Used Extraction for sale (4,466)

Condition: used, functionality: fully functional, Alsident System Extraction Arms. The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Good working condition. Please check out our other listings as well. Bodpsupv U Hsfx Abtodg

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Bsdpfexxalnsx Abtsdg Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines Bodpfx Ajzx Rv Dobtedg • Stand for extraction • Three-stage cleaning for effective oil and coolant mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Subject to technical changes, errors and prior sale!

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit Bdedpfxezx Rrrj Abteg • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h Bdjdpfx Absymfiisteg

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Bsdpezvgkxefx Abtjdg Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: new, Year of construction: 2024, new dust extractor Year of manufacture: 2024 For wood dust and chips, designed for commercial use Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extraction and separation of dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet Bdedezxu Tmepfx Abteg All models equipped with collision guard Dimensions (LxWxH): 1755 x 830 x 1800 mm Chip collection volume: 2 x 165 l Extraction inlet diameter: 200 mm Weight: approx. 259 kg Filter area: 22 m² Manual filter cleaning Sound pressure level: 72 dB(A) Nominal air volume: 2262 m³/h Maximum air volume: 3700 m³/h Motor: 400 V, 3 kW Availability: short-term Location: Flörsheim

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Bodpfxsvviyte Abtsdg

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Bdodpjvvizkefx Abtsg Storage location: Garbsen

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Coral, Dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg Bdedpfx Aerw A U Iebteg

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Bdodpfsy Sz Dnsx Abteg Inlet diameter: 180 mm Stock number: 1140

Condition: excellent (used), Year of construction: 2004, Mion Mosole vacuum extraction unit, used. Bsdszx Tf Ijpfx Abtedg

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Bdsdpfjzv Tmmex Abteg Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Catalog number: 8077 TECHNICAL DATA - Engine: 4kW - Voltage: 400V - Number of waste containers: one double container, 2x200l - Extraction capacity: approximately 4000 m3/h - Filter area: 20m2 - Negative pressure: 2350Pa - Extraction speed: 20m/s - Filter type: M - Extraction nozzle diameter: 195mm - Overall dimensions (L/W/H): 1700x900x2000mm - Weight: 300kg Bdsdpfxozuk Tbj Abtjg ADVANTAGES - Mobile sawdust container - Unpainted - Used extraction unit - DTR documentation - Very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower Bdedpfezwdn Djx Abtjg -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: used, Extraction unit 2500 m³ Spänex Bsdpfowzzdtsx Abtsdg Price changes, errors, printing and typographical mistakes reserved.

Condition: used, Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 10,000 m³/h, total height: 2,150 mm, total length: 2,400 mm, total width: 1,800 mm, overall weight: 1,250 kg, We are offering this used KEMPER 811000100FU extraction system, manufactured in 2018. Type: 811000100FU Airflow rate: 10000 m³/h Voltage: 400 V Rated current: 13.8 A Motor power: 7.5 kW Current: 3 ~ Frequency: 50 Hz Duty cycle: 100% Protection class IP: Control voltage: 24 V Minimum compressed air supply: 5 bar Maximum compressed air supply: 6 bar Bdjdozk Dukspfx Abteg Maximum static pressure: 2500 Pa Weight: 1250 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1994, functionality: fully functional, For sale is a mobile dust extraction unit from AL-KO, suitable for extracting wood chips and dust from woodworking machines. Technical data / Features: Manufacturer: AL-KO Model: AL-KO 100 Filter module 1 Year of manufacture: 1990 Airflow rate: approx. 2,200 m³/h Motor power: 1.5 kW Connection: 380 volts Mobile dust extraction unit Filter bag Chip collection bag Chassis with wheels Motor protection switch with on/off button Extraction nozzle Compact and robust design Condition and scope of delivery as shown in the photos The unit is suitable as a compact, individual dust extraction system for various woodworking machines. Bdedpfozv Thqsx Abtsg Inspection and demonstration are possible by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2006, Nominal volume flow: 4400 m³/h. Suction nozzle: 250 mm. Motor power: 5.5 kW. Nominal speed: 2880 rpm. Equipped with a fire extinguishing system. Weight: 730 kg. Bsdpfx Aozvn Nvsbtedg Location: Nattheim.

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap • Integrated automatic extinguishing system Technical data: • Motor rated power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg Bdodpfxshkzt Ne Abteg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Subject to prior sale

Condition: new, Year of construction: 2025, Chip extraction unit ASA 7703 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, allowing for extraction from below or above Robust metal fan impeller Bdedpfxohk S Sts Abtjg Comes standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 290 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/Depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Power consumption 4.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5.98 m² Noise emission Maximum sound pressure level 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Maximum negative pressure 2800 Pa Scope of supply: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 141 With standard chassis Dimensions and weights Chip collection volume: 175 l Nominal outer diameter of extraction nozzle inlet: 140 mm Length approx.: 1062 mm Width/depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical data Connection voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Noise emission Maximum sound pressure level: 78 dB(A) Volume flow Nominal volume flow: 1650 m³/h For milling, planing, and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Bdedehk S Swjpfx Abtjg Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for easy maintenance Robust, high-quality design Easy to move thanks to swivel castors Low power consumption Extraction systems comply with dust class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow: 6,000 m³/h Bjdpfocdy I Tsx Abtedg Rated volumetric flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Location: Available from stock at 54634 Bitburg.

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Bjdpfx Ajhk S Sdsbtedg Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Bjdjh D If Hopfx Abtedg Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg