Used Thermostat for sale (228)

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, Gedpfx Aaelypy Esbekc silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,300 h, The machine is designed for prototyping and production in FDM technology, which involves applying successive layers of melted material according to previously calculated printing paths. A thermostated work chamber in which two heads work. Printer specifications: - FDM STRATASYS F270 - year of manufacture 2017 - software: GrabCAD Print - 3D printing technology: FDM Godpfx Aowmk Eqeabekc - number of heads: 2 - building materials: ABS, PLA - support material: soluble QSR - dimensions of the workspace (length x width x height): 305 x 254 x 305 mm - camera in the workspace to observe the printing process - capacity of the material drawer: 4 spools (2 spools of building material + 2 spools of support material) - automatic change of the material spool - additional head for PLA - support material washer - printing trays - remote control via computer or smartphone

Year of construction: 2024, condition: as good as new (ex-display), Spray cleaning system type L102 Basket: ø 910mm, 2 pumps ✓ Wash timer 0-60 minutes ✓ Attached control cabinet with indicator lights and controls Godpfx Aehp Dvqjabjkc ✓ Gas pressure damper for lid ✓ Body of the unit in stainless steel 1.4301 ✓ electr. heating thermostatically controlled 0-60°C ✓ Level protection and dry-running protection of the heating element ✓ circulation pumps with mechanical seals ✓ Basket drive with gear motor ✓ Basket rim Technical data: - Useful height 500mm - Basket rim height 150mm - Load capacity/batch 200kg - batches/hour approx. 2-10 pieces - Total width incl. control cabinet 1.250mm - Total depth (with open lid) 1.300mm - Total height (with open lid) 1.990mm - Tank capacity 175 Ltr. - Spray pressure 2 x 2,4 bar - Circulation capacity 2 x 110 Ltr./min. - Operating voltage 400 V/N/PE 50 Hz - heating 6,0 kW - Pump capacity 2 x 1,0 kW - Rotation drive 0,18 kW - Total connection approx. 8 kW The unit is ready for operation in our showroom in Stuttgart for demonstration purposes. Further operating hours can be added. As partner of the company Glogar we offer equipment and suitable cleaning chemistry. The machine is available for immediate delivery (subject to prior sale). For the state of Baden-Wuerttemberg we offer a technical service such as maintenance and commissioning. Offer price plus transport costs

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Gedsvzb Nqjpfx Aabokc Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Gkedpfx Asddv Iteabjc Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: good (used), Spray booth water stabilizer Technical data: Agitator Pump Filling spout Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 Thickness 3mm More articles - new and used - you will find in our store! International shipping costs on request! Godoiu Hwuspfx Aabskc

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Product Description: For sale is a HAAKE RheoStress 6000 rotational rheometer by Thermo Scientific – a high-precision measuring instrument for rheological characterization of a wide variety of materials. Ideally suited for use in research, development, or quality control. The device is not operational, however, as the air bearing is defective. Technical Specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 rpm Speed range (CS mode): 10⁻⁷ to 1500 rpm Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special Features: Very high measurement accuracy due to low mass inertia Precision lift mechanism (0.5 µm adjustment accuracy) Modular expandability (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of Delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) Godpfx Aaewv Nrhsbskc (Specifications subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone.

Condition: used, functionality: unexamined, Used mobile/stationary double-walled stainless steel liquid mixer with liquid pump and 2 x thermostat heating Kettle: double-walled stainless steel, hopper diameter 40 cm, capacity approx. 50 liters Gjdpfx Asw Eu Exeabekc Mixer: IKA RW28B, variable speed Control: 220 volts (industrial) with Siemens frequency inverter Complete with liquid pump for draining liquid from the kettle

Condition: good (used), Spiral freezer Heinen JUNIOR CT15 1. Productivity per hour: 300-500kg. (depends on lane occupancy). 2. Body: - dimensions L/W/H - 5100mm/2440mm/2590mm (+ up to 200mm legs); - PU panels, galvanized powder coated. 3. Direction of work: from bottom to top. 0°. 4. Work input/output: - product entrance: height 800mm (legs included), length 1000mm; - product output: height 2490mm (legs included), length 350mm. 5. Conveyor belt: - drive drum, number of coils: 15 pcs.; - useful distance between coils: 60-65mm; Godpfx Aaevf Ed Tobekc - stainless steel tape with a width of 508mm and a useful/working width of 400mm; - total length 130m. 6. Evaporator parameters: - cooling power: 66kW; - surface area: 425m2; - distance between slats: 2x20/2x12/10x8; - evaporation temperature: -38°C; - temperature in the chamber: -30°C; - air flow: 29600m3/hour; - defrosting: hot steam and water (14 m3/hour), outside air; - inlet/liquid phase: 42.4mm/3.6mm; - outlet/liquid-gas phase: 88.9mm/5.5mm; - galvanized steel. 7. Fan: 2 units with a power of 3kW/unit. 8. Refrigeration plant parameters: - required compressor/refrigeration power - 70kW; - condensation temperature: +42°C; - refrigerant: NH3 or R404a (R449a) with pump circulation system. 9. Electrical parameters: - power 15kW; - 400V/50Hz. When working with freon, a pumping circulation system is used. It includes: - vertical circulation receiver with lower emergency level, middle working level and upper emergency level. All are monitored by Danfoss 38e level gauges; - freon circulation pump HERMETIC-Pumpen, 11kW; - main Danfoss valves with pilot valves: start regulator and pilot valve with constant pressure next to it (for second temperature mode with evaporation temperature -23°C); - oil return system from the circulation receiver to the compressors. It consists of a thermoregulating valve, a regenerative heat exchanger and a thermostat. Additional spare parts included in the price: - 2 pcs. freon pumps; - 1 piece. motor-reducer main drive; - 1 piece. motor-reducer pulling belt; - 2 pcs. ventilators.

Condition: new, Year of construction: 2024, functionality: fully functional, Standard scope of delivery • Four-stroke gas engine based on MAN Individual cylinder heads with 4V technology, bottom-mounted camshaft and roller pushrods - Engine width: 1,243mm - Engine length: 1,748mm - Engine height: 1,500mm - Compression ratio 14:1, special gas - Speed 1500rpm - Oil module consisting of radiator, filter and crankcase ventilation One oil module per cylinder bank Crankcase ventilation is integrated at the factory Gkedetpw Dfspfx Aaboc • Oil pump in rotor pump design One oil pump per cylinder bank - Flywheel housing SAE 1 flywheel I = 2.49 kgm2 with ring gear - Starter 24 V / 7.0 kW • Camshaft with encoder disk for electric ignition system • Dry exhaust pipe with contact protection - Exhaust gas turbocharger with water-cooled turbine housing, water-cooled bearing bracket and pressure oil lubrication • Two-stage mixture cooler • Mechanical throttle valve without actuator upstream of mixture cooler - Lubricating oil pan with 102 l volume and filler neck • without thermostat housing • Cover for front crankshaft end - 2x exhaust gas temperature sensor - 1x coolant temperature sensor - inlet - 1x coolant temperature sensor - outlet - 2x oil pressure sensor - 2x oil temperature sensor - 2x connecting cable for exhaust gas temperature sensor, length 5 m - 4x connecting cable for temperature sensor, length 5 m - 2x connecting cable for oil pressure sensor, length 5 m • engine feet GS • Standard MAN factory approval with natural gas “H” • without Oil filling • engine openings with sealing cap • Type plate German / English • Paint, light gray RAL 7035 1x combined charge air sensor for pressure and temperature 2x exhaust gas temperature sensor 1x coolant temperature sensor - inlet 1x coolant temperature sensor - outlet 2x oil pressure sensor 2x oil temperature sensor

Year of construction: 1994, condition: used, Drum sieve for filtering out solids from wastewater. Additional title: drum sieve Drum sieve diameter: 600 mm Sieve basket made of split sieve ≥: 0,5 mm Speed motor: 1420 1/min Power: 1,5 kW Current: 3,75 A Voltage: 400 V Frequency: 50 Hz Length: 5,8 m Width: 0,64 m Material: stainless steel Position: 35° angle Godjvcqxdspfx Aabskc Base construction: outdoor verison Features: spray nozzle strip, drive motor (manufacturer: Bauer, type: DK 94-241), thermostat (manufacturer: Raychem), self-regulating industrial heating strips (manufacturer: Raychem)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 650 De Luxe In-Line Year of construction: 2003 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 650 mm, bottom 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power connection: 400 V three-phase current Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor. Manufacturer: Kallfass GmbH Type: Shrink tunnel Standard 650 NT Year of construction: 2006 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Gedpfx Aaewmct Tebokc Technical data: Tunnel passage width: 650 mm Tunnel outlet height: 400 mm Tunnel outlet, extended: approx. 500 mm Working height: 800 - 900 mm Power connection: 400 V three-phase current Rated power: 26.5 KW Rated current at 400 V: 38.5 A for single operation Universally applicable high-performance shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings at the bottom for precise control of the hot air outlet for optimum shrinking results even with difficult product contours. The air circulation system, a tunnel hood with additional double chamber system and significantly increased insulation all round insulation all round ensure energy-saving operation. Equipped with infinitely variable bar chain transport. Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! Gkodoncd Ecspfx Aabjc More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging Gsdpofyh Dtjfx Aabokc -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Condition: used, Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat -Manufacturer: Danfoss, shut-off valve unused in original packaging Gkedpfx Aefx Auaoaboc -Type: SVA-ST65D/148B3045 -Price: per piece -Number: 2 Stück -Dimensions package: 390/280/H115 mm -Weight: 5.7 kg/piece

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, safety valve -Manufacturer: Hansa, safety valve, unused in original packaging -Type: KSV 28 bar 2442280050 -Connection: G1/2 " -Price: per piece Godpfjfyfxbsx Aabskc -Number: 7 piece -Dimensions box: 150/80/H55 mm -Weight: 0.6 kg/piece

Condition: used, Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermo-expansion valve, Moisture-Liquid Indicator -Manufacturer: Alco, Moisture-Liquid Indicator, unused original packaging -Type: AMI-1 MM 3/PCN 805707 -Connections: 3/8 "/10 mm Gkjdpofylczsfx Aabsc -Price: per piece -Number: 3 piece -Dimension package: 130/55/H40 mm -Weight: 0.3 kg/piece

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat -Manufacturer: Jumo, temperature monitor -Type: TB "0" -System outputs: AC 110..240 V Gksdpfx Asfm T Ezjabec -Dimensions: 125/22/H110 mm -Weight: 0.2 kg

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, transmitter Gedpsfm T E Hsfx Aabskc -Manufacturer: PMA, temperature control -Type: CI 45 -Output: 500 VA, 250 VAC, 2A -Dimensions: 125/22/H110 mm -Weight: 0.2 kg

Condition: used, Frost sensor, thermostat, sensor -Active capillary tube sensor for: measuring the lowest temperatures within 0...15 °C Gkodpsd Ttrwsfx Aabsc -Voltage: 24 V -Protection class: IP42 -Weight: 0.5 kg

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, measuring transducer -Manufacturer: ABB, temperature control signal converter Gkodpfx Aaof Tdt Sjbsc -Type: CC-U/RTDR/1SVR040013R2702 -Number: 6 pieces -Price: per piece -Dimensions: 105/20/H120 mm -Weight: 0.1 kg/piece

Condition: used, Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermo-expansion valve, indicator sight glass -Manufacturer: Danfoss, indicator sight glass, unused in original packaging -Type: SGN 16s HFC-HCFC 014-0184 Gksdpfsfylcwex Aabec -Connections: 16 mm 5/8 "ODF -Price: per piece -Number: 5 piece -Dimension package: 190/40/H40 mm -Weight: 0.2 kg/piece

Condition: used, Surveillance camera, video surveillance Gjdpfx Aed Afm Djabjkc -comes from a warehouse liquidation: and are unused -Number: 2x cameras in weatherproof housing (300 mm) with heating/thermostat, 230 V. -Price: per piece -Dimensions: 395/130/H130 mm -Weight: 3 kg/piece

Condition: used, Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange Godpfx Aajfyfxqebekc -Manufacturer: Alco, thermo-valve lower part unused in original packaging -Type: C 501-7 mm/PCN 803235 -Price: per piece -Number: 10 Stück -Dimensions package: 105/80/H70 mm -Weight: 0.3 kg/piece

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve -Manufacturer: Alco, thermo-valve upper part unused in original packaging -Type: XB 1019 MW55-1B/PCN 803379 -Operating range: +10 to -30 °C -Price: per piece Gksdofx Atgopfx Aabsc -Number: 7 piece -Dimensions package: 120/120/H160 mm -Weight: 0.7 kg/piece