Used Tig Welding Machinbary for sale (6,042)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4862 € 3000 x 1500 mm 3000 kg 755 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 3000 x 1500 x 200 mm with Cr75M+ hard chrome plating Table system: 16 mm Nsdjyq Srlopfx Advocp Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 Wochen ab Auftragse 3165 € 28 mm Ncedpfxsyq Sq Io Advjp Accessory set consisting of: 8 pcs. screw clamp 180° HIS28Z3000 4 pcs. screw clamp 45° HIS28Z3045 4 pcs. V-support HIS28VP100 20 pcs. quick clamping bolt short HIS28SB100 4 pcs. connnection bolt HIS28BS100 2 pcs. manetic bolt HIS28MB100 4 pcs. stop rail 150mm HIS28FA150 6 pcs. stop rail 225mm HIS28FA225 4 pcs. stop angle 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA175275 1 pc. stop angle HIS28WA325L 1 pc. stop angle HIS28WA325R 1 pc. support angle 800 HIS28W800L 1 pc. support angle 800 HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu ca. 6-8 Wochen ab Auftrag 10265 € 197.09 € 4000 x 2000 mm 850 mm 8000 kg 2340 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to Ncedpfx Aeyq Sqzodvjp - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2590 € 16 mm The set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow. Consisting of: 10 screw clamps 180° HIS16Z3000 4 screw clamps 45° HIS16Z3045 4 V-support HIS16VP100 8 stop brackets 90x37, 5mm HIS16WA9037 8 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 Ncedpfx Adjyq Sqhevop 1 piece stop bracket 500mm HIS16WA500L 1 piece stop bracket 500mm HIS16WA500R 4 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 28 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS- Cleaner-1L 1 piece Anti-stick agent HIS-Premium-1L

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1725 € 16 mm The extended entry level with added value in the set configuration for the most common work steps and applications. Consisting of: 8 screw clamps 180° HIS16Z3000 Nodpfjyq Sqbox Advecp 2 screw clamps 45° HIS16Z3045 2 V-support HIS16VP100 4 stop brackets 90x37, 5mm HIS16WA9037 6 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 2 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 20 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 929 € Ncedeyq Sp Rspfx Advsp 16 mm Starter set for anyone who wants to work professionally and efficiently contains the most important tools as basic equipment. Consisting of: 4 pieces screw clamp 180° HIS16Z3000 4 pieces stop bracket 90x37.5mm HIS16WA9037 4 pieces stop bracket 90x90mm HIS16WA9090 4 pieces stop bar 115mm HIS16FA11512 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: used, gebraucht 2468D prompt, Zwischenverkauf v Deutschland 2970 € 1 1890 € 195 kg 28 mm Nsdpfx Ajyq Spqodvjcp DEMO SET / MINT CONDITION consisting of: * 1x accessories car (Delivery is galvanised) * 4x angle stop 350 x 20 mm * 4x adjustable angle stop 250 x 20 mm * 15x Adjustment clamp * 4x Multi-clamp * 6x Stand angle, adjustable 175 x 20 mm * 2x Stand angle, adjustable 225 x 21 mm * 8x Stop rail 225 x 20 mm * 10x Socket bolt * 15x Plug holder * 3x Ball Tension Bolt * 4x Claw clamping bolt 28 x 100 mm * 15x Spacer ring

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Ncsdolddxhepfx Advop Used machine in working condition. Strip width: 15 – 80 mm. Strip thickness: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Kemper Fume filter table type fume extraction unit Nodpsyrfhvsfx Advecp

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Ncsdpfstpui Ijx Advop Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: used, Year of construction: 2003, functionality: fully functional, PVC 4 corner welding and cleaning machine Hollinger-Rotox Ncedpfx Aoyu H T Sjdvep Maximum frame size 3800 x 3800 mm The machine is functional and disassembled. Transport and installation of the machine are not included in the price.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A05B-2651-B011, arm reach: 911 mm, type of input current: DC, total height: 600 mm, load capacity: 7 kg, FANUC LR Mate 200iD/7L A05B-1142-B301 + R-30iB Mate A05B-2651-B011 | 2017 | complete set FANUC LR Mate 200iD/7L ➤ Catalogue number: A05B-1142-B301 FANUC R-30iB Mate Controller ➤ Catalogue number: A05B-2651-B011 The package also includes the operator panel (teach pendant) and all cabling! The robot is in very good technical condition, dismantled from a working installation, ready for immediate operation. 🔧 Key robot specifications: ✔ Model: LR Mate 200iD/7L ✔ Manufacturer: FANUC ✔ Year of manufacture: 2017 ✔ Number of axes: 6 ✔ Reach: approx. 911 mm ✔ Payload: 7 kg ✔ Repeatability: ±0.02 mm ✔ Robot weight: approx. 27 kg 🔧 Controller: ✔ Model: R-30iB Mate ✔ Catalogue number: A05B-2651-B011 ✔ Power supply: 200–230V Condition: ✔ Visual: very good ✔ Technical: fully functional, ready for operation ✔ Dismantled from a functioning installation 🛠 Service / Maintenance ✔ Last maintenance: May 2025 ✔ Regularly serviced ✔ Ready to work without the need for immediate servicing Applications ✔ Pick & Place ✔ CNC machine tending ✔ Production automation ✔ Packaging Ncsdpfx Adjywlgqjvop ✔ Assembly Additional information ✔ Shipping within the EU possible ✔ VAT and EU invoice available

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Ncjdpfx Adjyqr Sxevep

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment Excellent condition Height min: 1050 mm Height max: 2200 mm Total height: 3250 mm Rotational speed: 0.2 - 1.0 rpm Torque: 24,000 Nm Lifting speed: 1.5 m/min Ncsdpfx Aoytgu Tjdvop Handheld remote control

Year of construction: 2026, condition: new, functionality: fully functional, AVANTECHNO 411 is a professional mobile system for line boring and internal build-up welding, designed for precision restoration of worn cylindrical bores and pivots directly on site. The system integrates boring, internal welding (overlaying), facing, drilling, and thread cutting into a single portable unit. The equipment is mounted directly onto the workpiece, allowing on-site repair without the need for disassembly or transportation of heavy components. The coaxial centering system ensures high concentricity when restoring spaced bores. Technical specifications: - Boring diameter range: Ø 22 – 400 mm (up to 1,000 mm with additional kits) - Internal build-up welding range: Ø 25 – 400 mm Ncodpeyq Rldsfx Advjp - External build-up welding range: Ø 20 – 250 mm - Accuracy: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 450 rpm - Continuous feed travel: 250 mm (extendable via bar length) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 3 kW - Operating temperature range: −30°C to +40°C - Weight of electromechanical module: approximately 42 kg Functional capabilities: - Single-pass coaxial restoration of multiple aligned bores - Internal hole welding with continuous spiral overlay technology - Facing of flanges and mounting surfaces - Restoration of bearing seats and circlip ring grooves - Restoration of blind bores - Quick change of boring bar with welding shaft without the need for re-centering Applications: Suitable for maintenance and repair of: - Excavators, loaders, and construction equipment - Mining machinery and processing equipment - Agricultural machinery - Cranes and lifting equipment - Industrial and heavy mechanical assemblies Advantages: - On-site repair without disassembly - Significant reduction of downtime and transport costs - Compact and portable design - Manufactured in the EU with a 24-month warranty - Engineered for heavy-duty industrial applications

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Ncedsrk Itcepfx Advjp Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 220 V, overall weight: 50 kg, warranty duration: 24 months, AVANTECHNO 611 is a heavy-duty mobile line boring and internal welding system, designed for precise on-site restoration of worn cylindrical bores and pivot joints. The machine combines boring, internal welding, facing, drilling, and thread cutting in a single portable unit. It mounts directly onto the workpiece, allowing repairs without dismantling heavy components, while maintaining precise coaxial alignment of multiple bores. Technical specifications: - Boring diameter range: Ø 62 – 600 mm (Ø 32 – 1,000 mm with additional kits) - Internal welding range: Ø 350 – 1,000 mm - Accuracy: up to 0.01 mm (H7 tolerance) - Feed rate: 0 – 0.5 mm/rev - Maximum bar rotation speed: up to 300 rpm - Continuous feed travel: 300 mm (extendable) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 2.5 kW - Weight of electromechanical unit: approximately 50 kg Applications Ncodpfx Ajyq Rivedvjp Suitable for repairing: - Excavators and construction machinery - Mining and industrial equipment - Agricultural machinery - Cranes and lifting equipment - Heavy-duty mechanical assemblies Advantages: - On-site repair without disassembly - Reduced downtime and transport costs - Portable and robust construction - Manufactured in the EU with a 24-month warranty - Designed for heavy industrial applications

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Ncjdpfxjiypxij Advop Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg

Condition: new, Year of construction: 2012, Type: BAS Maximum welding width up to 40 mm. Butt welding machine. Manual tensioning. Band width up to 40 mm. NEW machine. Delivery from stock. Weight: approx. 40 kg. Packaging included. Ncodpeywunwefx Advsp 220 V, 50 Hz.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200020800, The tools on the machine are for Kommerling 76 PVC profiles. Ncodpfxsyvibvs Advsp

Condition: new, Year of construction: 2025, Protec welding rotary table 5000 Kg load capacity speed infinitely variable 0,05 - 0,5 rpm manual remote control height 600mm diameter 1500mm Ncsdpfx Aeid Szcsdvjp Foot remote control extra charge

Condition: new, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton load capacity, available as a set or individually. Driven on both sides. The machine is offered as a synchronized set or as individual units. Protec turning/positioning device Syncrolift. Double column, wireless and manual hand remote control. Column adjustment electrically drivable in both directions. Load capacity 10,000 kg, 360° rotation. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Njdowtq Dtepfx Advecp Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available as a mono model (more economical). Optional with articulated flange (cardan flange).

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Nedpfx Ajuk Niyodvjcp Speed 0.5 rpm Vertical adjustment 500 mm Clamping plate diameter 1000 mm Rotation 2.2 kW Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: like new (used), functionality: fully functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Ncsdpfx Adjwd Twqovop Weight 4700 kg with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: good (used), load capacity: 2,000 kg, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Ncedpfxjxxvabj Advop Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m