Used Thicknessers for sale (165)

Condition: as good as new (ex-display), With strip knife, demonstration machine Surface planer: Table dimensions 1800 x 410 mm Hsdpfovrvnvsx Airjw Max. chip removal 5 mm Planer shaft diameter 100 mm Number of planer knives 4 pieces Thickness planer: Table dimensions 700 x 406 mm Max. clearance height 230 mm Max. chip removal 4 mm Feed speed 8 m/min Motor output 3.8 kW -S6 (3 kW S1) Weight 450 kg Symbolic photo

Condition: excellent (used), Year of construction: 2018, For sale is a used Hammer planer machine A3-31 with a planing and thicknessing width of 310 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (fully functional) Technical data: Hjdpfx Ajzlthvsirjw - Planing and thicknessing width 310 mm - 3 cutterblocks (reversible cutter system) - Planing fence swiveling 90-45° - Planing table, dual folding - Thicknessing height 4-225 mm - 4 HP (3kW) motor, 400 volts The planer machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer machine, thicknesser, thickness, Felder Reference: R-A33HG

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg Hedszu Sgpspfx Airow ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Double-sided planer Jaroma, two-sided thicknesser DSRA - 40 Planing width: 40 cm 1 x bottom planing shaft with 4 knives, 5.5 kW (surface planer) 1 x top planing shaft with 4 knives, 5.5 kW (thicknesser) 7 upper feed rollers Maximum planing height: 170 mm Hjdpfoy Nlp Aox Airew Minimum workpiece length: 350 mm Power requirement: 15 kW Feed: 2 speeds Machine tested, ready for operation, in very good condition.

Condition: new, Year of construction: 2025, OPTIMAT TYTAN G630 thicknesser with a knife shaft Motor power 5.5 kW (7.5 HP) Feed motor power 0.5 kW (0.75 HP) Shaft diameter 120 mm Rotation speed 5500 rpm Feed speed 4 - 20 m/min max. workpiece width 630 mm Min. workpiece length 280 mm max. height of the processed material 300 mm The smallest thickness is 5 mm max. cutting depth 8 mm Number of knives 4 Machine dimensions 1250 x 1270 x 1180 mm Diameter of the extraction spigot 160 mm Weight 870 kg Hsdpfxellwm Ee Airsw Spiralroller + 1000 euro

Condition: used, Technical specifications: Planer: Max. planing width: 350 mm Cutterhead diameter: 110 mm Number of knives: 3 Table length: 1760 mm Hedpfoziaytsx Airew Motor power: 2.2 kW Voltage: 380 V Thicknesser: Max. planing width: 350 mm Max. planing height: 230 mm Saw: Max. saw blade diameter: 250 mm Work table with carriage Motor power: 2.2 kW Voltage: 380 V Overhead router: Spindle diameter: 40 mm Manual spindle height adjustment Spindle height: 120 mm Motor power: 2.2 kW Voltage: 380 V Overall dimensions: Length: 2000 mm Width: 1300 mm Height: 1250 mm

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP Hjdpfsw Hckrsx Airew - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 Hjdeywfbuopfx Airjw In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: good (used), Year of construction: 1990, For sale is a used SAC RS-53 thickness planer with a maximum planing height of up to 240 mm. The machine is in good condition and has been overhauled and inspected by our specialist personnel. Technical specifications: - 4-knife cutterhead Hsdpfx Aijyh Arhorsw - Planing width: 530 mm - Max. pass-through height: 240 mm - 4 feed speeds - Suction port Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1990 The planer is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, reference: R-G00 V0

Condition: good (used), Jaroma Thicknesser Max. planing width: 530mm, Max. planing height: 200mm, 2 feed speeds, Hjdpfxoztakts Airew 3 conventional knives (wedge-type), Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor 130mm dust extraction port Machine ready for operation.

Condition: like new (used), For sale is a used Hammer C3-31 combination machine with a cutting length of up to 865 mm. Hsdpszxdrlofx Airjw The machine was only used briefly for demonstration purposes in our workshop. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Jointer/planer width 310 mm - 3 cutterblocks (reversible cutter system) - Planing height 4-225 mm - Tilting circular saw 90-45° - Sliding table 1250 mm - Miter gauge - 3 motors, each with 4 hp The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, circular saw Reference: R-D1618-37

Condition: new, Year of construction: 2024, functionality: fully functional, SAW table length: 2600 mm scoring saw blade angle adjustment Hodpfxjzxptho Airsw blade height adjustment (up/down) maximum blade diameter: 300 mm ROUTER spindle diameter: 35 mm spindle speed: 2000/3100/4400/7000 rpm spindle height adjustment (up/down) PLANER/THICKNESSER working width: 410 mm 3-knife cutter block table length: 1800 rpm maximum material height: 220 mm single-speed feed HORIZONTAL DRILLING MACHINE

Condition: excellent (used), For sale is a used Record Power thickness planer with a planing length of 1110 mm. The machine has been inspected by our qualified technicians and is in very good condition. Technical data: Hjdoz E Hx Espfx Airjw - Planing width 265 mm - Planing table length 1,110 mm - Stock removal per pass 3 mm - Planing fence, adjustable up to 45° - Cutterhead diameter 75 mm - Max. thickness 190 mm - Feed rate for thicknessing 5 m/min - Motor 1.7 kW / 2.3 HP / 230 V - Dust extraction port 100 mm - Weight 162 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, surface planer, planing, thicknessing Reference: R-M61I4

Condition: excellent (used), SCM Casadei C 41 C Universal Combined Woodworking Machine with FT 200 Dust Extractor For sale is an SCM Casadei C 41 C universal combined woodworking machine, manufactured in 2016. Hsdpfx Asznbyxeirjw The machine was purchased new from Hudek Zagreb d.o.o. and has been used in production. It is fully operational and can be inspected and tested by prior arrangement at its current location in Antunovac, Croatia. The machine combines several woodworking operations in a single compact unit: Surface planing Thickness planing Sawing Spindle moulding Drilling and mortising Scoring Sliding-table operation Machine identification: Manufacturer: SCM Industria S.p.A. Make: SCM Casadei Model: C 41 C Type: C 41 Designation: Universal combined woodworking machine Year of manufacture: 2016 CE-certified version Country of manufacture: San Marino Machine weight: 628 kg Planer and thicknesser: Working width: 410 mm Surface planer table length: 1,800 mm Thicknessing capacity: 3.5–230 mm Thicknesser feed speed: 7 m/min Circular saw: Tilting saw unit: 90–45° Maximum saw-blade diameter: 315 mm Maximum cutting height: 100 mm Maximum rip-cut width on the right: 900 mm Scoring unit Sliding table Sliding table: Sliding-table length: 2,310 mm Spindle moulder: Spindle speeds: 3,500 / 7,500 / 10,000 rpm Spindle diameter: 30 mm Usable spindle height: 120 mm Drilling and mortising unit: Table travel: X 160 / Y 105 / Z 115 mm Wescott drill chuck: 0–16 mm Electrical and safety equipment: Three motors: 3 × 5.0 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current shown on the machine nameplate: 10 A Motor brakes Emergency-stop button CE version Included equipment: An FT 200 dust extractor, rated at 1.1 kW, including a flexible extraction hose, is included with the machine. Condition and availability: Condition: used and operational Previously used in production Availability: immediately Inspection and test run possible by prior arrangement Location: Antunovac, near Osijek, Croatia Price: €7,500 plus VAT The price is negotiable for a serious buyer following an inspection of the machine.

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm Hjdpfx Aisw Hcygsrow - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input current: 123 A, input frequency: 50 Hz, planing width: 630 mm, total length of planing tables: 2,900 mm, overall weight: 2,890 kg, workpiece width (max.): 630 mm, workpiece height (max.): 75 mm, number of planer blades: 15, operating speed: 333 mm/s, planer shaft diameter: 122 mm, table length: 2,900 mm, table width: 630 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, MADORA Sp. z o.o. is a Polish manufacturer of industrial machinery, specializing in woodworking and metal processing equipment. Since 2013, we have been delivering reliable, high-quality machines designed for both small workshops and large-scale production facilities. All our machines are designed and built in Poland, ensuring European quality, durability, and performance. Whether you're looking to expand your woodworking capabilities or modernize your workshop, our solutions are built to meet professional expectations while remaining user-friendly and cost-effective. The DYRA 630 is a multifunctional combination machine capable of performing three machining operations in a single pass. Its versatility and multi-functionality result from its three machining zones: Hjdpfswz D Stex Airow - Planing machine zone - Thicknesser machine zone - Multi-rip saw zone

Condition: excellent (used), Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, overall weight: 1,100 kg, Felder Format-4 Thicknesser, model Exact63 – featuring Silent-Power spiral cutterblock and Digi-Drive. A high-quality industrial thicknesser from Austria, engineered for high precision, efficiency, and continuous operation. The machine combines robust construction with advanced technology and excellent ease of use—ideal for professional joinery workshops and industrial woodworking. Equipment and features: *Silent-Power spiral cutterblock – for efficient planing and a superior surface finish. *Digi-Drive digital table height adjustment – ​​simply enter the desired dimension, press start, and the table automatically adjusts to the exact height. *LED display – shows the set value and current table height. *4 programmable settings – for smooth and efficient operation. *Variable feed speed, 5–20 m/min – adjust the speed to suit the desired result, ranging from a fine finish to rapid material removal. *Table extension – provides better support when handling longer workpieces. *Segmented infeed roller. *Additional outfeed table. Benefits: High precision and consistent planing results. Robust construction with high-quality components. High productivity during continuous operation. Advanced technology and user-friendly operation. Specifications: Working width: 630 mm Maximum planing height: 3–300 mm Hsdpfjz R I Saox Airjw Motor power: 10 hp Feed speed: 5–20 m/min Year of manufacture: 2018 Premium machine in near-new condition. Transport across Europe can be arranged at a good price.

Condition: excellent (used), CATALOGUE NUMBER 7618 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm From above: - Pawls - Toothed, pulling, twisting, sequential infeed shaft - Pressure rollers - Surfacing shaft - Pressure roller - Smooth, pulling outfeed shaft From below: - 2 sliding rollers on the table - Motor: 5.5kW - Manual table lifting - 2 feed speed settings: 7.5; 13 m/min - Diameter of dust extraction port: 160mm - Dimensions (L/W/H): 1100x1000x1200mm - Weight: 600kg ADVANTAGES - Made in Italy - Unpainted - Used thicknesser, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations) Hsdoztxdfopfx Airew

Condition: good (used), Year of construction: 1992, For sale is a used Kity AD-310 surface planer and thicknesser with a planing height of up to 230 mm. The machine is in good condition and has been serviced and inspected by our professional staff. Technical data: - 3-knife cutter block - Planing width: 310 mm - Surface planer table length: 1550 mm - Max. workpiece thickness: 230 mm - Includes mortising attachment - Motor power: 2.2 kW / 3 HP - Year of manufacture: 1992 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Hsdpfx Aieyttckjrow Related terms: surface planer, thicknesser, planer, planing, thicknessing Reference: R-Y00MG

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 520 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,250 mm, total width: 880 mm, Equipment: CE marking, documentation/manual, All SCM machines are available – we will be happy to provide you with a quote. Technical data SCM FS 520 Nova: Total length of tables: 2250 mm Working width: 520 mm Max. material removal: 5 mm Dimensions of thicknessing table: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Planer cutter diameter/planer knives: 120 mm/4 HSS knives Speed: 5000 1/min Self-braking motor: 400 V/50 Hz/S6 - 40 % 7.0 kW Dust extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Long surfacing tables (2250 mm) made in one piece enable easy surfacing of workpieces. - Work tables are made of cast iron, annealed and stress-free, making them resistant and permanently flat. - Simultaneous opening and closing of the surfacing tables with a single locking mechanism. - Powerful industrial motor. - Fixed dust extraction hood. - Robust steel/cast iron construction. - Large surfacing fence 1200 x 150 mm. - Material feed with four speeds via a separate motor. - Thicknessing table is raised on 4 robust columns, which are protected by dust bellows. - Helical infeed roller on thicknesser unit. - Rubber outfeed roller at the outlet of the thicknesser unit. - Preparation for long-hole milling unit. - Digital display for thickness setting (1/10 mm). - Automatic star-delta switchover. Hodpfx Aioz H N Ilorjw

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, tool diameter: 72 mm, number of blades: 3, actuation type: electric, rotational speed (max.): 6,000 rpm, total length of planing tables: 1,800 mm, overall weight: 355 kg, number of planer blades: 3, planer shaft diameter: 72 mm, - Year of manufacture: 2006 - Not repainted - Has undergone technical inspection - Operating manual, technical documentation TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Diameter of the knife shaft: 72 mm PLANER: - Planning width: 410 mm Hsdow H R I Sspfx Airjw - Maximum removal thickness: 4 mm - Length of planer tables: 1800 mm - Length of planer fence: 150 x 1100 mm THICKNESS PLANER: - Planning width: 404 mm - Length of thicknesser tables: 600 mm - Minimum/maximum planing height: 4/225 mm - Feed rate: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V - Diameter of dust extraction port: 100 mm Overall dimensions of the machine: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 350 mm - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps - Drilling support - dust extraction possible The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Hjdpfx Aiezltigjrsw Reference: R-N3011

Condition: used, Planer, thicknesser Krummen & Katz 4/26. Hjdpfx Aszkrulsirew

Condition: used, SAC RS/530 Thicknesser width mm. 530 Hodpfjyzfvgox Airew

Condition: used, For sale is a used Hammer C3-41 combination machine with a cutting length of 2000mm and a Silentpower spiral cutterhead. The machine was used briefly in our workshop for demonstration purposes. Technical specifications: - Cutting length 2000mm Hodjzypbzopfx Airow - Cutting width 800mm - Cutting height 103mm - Max. saw blade diameter 315mm - 4 milling speeds - Height-adjustable + swiveling - Silent Power spiral cutterhead - Planing width 410mm - 3 motors, each 4kW - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-A0117