Used Condensation Drying Wood for sale (8,972)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. Crodpfx Asq Nfuzea Neb 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: excellent (used), Wood dryer from the Italian company OS PANTO 4 chambers – each: - width: 16.9 m - length: 13.5 m - gate height: 5.9 m Batch capacity per chamber approx. 270 m³ Crjdeyw H H Eopfx Aa Njb Complete with full documentation, automation, ALENT control software

Condition: new, XPLAN is the result of almost 50 years of Incoplan's experience in providing highly efficient and energy-saving methods for drying wood, all over the world, in every climate condition. Compared to conventional air exchange systems, condensation drying with XPLAN requires about one-third of the electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved, but it can also be used occasionally for pallet and firewood drying. XPLAN PRO is the upgraded version, designed for up to 20 m3 of wood. Suitable for both enthusiastic hobbyists and professional woodworkers, these systems guarantee the best price/quality ratio for wood drying. Credpsw Ug Atsfx Aa Neb Build or buy your own chamber, simply place and plug in XPLAN or XPLAN PRO, and start your drying process. We provide complete design plans for the optimal drying chamber to be built.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Crsdpfxsvllxdo Aa Njb Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment - Fully automatic drying process - Fast installation in under 24 hours Codpfsw Hfzasx Aa Nerb - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Codpfx Ajw Hf Adja Njrb Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. Crsdetqlp Rspfx Aa Njb an exhaust air flap. The vacuum pump is used for rapid dehumidification.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Crodpfx Aaotqlqao Neb

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Showroom model. Condition like new. Crsdpfx Aasyyb Nye Nob We offer for sale a drying chamber powered by a high-efficiency gas burner with an indirect system (no open flames) for heat exchange. Suitable for all types of wood, softwood, hardwood, as well as for pallets or firewood. Used only occasionally for demonstrations and drying cycle tests, 100% fully functional.

Year of construction: 2021, condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Input of one about 100 m3 - total 300 m3 Crjdpfevkxmfex Aa Njb Dryers used only for tests - practically new. Complete with full documentation, automation, laptop and internet connection (remote control).

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Csdpfx Ajdzqn Uoa Nerb Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers chamber dimensions 6.5 x 4 x 4.1m Csdpfx Aajvzuutj Nsrb furnace power 350kW

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) Crodpfxjmidtre Aa Neb -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Crodpowp Rqfofx Aa Nob Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 4,850 kg, total height: 2,900 mm, total length: 10,000 mm, total width: 2,300 mm, Used wood thermal modification chamber. Made of high-quality materials, it ensures effective thermal modification. An ideal solution for wood processing professionals. The chamber was purchased new in 2021 from SUKHOVIY LLC, model KTMD 9. Very rarely used, it was decommissioned in 2023. Credpfxex E Slvs Aa Nsb The chamber modified spruce and pine wood, but also suitable for other species. Operation and thermal processing process are very simple; all you need is electricity and a water. The chamber has a retractable loading cart and a foldable frame that allows the cart to be rolled out. Basic parameters: - Total volume: 28.5 m³ - Load capacity: up to 10 m³ at a time - Power: 48 kW - Maximum power consumption: 260 kW/m³ - Minimum power consumption: 150 kW/m³ - Maximum internal temperature: 235°C - Dimensions (L x W x H): 10.0 x 2.3 x 2.9 m - Weight: 4,850 kg The chamber comes with an instruction manual in Polish and an EC Declaration of Incorporation.

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. Crsdpstpxy Tjfx Aa Nsb The machine is brand new and has not been commissioned.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Codpfow Uf S Hox Aa Norb

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Crsdpfxsya Ik Ao Aa Nsb Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. Csdpfxsq Igyve Aa Nerb B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Cjdoy Na Hvjpfx Aa Njrb Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: Crsdpfeyrdg Djx Aa Nob - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: new, Year of construction: 2025, planing width: 5,100 mm, overall weight: 1,055 kg, power of feed motor: 75 W, spindle speed (min.): 6,000 rpm, Wood-Mizer MP365 High-performance four-sided planer/moulder with additional fifth head Brand new machine Processing parameters: Crsdsy Emxkopfx Aa Neb Four-sided: Planing width: 15–350 mm Planing height: 10–160 mm Two-sided: Planing width: 10–410 mm Planing height: 10–230 mm Single-sided: Planing width: 10–510 mm Planing height: 10–230 mm Feed speed: 3–15 m/min Technical parameters: Top spindle – straight knives 510 mm, 2 pcs, 6000 rpm Bottom spindle – straight knives 410 mm, 2 pcs, 6000 rpm Side spindles – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max side head height 160 mm Fifth spindle – 30 mm spindle, 3000/6000/9000 rpm, 270° tilt angle, max head height 130 mm Motors: Top spindle – 5.5 kW Bottom spindle – 4 kW Side spindles – 3 kW Fifth spindle – 3 kW Feed – 0.75 kW Total motor power: 19.25 kW 3 phase, 400 V, 50 Hz, 31.4 A Dust extraction ports – 4×100 mm, 1×125 mm Weight: 1055 kg Year of manufacture: 2025

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Csdpfx Aaovzub He Nsrb Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: new, Year of construction: 2022, functionality: fully functional, We offer this stationary WOOD MIZER EG300, in new condition, year of manufacture 2022. Manufacturer: WOOD MIZER Model: EG300 Year of manufacture: 2022 Condition: new Type: stationary Csdpeyngfbefx Aa Njrb If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Codpfx Aasyr Dfae Norb Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg