lab-grade glassware Programmable Control: Microprocessor-based electronic control with 9 preset programs and ability to store 6 custom cycles RS232 Connectivity: Integrates with external printers or PCs for traceability and logging Thermodynamic Drying: Equipped with active thermodynamic drying and a steam condenser (Ecoslim) featuring cold-water injection Construction & Design Internal Chamber: Made from AISI 316L stainless steel; robust, chemical-resistant, and easy to sanitize Exterior Finish: Panels constructed from AISI 304 stainless steel for durability and easy cleaning . Dual Wash Levels: Two independent rack levels on telescopic guides to accommodate varied glassware sizes Water & Chemical Handling Water Softener Built‑In: Includes a salt-sensing, auto-regenerating softener to prevent scale and enhance cleaning Dual Water Inlets: Compatible with both cold and demineralized water sources Detergent & Neutraliser Pumps: Comes standard with peristaltic pumps for alkaline powder detergent and acidic neutraliser; can optionally add more pumps Safety & Compliance Electronic Door Lock: Ensures the door remains securely locked during high-temp cycles Safety Thermostats & Alarms: Features multiple thermostats, interlocks, plus acoustic and visual alarms . Ihsdpfexhf Aqox Adwjt Dimensions & Power External Footprint: Approximately 600 × 600 × 850 mm, suitable for standard 60 cm bench space Chamber Size: Internal dimensions ~ 525 × 490 × 570 mm (depth varies slightly by source) Power Supply: Standard: 3-phase 400 V, 50 Hz, max 7 kW .

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: Ihjdpfx Asxhfz Hjdwot ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Ihsdpfsxhflxox Adwjt Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Air conditioner / proofer air conditioner NEW Lillnord Model: PG 1000 Powerful with sophisticated technology for all fermentation rooms up to 6 sqm Ihsdpfx Ajfvvnmjdwst Temperature range +20 to 45 ° C adjustable via thermostat Humidity range 60 to 95% R.H. adjustable via hygrostat Automatic water regulation long lifetime! thanks to the proven "Lillnord system" Dimensions: 500 x 200 x 1700 mm, WxDxH DGUV V3 tested Connection 400V, 6.5 kW, 16A-CEE plug NEW device with 12 months warranty Come to our large bakery machine warehouse!

Year of construction: 2020, condition: like new (used), functionality: fully functional, Tempering device for couverture Model: Thermo-Quick Duo with 2 removable bowls Ihsdpfxsqy A Tfo Adwjt double-walled design Temperature controlled by thermostat (70°C) each bowl can be heated separately Dimensions: 760 x 410 x 240 mm (W x D x H) Used unit, cleaned with warranty and service Many more TOP tempering units in stock!

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced. Ihsdpfxox Huxue Adwet

Condition: new, Year of construction: 2024, functionality: fully functional, Standard scope of delivery • Four-stroke gas engine based on MAN Individual cylinder heads with 4V technology, bottom-mounted camshaft and roller pushrods - Engine width: 1,243mm - Engine length: 1,748mm - Engine height: 1,500mm - Compression ratio 14:1, special gas - Speed 1500rpm - Oil module consisting of radiator, filter and crankcase ventilation One oil module per cylinder bank Crankcase ventilation is integrated at the factory • Oil pump in rotor pump design One oil pump per cylinder bank - Flywheel housing SAE 1 flywheel I = 2.49 kgm2 with ring gear - Starter 24 V / 7.0 kW • Camshaft with encoder disk for electric ignition system • Dry exhaust pipe with contact protection - Exhaust gas turbocharger with water-cooled turbine housing, water-cooled bearing bracket and pressure oil lubrication • Two-stage mixture cooler • Mechanical throttle valve without actuator upstream of mixture cooler - Lubricating oil pan with 102 l volume and filler neck • without thermostat housing • Cover for front crankshaft end - 2x exhaust gas temperature sensor - 1x coolant temperature sensor - inlet - 1x coolant temperature sensor - outlet - 2x oil pressure sensor - 2x oil temperature sensor - 2x connecting cable for exhaust gas temperature sensor, length 5 m - 4x connecting cable for temperature sensor, length 5 m - 2x connecting cable for oil pressure sensor, length 5 m • engine feet GS • Standard MAN factory approval with natural gas “H” • without Oil filling • engine openings with sealing cap • Type plate German / English • Paint, light gray RAL 7035 1x combined charge air sensor for pressure and temperature 2x exhaust gas temperature sensor 1x coolant temperature sensor - inlet Ihodpfetpw Dfjx Adwjt 1x coolant temperature sensor - outlet 2x oil pressure sensor 2x oil temperature sensor

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Ihsdoxxlhnjpfx Adwst Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Ihedsncd Ecopfx Adwot Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch Ijdpfx Aox Ihiisdwoht - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Iedpfx Adsx Ihg Iewoht Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Ihodpfex Ig Ttox Adwjt Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-4E Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 189 h, load capacity: 40,000 kg, fuel type: electric, battery model: EPzS, battery capacity: 1,250 Ah, battery voltage: 80 V, color: grey, Equipment: cabin, lighting, Manufacturer: Multi-Trans Type: Electric platform truck with cab Model: SET 40 Payload capacity: 40,000 kg Year of manufacture: 2018 with TÜV appraisal for obtaining an exemption according to § 70 StVZO for public road use Loading area: External vehicle dimensions approx. 8200 x 2500 mm, clear loading area behind the cab approx. 6590 x 2500 mm Loading height: approx. 1005 mm Loading area cover: Tread plate Steering: Two-axle steering Ihjdpfox Expzex Adwot Drive type: Electric Operating hours: 189 Battery: 80 V 10 EPzS 1250 Ah, K5 Paintwork: Main frame powder-coated RAL 7037 Dust Grey, cab powder-coated RAL 5000 Violet Blue Technical condition: very good Visual condition: very good Availability: upon request Chassis: two steered axle lines, each with two oscillating axles, and two non-steered driven axle lines mounted on four longitudinal rocker arms for even wheel load distribution Cab with operating and display instruments: - At the front, centrally located in the driving direction, a comfort driver's cab, mounted sound- and heat-insulated - Driver's cab mounted on the vehicle main frame with rubber silent blocks for spring suspension - Protective tubular profile bar at the rear and on the cab roof to protect against falling objects - Windscreen and rear window made of safety glass according to directive ECE R 43 - Cab equipped with two lockable doors including sliding windows - Front and rear windows fitted with two-stage electric wipers - Sun visor for driver - Interior mirror - Interior cab lighting - Steering wheel adjustable (height, tilt) with quick adjustment - Steering wheel hydraulically assisted - Electric fresh air fan with electric heater and defroster vents for front and side windows, two-stage fan ventilation, manual stepless temperature control via thermostat - Driver’s seat air-suspended, suspension stiffness and height adjustable to body weight - Passenger seat mechanically suspended comfort seat - Direction selector forward/reverse with neutral position on steering wheel - Two-stage speed selection: creep speed up to 3 km/h, fast speed up to 6 km/h - Infinitely variable driving speed via foot accelerator pedal - Brake pedal - Battery discharge indicator with operating hours counter (only records hours during operation) - Main key switch - Emergency stop switch - Hazard warning lights - Direction indicators with visual signal and audible indicator relay - Horn - Light switch - Two external mirrors mounted on or in front of the cab, mirror arms mechanically adjustable and lockable - High-quality air-conditioning system mounted on the cab roof Special equipment: - Access step to loading area behind the cab on the left side in driving direction, with plug-in or fixed handrail; storage bracket for uninstalled handrail mounted on vehicle - 300 mm high end stop bar mounted at the front end - Vehicle can be maneuvered from the cab or via radio-controlled handheld unit from outside the cab - 9 lashing or crane rods each made of round steel welded horizontally into the outer beams on both longitudinal sides - Ultrasonic sensors for distance measurement (object recognition; not a personnel protection device), creep speed and emergency stop cutoff variably adjustable - Reversing camera system with monitor Safety features: - 2 emergency stop switches - Audible warning signal only when reversing - Rotating beacon mounted on the driver's cab, active only during driving operation

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 4082149208, The double electric fryer with a capacity of 14+14 liters and an underframe, model Z7FREH2E00, is an outstanding choice for professional kitchens or markets. This unit delivers high performance and enables the simultaneous frying of large quantities of food. The double fryer is specifically designed for intensive use in hospitality operations or high-traffic TO GO sales points. An invoice with VAT will be provided. Ihedpfx Adexwyc Rjwst Technical Data: • Dimensions in mm: external (W x D x H): 800 x 720 x 942 • Tank (W x D x H): 240 x 380 x 285 • Cupboard (W x D x H): 680 x 640 x 420 • Model designation: Z7FREH2E00 • Serial number: 4082149208 • Capacity: Tanks: 2 x 12-14 liters • Power supply: Electric: 17.4 kW / 3N / 400 V • Temperature range: Working temperature: 105 to 185 °C • Weight: Gross: 83 kg, Net: 81 kg • Year of manufacture: 2024 Condition: Used, fully functional (operated for 2 weeks) Equipment: • Stand-alone electric fryer with two directly heated standard tanks, each 14 liters • 1.5 mm thick front and cover plates made of stainless steel, side and rear cladding in stainless steel with Scotch-Brite finish, all-round rounded edges • Standard tanks with directly heated, internal heating elements • Working temperature from 105 - 185 °C, thermostatically controlled • Fill levels min / max: 12 / 14 liters per tank • Height-adjustable feet (+50 mm) Our used equipment service for you: • 6 months warranty • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Tested & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 Shipping: • Delivery or self-collection upon arrangement • Worldwide shipping on request • Shipping to islands or mountain stations by arrangement only

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 4082148808, The double fryer in electric version with a capacity of 14+14 litres and a base cabinet, model Z7FREH2E00, represents an outstanding choice for professional kitchens or markets. The unit boasts high performance and allows for the simultaneous frying of large quantities of food. This double fryer is specifically designed for intensive use in catering businesses or busy takeaway outlets. You will receive an invoice with VAT shown separately. Technical data: Dimensions in mm: external (W x D x H): 800 x 720 x 942 Basins (W x D x H): 240 x 380 x 285 Cabinet (W x D x H): 680 x 640 x 420 Model designation: Z7FREH2E00 Serial number: 4082148808 Performance data: Basins: 2 x 12-14 litres Electrical connection: 17.4 kW / 3N / 400 V Temperature range: Operating temperature: 105 to 185 °C Weight: Gross weight: 83 kg, Net weight: 81 kg Year of manufacture: 2024 Condition: Used, fully functional (operated for 2 weeks) Features: Electric floor-standing fryer with two directly heated standard basins, each 14 litres 1.5 mm thick CNS front and top panel, side and rear cladding made of stainless steel, Scotch-Brite finish, all-round rounded edges Standard basins with directly heated, internal heating elements Operating temperature adjustable from 105 to 185 °C, thermostat controlled Fill levels: min / max: 12 / 14 l per basin Height-adjustable feet (+50 mm) Our pre-owned equipment service for you: 6 months warranty High-quality brand equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or your money back Shipping or collection flexible as required Iedpfx Ajxwycqsdweht Competent advice - before and after your purchase Provision of operating instructions, wiring diagrams & spare parts Tested according to DGUV V3 Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 940 mm, total length: 660 mm, total width: 800 mm, type of input current: three-phase, overall weight: 35 kg, input current: 16 A, control voltage: 24 V, Fat fryer Model: F 48, floor-standing unit Stainless steel construction 2 immersion grids with drip tray integrated in the steam lid Manual fat pan heating adjustable up to 200°C with safety thermostat Capacity approx. 480 pieces/hour (donuts) Dimensions: 800 x 660 x 940 mm (W x D x H) Weight: 35 kg Only tested according to DGUV V3 Isdjvacdgspfx Adwjht Connection: 400V, 6 kW, 16A CEE plug New unit with warranty and spare parts service Options: Leasing & Rental Service Immersion grids Delivery service Maintenance contract E-box Service package We have a large selection of fat frying equipment in stock!

Condition: excellent (used), Year of construction: 2006, operating hours: 9,728 h, functionality: fully functional, machine/vehicle number: 431-92, total length: 970 mm, total width: 710 mm, total height: 950 mm, overall weight: 330 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 6 kW (8.16 HP), warranty duration: 6 months, Equipment: documentation/manual, The Polyair dry centrifuge is used for gentle, spotless, and residue-free drying of small bulk parts. It features slow acceleration and deceleration, thus preventing the components from scratching against each other during the drying process. The Polyair can handle loads of up to 50 kg. Ihedpfxsx Elphs Adwet The Polyair offers the following features/technical specifications: - Load capacity: 50 kg - Thermostat adjustable from 0 to 80°C - Adjustable rotation speeds: 200/400/600/800/1000 rpm - Adjustable drying time: 1–10 minutes Accessories such as fabric inserts and baskets are available from us.

Year of construction: 2023, condition: new, INTERSONIK MINISONIK series provides fast, reliable and economic solution in parts washing! Perfect parts washing systems for degreasing and precise cleaning Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Minisonik ultrasoniks washer are available in 4 different size, 4l , 12l , 18l and 28 liter versions. All minisoniks are ready for delivery. Minisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. Ihedsd I Dnvopfx Adwjt ► Dentist instruments. ► Jewellery products. ► Electronic components and PCB cards. ► Textile industry equipments. Please check the technical specifications in the attached document. ultrasonic cleaner, 18 liter ultrasonic cleaner, 12 liter ultrasonic cleaner, 4-liter ultrasonic cleaner, 28-liter ultrasonic cleaner, tabletop ultrasonic cleaner, benchtop ultrasonic cleaner Please feel free to contact us for further details

Year of construction: 2021, condition: new, Intersonik top loader rotary basket washers are a quick and economic solution to your parts washing needs. Ihsdpfxehcimzj Adwst It is easy to use and nature friendly. Top loading mechanism makes the product easy for loading and unloading the washing basket. High-pressure water is sprayed via positioned nozzles during the washing cycle at the same time basket is rotated for even better washing quality. Technical details of the top loader spray washer is listed below: Nr. - Item - Details 1 - Machine dimensions - 850 x 850 x 1000 mm 2 - Loading height - 750 mm 3 - Loading capacity - 380 mm 4 - Stainless steel body - AISI 430 (1.5-2 mm) 5 - Pump power and number - 2.5 hp x 1 6 - Pump body - AISI 304 7 - Total heating power - 15 Kw 8 - Electricity - 380 V / 3 Phase 9 - Timer - 0-30 min 10 - Thermostat - 0-90 C 11 - Basket and nozzles - Galvanized coating 12 - Electrical components - ABB and Schneider or equivalent 13 - Pneumatic components - Mag and Festo or equivalent 14 - Oil skimmer - Available 15 - Drying fan - Optional 16 - Rinsing tank - Optional 17 - Ebara pump - Available 18 - Liquid level sensor - Optional 19 - Automatic liquid filling - Optional 20 - Mist exhaust fan - Optional

Year of construction: 2023, condition: new, INTERSONIK MIDISONIK series provides fast, reliable and economic solution in parts washing! Intersonik ultrasonic cleaners are perfect parts washing systems for degreasing and precise cleaning. Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Midisonik ultrasonic washers are available in 4 different size, 40l , 50l , 60l and 80 liter versions. Midisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist’s instruments. ► Jewellery products. ► Electronic components and PCB cards. Iedpjd I Dpdsfx Adwsht ► Textile industry equipments. Please check technical spesifications in the attached document. ultrasonic cleaner, ultrasonic washing machine, 40 liter ultrasonic cleaener, 50 liter ultrasonic cleaener, 60 liter ultrasonic cleaener, 80 liter ultrasonic cleaener, ultrasonic cleaner for automotive, ultrasonic degreaser Please feel free to contact with us for further details.

Condition: excellent (used), Year of construction: 2009, Ref:10891 . 2009 ODM ‘Sticker’ Casing-in Machine + ‘Smasher’ Press. For casing-in & pressing a variety of thin to thick books into flexible or hard cases. ODM ‘Sticker’ Features:- • Easy to use control panel. • Very short set-up and strip down times. • Self-adjusting machine requires no make-ready for different case sizes. • Integral twin glue tanks, easily removed for quick cleaning. • Vacuum cover guide for accurate placement of the spine*. Hand feed of book block Vertical wing action Twin PVA cold glue tanks/application rollers Manual feed of case* ODM ‘Smasher’ Self-adjusting hydraulic pressing & building-in machine. Features:- • Easy to use control panel. • Foot pedal operated pre-set to locate the joint area of the book. • Dual hand button operation for operator safety. Ihsdpfx Adeu Tky Rowot • 10 tons of pressure for highly compressed books. • Adjustable dwell timing for pressure duration and heating forming. • Thermostatic control of heated joint forming irons. Specification: Sizes, Max: 280 x 355 mm Min: 100 x 100 mm Book thickness : 1 - 100 mm Mechanical speed, Max: 100 - 400 books/hr. (series production) Max: 100 - 200 books/hr. (one-off production)

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 600 mm, warranty duration: 12 months, input voltage: 400 V, total height: 1,250 mm, total width: 1,000 mm, total length: 1,080 mm, noise level: 65 dB, We offer Parts Washer PC 60/130 T for sale Catalogue number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us come with a 12-month WARRANTY. Equipment features: • Operating hours counter • Stainless steel safety grate • Swivel castors, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump performance: 4500 l/h Isdpewzwuzofx Adwoht • Connection power: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing/frame: Stainless steel (1.4301) • CE certified • Heater power: 4.5 kW • Maximum temperature: 80°C • Adjustable wash time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights displaying all working stages. The washing fluid temperature is maintained within the range of 35 to 80°C and is controlled via thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T operates without perishable rubber seals. Gas struts equipped with dampers guarantee effortless lid opening, while a ball valve enables easy draining of the cleaning fluid. The Kärcher parts washer operates in a closed-circuit system (using an electric pump) with a water-based cleaning solution instead of solvents, ensuring that the operator is not exposed to hazardous vapours.

Condition: like new (used), Rofin RoHS WKH/W-13000-W-MC-SON-3-D Laser Cooling System Laser Cooling System Rofin RoHS WKH/W-13000-W-MC-SON-3-D Rofin Controller LasCon WaC 2 Störk Tronic Thermostatic Controller Buschjost Solenoid Valves 400 Volts Unused stock More new and used items available in our shop! International shipping costs on request! Ihsdpfx Adsq Hdw Ujwjt