Used Tig Welding System for sale (38,143)

Condition: good (used), machine/vehicle number: 75804, Welding current range AC Tig: 7 - 390 A Hfsdpfx Aajb Nv Irs Sef Welding current range direct current Tig: 6 - 230 A Electr. connection: 380 V, 45 A space requirement: 1100 x 600 x 1370 mm

Condition: good (used), MERKLE Insquare W 300 AC/DC lasapparaat met originele kabelset Hodpel Sm Hbefx Aa Sjff Primair: Spanning: 3 x 400 V Frequentie: 50 (60) Hz Cos phi: 0,95 TIG DC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire maximale stroom: 19 A TIG AC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire piekstroom: 19 A MMA-lassen: Stick-elektroden: 1,5-6 mm Open spanning: 80 V Werkspanning: 20-32,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 13,1 kVA Primaire continue stroom: 19 A Primaire piekstroom: 22 A Lasproces: 10-standenschakelaar: TIG DC Min, TIG DC Plus, TIG DC Min met startpuls, TIG AC Geluidsarm, TIG AC Blokgolf TIG AC "Gebalanceerde TIG", Elektrode Min Elektrode Plus Elektrode "Sinusgolf" Elektrode Blokgolf Keuzeschakelaar 1: 10-standenschakelaar: Stroom 1, Tijd 1, Stijg- en daaltijd, Startstroom, Eindstroom, Ontstekingspuls, Punttijd, Gasvoor- en nastroomtijd Keuzeschakelaar 2: 9-standenschakelaar: Stroom 2, Tijd 2 (voor pulsmodus), AC Balans, AC Frequentie, Hotstarttijd en -stroom, Stroominstelling, Elektrode d, Display U Instellingen: 2 draaiknoppen voor keuzeschakelaars 1 en 2 Displays: 2 LED-displays met voorloop- en hold-functie voor stroom, spanning, tijd Tijdfuncties: 4-standenschakelaar: UIT, langzame puls, snelle puls, puntlassen Ontsteking: 4-standenschakelaar: UIT, hoogfrequent, Lift-Tig Energieregeling: 4-standenschakelaar: op het systeem, hand- of voetafstandsbediening, lastoorts Bedrijfsmodus: 4-standenschakelaar: 2-takt, 4-takt, 4-takt met 2 stromen, gastest, test, programma Programmageheugen: 20 vrij toewijsbare geheugenplaatsen AC-frequentie: 50-200 Hz AC-balans: 9-91% Gasvoorstroomtijd: 0-3 s Gasnastroomtijd: 0-25 s Stroomstijgingstijd: 0-2 s Stroomdalingstijd: 0-20 s Ontstekingspuls: 0-100 ms Puntlastijd: 0,1-2,5 s Langzame pulsen: 10 ms-2,5 s Snelle pulsen: 50 Hz-5 kHz Hotstarttijd: 0-1,5 s Hotstartstroom: 10-200% Stroominstelling: 100-250% Knop: Testbeveiliging Knop: Programmaselectie LED: Netspanning AAN, Overtemperatuur, Storing, Beveiligingscircuit, Display hold, Startstroom Stijging, Stroom 1, Stroom 2, Reductie, Eindstroom Stroombron: IGBT-omvormer Ontsteking: Hoogfrequent of Lift-Tig Norm: EN 60974-1 "S" / CE Toortsaansluiting: EURO-centrale aansluiting met 5-polige stekker Toortskoeling: Watergekoeld koelsysteem 50 mm² aansluiting: Werkstukkabel 50 mm² aansluiting: Elektrodelaskabel Netaansluiting: 4 x 4 mm², 5 m lang Gasaansluitslang: 2 m Gewicht: 130 kg (300 AC/DC) Afmetingen L x B x H: 910 x 600 x 910 mm met gasfleshouder Gasfleshouder: 10 - 20 - 50 l gasfles Financing through our bank is also possible. komplett-konzept.leasingo.de Vind meer artikelen - nieuw en gebruikt - in onze shop! Internationale verzendkosten op aanvraag!

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A Hedpfx Aaou Sqqij Soff primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Hfsdpetd Hhdofx Aa Sef

Condition: excellent (used), Year of construction: 2017, Welding system with KUKA KR 16 L8 ARC HW welding robot, KRC4 controller, FRONIUS CMT welding machine, KP1-HC2000R1000 positioner, year of manufacture 2017 KR 16 L8 ARC HW welding robot Serial no.: 867100 Hfjdpjyv Ex Djfx Aa Sof Year of manufacture: 2017 Number of axes: 6 Reach: 2015 mm Payload: 8 kg Weight: 240 kg Controller: KRC4 Serial no.: 330800 KP1-HC2000R1000 positioner Serial no.: 152229 TransPuls Synergic 4000 CMT R welding machine Serial no.: 28245624 100% duty cycle: 320 A 60% duty cycle: 365 A 50% duty cycle: 400 A VR7000-CMT 4R/G/W/F++ wire feeder Safety system Torch cleaning station Reference run limit switch – Safe operation RotoLab – Torch angle correction Festo air preparation unit Pneumatic control unit Torch cleaning station

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Hjdpsxf Up Isfx Aa Soff

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Filter-area: 228m2 Capacity: 15.000 m3/h - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 Hfsdpfewrr Htsx Aa Sjf - Control type: Herding MP 12 - Control: CNC - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Hodpfxeyx Exvs Aa Seff

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam Hodpfocrtliex Aa Sjff start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm warranty: 6 month for material

Condition: ready for operation (used), Year of construction: 2008, TIG welding system Adjustment range: 10 - 320 A Hfodpfx Ajwx H Aiea Sof Adjustment range for electrode: 25 - 280 A Duty cycle at 60/100%: 320/260 A Electrical connection, mains voltage: 400 V Weight: 290 kg Space required: 1200 x 600 x 950 mm

Condition: ready for operation (used), Welding current at 25% duty cycle: 250 A Welding current at 100% duty cycle: 110 A Welding current continuously adjustable: 5 - 250 A Electrical connection: 380 V Space required: 650 x 600 x 1100/1500 mm high Weight: 55 kg Hjdpfxewvggpj Aa Seff

Condition: used, Inrush time: 40%/270A Maximum amperage: 270A Equipped with: cool arc 21 cooler Online auction of metalworking machines and welding equipment (including SAFAN, DARLEY, SCHIESS, WMW/NILES, ABUS (hall) cranes, VDF, EWM, LINCOLN, FERREX, OP plants and ESAB welding columns, various welding roller stands and welding manipulators PEMA, ADK etc.) from the recent bankruptcy of Bronswerk Heat Transfer BV, the renowned manufacturer of heat exchangers for the oil and gas industry, among others, in Nijkerk, the Netherlands. The online auction opens Thursday 26 March and closes Tuesday 21 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 16 April Pickup days are on: - Wednesday 6 May - Thursday 7 May - Friday 8 May Hedpjy Acnisfx Aa Soff Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2002, condition: excellent (used), Weld length: 1600 mm For pipe diameter: 150 - 800 mm Sheet thickness: 0.5 - 3 mm Electrical connection: 400 V, 27.5 kVA Weight: 1850 kg Required space: 3400 x 1000 x 2300 mm Hsdpfx Aaeyfgago Sjff

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: water, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance Hedpeyzpb Hofx Aa Seff AC Frequency Electode option Including Parweld PRO18 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Welding current at 25% duty cycle: 250 A Welding current at 100% duty cycle: 110 A Hjdpfx Aewvgg Noa Ssff Welding current continuously adjustable: 5 - 250 A Electrical connection: 380 V Space required: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Condition: used, Duty cycle: 35%/270A Maximum amperage: 270A Equipped with: cool arc 46 cooler Online auction of metalworking machines and welding equipment (including SAFAN, DARLEY, SCHIESS, WMW/NILES, ABUS (hall) cranes, VDF, EWM, LINCOLN, FERREX, OP plants and ESAB welding columns, various welding roller stands and welding manipulators PEMA, ADK etc.) from the recent bankruptcy of Bronswerk Heat Transfer BV, the renowned manufacturer of heat exchangers for the oil and gas industry, among others, in Nijkerk, the Netherlands. The online auction opens Thursday 26 March and closes Tuesday 21 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 16 April Pickup days are on: - Wednesday 6 May - Thursday 7 May Hodpfx Asyzbtuea Seff - Friday 8 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine / welding system Hfjdpfeu Hg Aqsx Aa Ssf Technical data can be found in image no. 2 You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid is available. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description may occur and are subject to change.

Year of construction: 2015, condition: ready for operation (used), A complete longitudinal beam welding system (vehicle carrier) Merkle with a tack welding station, a cooling station and a longitudinal beam welding machine is available. Beam height range: 70mm-500mm, max. beam length: 13700mm, flange width: 120mm/150mm, flange thickness range: 5mm-20mm, web plate thickness range: 3mm-10mm, clear width: 85mm-500mm, web offset at 15° transition: 50mm. 1) Welding system, track length: 20m, rotating device: 0°-45°, total clamping and tack welding range: 14300mm, guide spacing: 500mm, roller conveyor height: 800mm, welding process: MIG/MAG-Pulse-Arc, travel speed: 6m/min, vertical stroke: 800mm, horizontal stroke: 2x270mm, power sources: 2x HighPulse 550 RS, torch: MSB 400W. 2) Tack welding device, tack welding position: 45°, max. changeover time: 10min. 3) Transport and cooling line, tack welding area roller conveyor length: 15000mm, buffer and cooling area roller conveyor length: 15180mm, welding area roller conveyor length: 18055mm, roller diameter tack/buffer/welding: 80mm/80mm/200mm, roller width: 245mm/245mm/2200mm. Documentation vorhanden. An on-site inspection is possible. Hedeyx H Hnspfx Aa Soff

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Hedeyx Hpispfx Aa Sjff Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: good (used), Welding current: 10 - 200 A Weight: 103 kg Siegfried Volz Machine Tools Hedpjyrglcefx Aa Ssff Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Hfedpfxev Iq Tlj Aa Sef Basic data: Year of manufacture: 2019 Weight: 6021 kg Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Hsdpfx Asthigrea Soff Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure Hsdjthit Ejpfx Aa Sjff The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder lead and hose kit nozzle and lens starter kit Specifications laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Hsdpferumymex Aa Ssff Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Condition: new, functionality: fully functional, input voltage: 380 V, Equipment: cabin, The EasyArc welding robot from OTC DAIHEN Easy Plug & Play installation with the FD19 V8 + ARXIS/Welbee MIG MAG or the FD19 B6 + A350P/A500P ACDC power source. Welding table with intelligent system grids for clamping and positioning workpieces. Fully assembled and CE-compliant documentation. Optional with a Horizontal Rotary Positioner for tube/pipe welding. Operational with the TeachBox or PhotoTeach. What is supplied: Hfjdsywgq Rspfx Aa Sof OTC MIG/MAG or TIG power source OTC FD19 V8 or B6 Robotic arm 1200x2000mm 3D Siegmund clamping table Housing CE Documentation TeachBox or PhotoTeach controller Optional: Horizontal Rotary Positioner for welding tubes/pipes. Mobile compact design: space-saving, flexible and economical to purchase. Simple operation with OTC Easy Teach control: minimum time required to create the welding programme, even without extensive training. Welding programme creation even without extensive training Stable and precise welding robot: relieves employees and ensures optimised, constant welding quality optimised, constant welding quality Safety technology according to CE standards: Electrically monitored, lightweight protective housing. Feel free to contact us for more information.