Used Timber Drying Kiln for sale (3,105)

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Duedporxtuisfx Ad Ijp Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Year of construction: 2016, condition: used, WOOD DRYING KILN CHAMBER NARDI INTERNATIONAL K 200 – 2016 For sale: Industrial timber drying kiln NARDI INTERNATIONAL K 200. The chamber is in excellent technical condition and ready for operation. 1. Main specifications Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: 80°C hot water, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) ——— 2. Construction Chamber made entirely of acid-resistant aluminium (suitable for oak processing). Aluminium panels with 140 mm glass wool insulation. INOX screws eliminate thermal bridges. Exterior cladding made of trapezoidal sheet with integrated ventilation channels. Structural resistance: • Snow load up to 120 kg/m² • Wind load up to 100 km/h ——— 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. ——— 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts The system significantly reduces energy consumption. ——— 5. Control system CE control cabinet, IP55. PC Computer with LEONARDO 3.0 software (Windows 7). Features: • Multi-stage cycle programming • Parameter archiving • Graphic process visualization • Control of up to 32 chambers ——— 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ——— 7. Commercial information Availability and price: • Price: 50,000 EUR / unit • Available: 4 units (4-chamber module) • Module price: 200,000 EUR • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 Dodpfx Adoygcwws Isup For inquiries, please contact us via email or WhatsApp.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6381/99, 2 connected kilns, timber volume, each 142m3 , total = 284 m3 concidering: Dsdpfx Ajwynnijd Ioup - 50x100 boards, stacking factor 0.85 - each kiln 24 stacks 4.2x1.2x1.2m + 12 stacks 5.1x1.2x1.2m ; 1m free space in front and 1m behind the stacks, 0.15m between the stacks - inside dimensions of each kiln: width 15.2m (3 stacks), depth 7.3m (4 stacks), height 4.1m (3 stacks) - dimensions of loading door 15.2x4.1m , lifting-sliding type of 2 pcs. Inspection doors in rear walls. - loading system frontal forklift , 2 sliding trolleys for the loading door of lifting-sliding type Heating power 610,000 Kcal/h at 60'C inside temperature. Heating system: hot water, 90'C at inlet min, bi-metal pipes, stainless steel core with external aluminium fin, including the automatic valve for the hot water with intercept valves and stainless steel pipes till rear wall of dryers Rehumidification: cold water 3.5 bar, 150l/h. The spraying device by stainless steel pipe and changeable nozzles on brass. Number of fans each kiln, installed in long aluminium pipes (Nardi patent): 12 , reversible, 800mm, changed power motors 4.0/1.1kw, two speeds. Long pipes increase the air flow, reducing the pressure drop, saving energy. The horizontal aluminium baffles closing the free space over the stacks Number of vents each kiln: 8+8 cast aluminium vents Snow load 120 kg/m2, wind speed 100 km/h The electric switchboard cabinet per each kiln. Voltage: 400V , 50Hz . Type of control: LEONARDO 3000 (renewed in 2007) Each kiln has 12 wood moisture probes, 2 kiln temperature probes and 2 kiln relative moisture probes, 3 digital read outs of these values. Dismantling will be done by buyer. Seller provide a forklift if needed.

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Duodpouvi Saofx Ad Iep Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2013, condition: ready for operation (used), A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible. Dsdpfxjyrtayj Ad Ieup

Condition: used, Technical data: on request Dodpfoxvb Sqjx Ad Isup Paint room from Höcker Polytechnik consisting of: - Spray wall approx. 3 x 2.5 m - Supply air duct - Heat exchanger - EX lamps.

Year of construction: 2015, condition: used, NARDI INTERNATIONAL K 200 WOOD DRYING KILN – 2015 For sale: Industrial wood drying kiln NARDI INTERNATIONAL K 200. The unit is in excellent technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. —— 1. Basic Specifications Batch capacity: approx. 115 m³ Duedpfx Adeygcw Ds Iop Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) —— 2. Construction Chamber made entirely of acid-resistant aluminium suitable for oak. Aluminium panels with 140 mm glass wool insulation. INOX bolts, thermal bridge elimination. External cladding made from trapezoidal sheet with integrated ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind speed up to 100 km/h —— 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High temperature bearings • Individual frequency inverters Provides uniform and energy-efficient drying. —— 4. Heat Recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts System significantly reduces energy consumption. —— 5. Control System CE control cabinet, IP55 rated. PC with LEONARDO 3.0 software (Windows 7). Features: • Multi-stage cycle programming • Parameter archiving • Graphic process visualization • Control of up to 32 chambers —— 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module —— 7. Commercial Information • Price: 60,000 EUR / 1 unit • Available: 2 units (2-chamber module) • Module price: 120,000 EUR • Sale only as a 2-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For enquiries, please contact us via email or WhatsApp.

Year of construction: 2016, condition: used, NARDI INTERNATIONAL K 200 WOOD DRYING CHAMBER – 2016 The machine is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. ⸻ 1. Basic parameters Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water at 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) ⸻ 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels insulated with 140 mm glass wool. INOX screws eliminate thermal bridges. Exterior sheathing made of trapezoidal sheet metal with air ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h ⸻ 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures even and energy-efficient drying. ⸻ 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts This system significantly reduces energy consumption. ⸻ 5. Control system CE control cabinet, IP55. PC computer with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • parameter archiving, • graphic process visualization, • control of up to 32 chambers. ⸻ Dsdpjygcwksfx Ad Ijup 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ⸻ 7. Commercial information • Price: EUR 50,000 / unit • Available: 4 units (4-chamber module) • Module price: EUR 200,000 • Sale only of complete module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If you are interested, please contact us by email or WhatsApp.

Year of construction: 2021, condition: used, For sale: NARDI INTERNATIONAL K 200 wood drying chamber / kiln (2021) The unit is in excellent technical condition, complete and ready for operation. Equipped with a LEONARDO 3.0 control system and heat recovery system. — 1. Basic specifications Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating capacity: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz Dusdpfx Adoyf Uynj Iep • 230V / 50 Hz (controls) — 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels insulated with glass wool (140 mm). INOX (stainless steel) screws, eliminating thermal bridges. External sheathing of trapezoidal sheet with ventilation ducts. Construction resistance: • Snow load up to 120 kg/m² • Wind resistance up to 100 km/h — 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. — 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducting The system significantly reduces energy consumption. — 5. Control system CE-compliant control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • parameter archiving, • graphical process visualization, • control of up to 32 chambers. — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial information • Price: 72,000 EUR / unit • Availability: 5 units (5-chamber module) • Sale only as a set of 5 units • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For enquiries please contact us via email or WhatsApp.

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Dodpfxsvwfhie Ad Ioup

Condition: new, functionality: fully functional, Capacity: from approx. 200 up to over 2,000 EPAL pallets (1.2 × 0.8 × 0.15 m) Product description: The Superplan is a professional system for drying and heat‑treating pallets in full compliance with the ISPM‑15 standard, ensuring proper sanitization for export. Designed to handle any type of wood, it reliably achieves a core temperature of 56 °C for at least 30 minutes, guaranteeing the elimination of pests and pathogens in accordance with international regulations. Available heating options: - Gas - Electric - Hot water / steam Its modular design allows for front loading or tunnel configurations, optimizing hot‑air circulation and improving thermal efficiency through controlled internal ventilation and dedicated core‑temperature sensors. Key benefits: - Variable capacity: from 200 up to over 2,000 EPAL pallets per cycle. - Guaranteed compliance with ISPM‑15 export requirements. - Flexible heating options: gas, electric, or steam/hot water. - Energy‑efficient with precise ventilation control and core‑temperature monitoring. - Robust and adaptable: ideal for high‑productivity industrial operations. Duodpfsw Hfv Dsx Ad Iep Superplan is built for pallet manufacturers and wood processors exporting worldwide — combining efficiency, regulatory compliance, and flexible energy options in a single, high‑performance solution.

Condition: used, For sale - 3 kilns. Excellent technical condition; visual condition as per photos. Please see dimensions and specification for each kiln in attached pdf document. Kilns has been dismantled and standing in our warehouse. We can arrange an assembly of the kilns in the buyers location. For any further questions and inquirys, please feel free to contact us. Dedpfsw Apncjx Ad Ioup

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations. Dujdpow Hf Adefx Ad Ijp

Condition: excellent (used), I am selling wood drying kilns in very good condition. Dujdpoxf Nybjfx Ad Iep

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production. Dedpfxoq Nyzbe Ad Isup

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Dujdpsyffqqjfx Ad Ijp

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Duodpfx Adoycvxmo Iop Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System Djdpfjya Hvqjx Ad Isup 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: Duodpfjq Nfuzjx Ad Ijp - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Duodpfx Adoq Igyve Isp Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h Dodpfxoyrxwwj Ad Isup * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 16 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price Djdpfxoxpilxe Ad Isup To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2022, condition: new, racks: 17 support tube spacing: 60mm rack length: 650mm langth: 200 - 2000mm rolls: Polyamid 4 Stück depth: 870 - 1180mm Dodod Ry I Njpfx Ad Isup height: 198mm safe load: 400kg

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA Dodpfex Uz Rmox Ad Isup - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, Description Technical Data Product number T 1100 A Year of Production 2020 Width of the belt 650 mm Dedpfsui Am Uex Ad Ioup Drive type chain Max load weight 250 kg Material Stainless steel Weight 360 kg Dimensions 1100x1100x1700 mm Power 4 kW Electricity Supply: 400V, 50Hz, 5N The machine for blowing water off the package after the shrinking process is designed for packaging fresh meat, cheese and processed meat Automatic water blow-off machine Available blowers with two different belt speeds High standard of hygiene Closed blower compartment reduces noise intensity Internal conveyor with variable speed Machine after capital service in perfect condition Meets all the requirements of the European Union in terms of standards and safety - CE certificate. Net price Video how it works: