Used Industrial furnaces for metalworking for sale (204)

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Knedpfx Afsz I Tt Isnsc Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic Knsdszz A Rrepfx Afnjc

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 200.170, functionality: fully functional, operating hours: 1,000 h, power: 18.75 kW (25.49 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 750 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,500 mm, total width: 1,400 mm, total height: 1,500 mm, overall weight: 400 kg, number of chambers: 1, number of shelf rows: 1, control type: manual, actuation type: electric, Equipment: CE marking, For sale: ThermConcept recirculating oven due to business closure. Knsdjz Rn Hcjpfx Afnoc Very even temperature distribution in the combustion chamber. Manual control with timer. The oven was operated in production at a maximum of 500°C and is in perfect working order. The door seal is in good condition.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12-month warranty, immediately available, in stock. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers; not available individually due to shared control system! -Drawers extend on telescopic rails -Drawers are locked individually with quick-release fasteners -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow is horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating capacity per oven: 17.4 kW -Documentation, CE declaration of conformity Knsdpfx Afs Aa Aivjnec Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, stress-relieving oven.

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Kodpfx Afeya H Uyonjnc

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, 1 FOUR-TUNNEL DRYING / DEBURRING / COOLING SYSTEM Brand: SAT - Automatic conveyor for trays holding your parts o Tray dimensions: L = 475, W = 325, H = 210 o Payload: 80 kg o Maximum temperature: 150 °C o Electric heating o Ventilation o Heating length: 2620 mm (width 550, height 300) o Dwell time: 1 hour (adjustable) o Inlet and outlet airlocks on the oven A Kjdpjzkt Ugsfx Afnjnc Attached: - Drawing - Description - Photos (more available upon request) Inspection possible in working condition in Northern Switzerland, near Lausanne.

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual, FOUR IPSEN TQ 2/7 - Completely refurbished in 2010 - Usable dimensions: 910*610 H=500 - Gas-fired heating with radiant tubes - Control (load and atmosphere) via PROTHERM 500 system PRICE (incredible!): €32,000 EXW (excluding VAT) Kedpfsz Iayuox Afnenc ENDOTHERMIC GENERATOR IPSEN 2018 (new retort in 2023) - Gas-fired heating - Reaction gas = natural gas PRICE: €32,000 EXW (excluding VAT) Equipment to be dismantled by the buyer (We can provide a quote for dismantling and loading onto a truck) Equipment available immediately Inspection possible (Saint Etienne 42)

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Knsdpfxszq Ax Uj Afnsc Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, temperature: 1,300 °C, number of chambers: 1, control type: PLC-controlled, fuel type: gas, Equipment: documentation/manual, No. 1 Industrial car furnace / USED, year 1999, for heat treatments on metals (tempering, annealing, normalizing, stress relieving, preheating, sintering), and for firing ceramics and porcelain. Type: STC2400 Maximum temperature: 1300°C No. 1 motorized car No. 1 flap door Thermal power: 240,000 kcal/h Power supply: 400 V 3-phase + neutral + ground, 50 Hz Control panel type: ATR 313 Knjdpfx Aezxxm Rjfnec No. 1 heat exchanger made of stainless steel Machine sold as is, where is.

Condition: good (used), Year of construction: 2007, Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm Kedjz Tfc Tepfx Afnonc -Weight: 87 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Knodpfezylxcex Afnjc Gas burner with a power output of 125-390 kW.

Condition: good (used), Year of construction: 1990, operating hours: 16,400 h, AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 Kedpfenzhx Hox Afnenc External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper Kodpezbr U Uofx Afnonc -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. The furnace is in excellent condition and has seen very little use. Maximum temperature: 1,320°C Knodpfjz H I N Iox Afnsc Power: 30 kW Heating power: 1 control zone, zone 1 = 30 kW Thermocouple: Type S with a diameter of 0.35 mm in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Kedpfoz Rn Duox Afnsnc

Condition: used, Promeos Industrial Gas Furnace 850 °C For sale is a high-performance, gas-fired PROMEOS industrial chamber furnace, manufactured in 2018. The unit reaches a maximum furnace temperature of 850 °C and has a rated thermal output of 300 kW. According to the available technical data, operation is intended for natural gas types H, E, and L, as well as propane. The furnace features a lift-up door and is suitable for industrial heat treatment and production processes. Technical Data Manufacturer: Promeos Unit designation: BA 31010.0561.0000 Year of manufacture: 2018 Max. furnace temperature: 850 °C Rated thermal output: 300 kW Burner heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas type H, E, and L / Propane Gas connection pressure: 100 mbar Propane consumption: approx. 11 m³/h Combustion air requirement: approx. 335 m³/h Exhaust gas mass flow: approx. 453 kg/h Air ratio: 1.35 ± 0.05 NOₓ at rated load: approx. 20 ppm CO at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Dimensions (W × D × H): approx. 3,000 × 3,000 × 3,400 mm (height including lift-up door) Internal/usable space dimensions (W × H × D): 1,500 × 950 × 1,500 mm Usable space volume: approx. 1.58 m³ Last known maintenance: 2021 "All from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! Knsdoz Ipuuopfx Afnec International shipping costs upon request!

Condition: used, PROMEOS Gas-Fired Chamber Furnace For sale is a gas-fired industrial furnace with a maximum furnace temperature of 750 °C and a specified rated thermal output of 40–80 kW in total. The system is designed for operation with natural gas or propane and features two burner heads of type ECO 03-40. The furnace is from the year 2016. The last known maintenance was performed in 2021. Equipment and Features Gas-fired industrial furnace system Maximum furnace temperature of 750 °C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Technical Data Manufacturer: PROMEOS System Designation: BA 31010.0484.0000 Year of Construction: 2016 Maximum Furnace Temperature: 750 °C Burner Heads: 2 × ECO 03-40 Rated Thermal Output: 4 × 10–20 kW Fuel: Natural gas type H, E, and L / Propane Gas Connection Pressure: 50 mbar Propane Consumption: approx. 3.9 m³/h Combustion Air Requirement: approx. 120 m³/h Exhaust Gas Mass Flow: approx. 165 kg/h Air Ratio: 1.35 ± 0.05 NOₓ Emissions at Rated Load: approx. 20 ppm CO Emissions at Rated Load: approx. 10 ppm Electrical Connection: 400/230 V AC, 3L/N/PE Electrical Connection Power: 4 kW Protection Class: IP54 Weight: approx. 4,700 kg Sound Pressure Level: ≤ 70 dB(A) Dimensions of the PROMEOS Chamber Furnace - Width: 2,800 mm - Depth: 2,700 mm Kjdpez Ipcxjfx Afnsnc - Height including lifting door: 3,400 mm “We offer a suitable bank financing option for your project – all from one source.” You can find more articles – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2022, Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Kodpfjz Rn Dzex Afnjnc

Condition: excellent (used), Year of construction: 1999, ROHDE KE 770 S Series Kiln Five-sided heating ensures optimal temperature distribution across the entire firing range. This reliable unit is ideal for both ceramic workshops and ambitious individual creators. Key advantages: Kjdpoz Advljfx Afnonc * Maximum temperature of up to 1300°C – ideal for a wide range of firing processes * Controller with 10 programs – convenience and precision in operation * New heating coils – guarantee of reaching full temperature and efficiency * Technical condition: very good – kiln ready for immediate use Technical specifications: * Chamber capacity: 770 liters * Chamber dimensions: * height: 130 cm * width: 70 cm * depth: 83 cm * Power supply: 400 V * Power: 40 kW This is a robust and proven piece of equipment that will last for many years and ensure excellent firing results.

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Kedpfx Afexwn R Nononc Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Kodpfxsz Snfce Afnsnc Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: good (used), Year of construction: 1973, rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen Knodpjzvfdqsfx Afnsc

Condition: used, Padelttherm HGU 9408/800 Hearth Car Circulation Furnace For sale is a professional Padelttherm heat treatment system / hearth car circulation furnace, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth car furnace with circulation. Two chain conveyors are also part of the documented complete system. Technical data Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth car circulation furnace / heat treatment system Material to be treated: Aluminum housings Temperature / heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. total load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower heating value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Circulation - 4 burners, each with 130 kW - 2 of these with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per circulator - 2 hot gas circulation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas circulator: 2 × 4.0 kW - Combustion blower: 7.5 kW - Lift door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni, Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Clear dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth incl. track: 10,165 mm - Height incl. door portal: 4,355 mm Knsdjz Hvzropfx Afnjc Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,400 °C, inner dimension length: 400 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 1,020 mm, total width: 810 mm, total height: 1,510 mm, overall weight: 400 kg, Equipment: CE marking, 2 electrically heated chamber furnaces, manufacturer Thermconcept. Type: KC 64/14 Maximum temperature: 1400 °C Knsdszmfvnjpfx Afnjc Internal dimensions: 400 x 400 x 400 mm (W x D x H) External dimensions: 810 x 1020 x 1510 mm (W x D x H) Volume: 64 l Power: 15.0 kW Current consumption: 22 A

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Ksdpfx Aozqclhjfnjnc