Used Timer for sale (577)

Condition: like new (used), Generally overhauled Price: 5.500EUR Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes Tedpfxjx N Ed Tj Abtsb

Condition: like new (used), Generally overhauled machine Price: 4.500EUR Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Tjdpox N Efqsfx Abteb Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Condition: new, PRICE: 1900 EUR Spiral dough mixer Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system Tedpfex U Efbex Abtsb In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bowl Capacity: 60 liters Electric Power: 3kW Machine Size: 840x480x1000mm

Condition: like new (used), Generally overhauled machine Price: 4.500EUR Dough mixer With paddle Kemper The machine has 2 speeds Tjdox N Efdopfx Abtob Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 50kg of flour Voltage: 400V / 50Hz

Condition: good (used), 839 USED Spiral mixer + 2 removable aluminum bowls with a capacity of approx. 120 kg of dough. EXTERNAL DIMENSIONS (in cm.): - L: 134, - W: 95, - H: 132, BOWL DIMENSIONS (in cm.): - H: 553, Tedpfx Aeualh Aobteb - top W: 90, - bottom W: 67. TECHNICAL DATA: - capacity: 120 kg of dough - 2 speeds - reverse gear, - timers for 1st and 2nd gear The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Brand and Model: ACME GOZUA RC 2-75 Type: CENTERLESS HYDRAULIC CYCLES Intermitten ( with stop at the end of the cycle.) Total time for fast feed, slow grinding feed, and stop at the feed carriage setting ( adjustable by timer) 1 to 100 sec.. DIAMOND CUTTING Maximum diameter difference in copy: 8 mm Total tMaximum copy taper : 30º COOLING EQUIPMENT Pump flow rate : 45 l /min Tank capacity: 100 l Decanting compartments : 4 EXTERNAL AND MAIN DIMENSIONS Tsdpfxezq Sfks Abtob Total machine length: 2.350 mm Total machine width : 1.560 mm Total machine height: 1.450 mm Height of the grinding wheel axes 1.050 mm. External dimensions of shipping packaging : 2.400x1.700x1.600 mm Shipping packaging volume: 6.53m3 WEIGHTS Net: 2.340 kg Gross with cage packaging : 2.445 kg Gross with shipping packaging: 2.485 kg

Condition: good (used), Year of construction: 1995, FINIX 500 is a finishing system flexo photopolymer plates up to 500 x 800 mm (about 19 "x 31"). This finishing unit has the exposure section with ultraviolet lamps and sliding tray is entirely made of stainless steel, which is produced after posteksponirovanie normal processing, including preliminary exposure, exposure, washing and drying, are usually performed FLEXO apparatus 3 or 5. When the normal process is completed, fleksoplastina usually dry to the touch, but sticky and you must give it rigidity posteksponirovaniem. FINIX 500 eliminates the tackiness while giving the plate rigidity and making it durable and resistant to abrasion and mechanical stress by exposing respective light sources. Exposure is carried out two types of lamps emitting ultraviolet radiation with different spectrum, each of which produces a certain effect on the wafer. Special germicidal lamps eliminate tackiness, and UV lamps complete posteksponirovanie plate, making it harder. The exposure time for each type of lamp can be set independently of each other, enabling the simultaneous or separate exhibition with different duration. Each type of light is controlled by its own control panel with digital display. FINIX also presented a model 120 plates measuring 35 "x 47" (900 x 1200 mm). UV lamps bactericidal lamps FX 14x30 w 2x20 lamp cooling system posteksponirovaniya timer digitale Timer finisher digitale exhaust system Power 380V, 3 phase, 50 Hz Tedpfx Ajcwi Tfsbteb dimensions 108 x 92 x 42 (H) cm net weight 130kg

Condition: used, functionality: fully functional, We offer for sale a Heraeus T 5050 E /ct1974 in excellent condition Drying cabinet, industrial oven. Ventilated oven with 2 shelves. Nominal temperature max: 250°C volume approx. 180 liters Power: 2000W. 1 phase 50Hz Dimensions Interior 50x49x50 cm., housing: 79x56.5x65.5 cm. With Heraeus kelvitron controller - with continuous/timer function. Temperature protection DIN 12880 Protection class: IP20 Tsdpfx Absugtz Rjtjb

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Todey Tiaaspfx Abtsb Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: new, Year of construction: 2026, CORMAK FAN2200 Material Handling Fan – High-Performance Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN2200 is a high-performance industrial material handling fan designed for efficient extraction of sawdust, wood chips, dust, and other airborne particles generated during the processing of wood, engineered wood products, plastics, and composite materials. Equipped with a 2.2 kW three-phase motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 4,000 m³/h, providing reliable support for industrial dust extraction systems while maintaining a clean and safe working environment. Key Advantages Airflow up to 4,000 m³/h for efficient transport of dust and wood waste 2.2 kW / 400 V motor designed for continuous industrial operation 2850 RPM operating speed ensures powerful and consistent airflow Large connection diameters – Ø200 mm inlet and Ø180 mm outlet Compact dimensions (575 × 550 × 500 mm) suitable for stationary and mobile installations Heavy-duty steel construction built for demanding workshop and industrial environments Construction and Technology The FAN2200 features a direct-drive centrifugal impeller mounted directly on the motor shaft, reducing power losses while improving reliability and efficiency. The dynamically balanced impeller minimizes vibration and operating noise, ensuring smooth, trouble-free performance. The powder-coated steel housing offers excellent resistance to wear, corrosion, and mechanical damage. The fan can be used as part of a centralized dust extraction system or as a dedicated extraction unit for individual machines. Performance and Efficiency With an airflow of 4,000 m³/h, the CORMAK FAN2200 effectively removes fine dust as well as heavier wood chips generated by thickness planers, spindle moulders, panel saws, and CNC machines. Designed for continuous-duty operation, it maintains stable suction performance even in high-dust environments, helping to extend filter life, reduce machine wear, and improve overall air quality in the workplace. Applications Tedpfevugg Ujx Abtsb The CORMAK FAN2200 is ideal for: Woodworking and furniture manufacturing facilities CNC machining workshops Plastic processing plants Centralized dust collection systems Industrial production lines generating high volumes of dust and chips Its flexible connection options also allow the FAN2200 to operate as either a standalone extraction fan or as part of a larger pneumatic conveying system. Standard Equipment 2.2 kW / 400 V three-phase electric motor Direct-drive centrifugal impeller Powder-coated steel housing Ø200 mm inlet connection Ø180 mm outlet connection Optional Equipment Flexible suction and discharge hoses (Ø180–200 mm) Adapters and duct reducers Textile or bag filtration systems Timer controls and remote start systems Technical Specifications Parameter Value Maximum Airflow 4,000 m³/h Inlet Diameter 200 mm Outlet Diameter 180 mm Motor Speed 2850 rpm Motor Power 2.2 kW Power Supply 400 V Dimensions (L × W × H) 575 × 550 × 500 mm Weight 35.5 kg

Condition: new, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Tjdpfsvuggbsx Abteb Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg

Condition: used, TECHNICAL DETAILS 220 POWER SUPPLY - Timer : min [min] - Temperature : °C [°C] - Capacity : 6,9 [l] - Tank dimensions : 488 x 120 x 99 [mm] Tsdpfxju Dbpgs Abteb - Basket dimensions : 465 x 106 x 49 [mm] - Machine weight : 5,6 [kg]

Condition: used, TECHNICAL DETAILS - Volume : 4.3 [l] Todpfx Abeu D I H Sstsb - Timer : 0-120 [min] - Temperature setting : 0-100 [°C]

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Tedpfx Aszn N Ecsbtob Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: used, mileage: 3,77,500 km, power: 355 kW (482.67 HP), first registration: 10/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 480 LD NGD LED interior lighting: Luxury Tedpjzi Idmofx Abtob Rear: SR1344 air suspension Pneumatic control for parking brake Front mirrors Idle shutdown, 5 minutes FMS connector, extended and prepared JOST JSK42, cast iron, 150 + 12 mm Armrests on both sides of the driver's seat Xtra Comfort mattress + topper under the sleeper bunk 12-speed TraXon 12TX2210 DD transmission, 16.69-1.00 Headlights without height adjustment Interior trim color: Luxury Driver's seat, fixed base Co-driver's seat, fixed base Auxiliary heater with waste heat recovery and timer Dashboard table Automatic transmission with manual override – full version Exhaust pipe on the right Front chassis design: floor plate Basic immobilizer Rear axle load capacity 11.50 t Digital tachograph, Stoneridge 1C, version 1 Emission class Euro 6 Traction control system (ASR) Driven rear axle(s): 295/60R22.5 Fixed cab steps Rear drive axle with disc brakes High sleeper cab Splash guard Curtains with partition curtain Front underrun protection Steel wheels, silver-grey Speed limiter, 90 km/h Running board step on the left Work lights, LED Standard transport, full version Automated transmission, TraXon, 12 gears Eco-Fuel Heated fuel pre-filter Front air suspension: low DAF Connect Fuel tank on the left Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load capacity index 156 Rear axle 1, 11,500 kg, load capacity index 145 Steel air reservoirs Door panel: loosely woven fabric Cab wall lining, textile Electronic Stability Control (VSC) Front axle(s): 355/50R22.5 Lane change warning system Power windows Pollen filter LED daytime running lights Driver Performance Assistant CO2 indicator: Y Adjustable roof spoiler, short Central locking Generator 130 A, batteries 2 x 230 Ah LED headlights, cornering and fog lights Electrical trailer connection 24V/15-pin, cable: 15-pin + EBS 790-liter aluminum fuel tank, step on the left, H 580 mm Antennas: DAB-prepared, radio, 2x mobile, GNSS, extra: CB Upper sleeper bunk DAF Infotainment Exclusive with luxury speakers Cab air-suspended MX-13 engine, 355kW/483hp, cab emblem: 480 Armrests on both sides of the co-driver's seat LED skylights Two LED spotlights for the cab rear wall Turning assistant Additional cab insulation ZF Intarder Cab, interior trim: Argenta Steering wheel, leather Front: 8.00 t, air suspension, 161 N Mechanical differential lock Accessory power supply: Standard + 2x 40 A Windshield with sun visor Rear lights with LEDs Exterior sun visor Co-driver's seat: cinema style, table, fabric upholstery Refrigerator and drawer Side deflectors Wheelbase 3.80 m / rear overhang 0.87 m Rear view camera, prepared Running board with step, long 2 rotating beacons Automatic cab climate control Predictive Cruise Control ECAS remote control with extended functions Driver's seat: Luxury Air Axle load monitoring Airbag (driver) and 2 seat belt pretensioners Protective net on both sleeper bunks Rear axle ratio 2.21 CAN J1939 functions in the body connector Executive package XD/XF Auxiliary air conditioning with remote control 2x rotating beacon

Condition: used, mileage: 52,000 km, power: 125 kW (169.95 HP), first registration: 01/1989, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Year of construction: 1989, Manufacturer Mercedes Model 1117 4x2 Fire truck - Feuerwehr - Bomberos - Tankspritze Year 1989 Condition Good Serial Number WDB67601215364319 Ref. nr. 927725 Reg. date: Hk: 170 Km: 52.000 Gearbox: 4-speed automatic Diesel tank: 1 Tank liter: 150L Crew cabin: ? Cabin type: Crew cabin Drum brake: ? Tire Size: 245/70R19.5 Cover% left 50% - 90% Front suspension: Springs Suspension rear: Springs Toolbox: ? Total weight: 11000 Kg Tsdpfxsvkz Ire Abtsb Net weight: 7000 Kg Load capacity 4000 Kg Pump: Rosenbauer Pump timer: 834 Ladders: ? Light pole: ? Hose reel: R-Side + L-Side

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 - User-defined macro programming Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Todewxdpgjpfx Abtob Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm Todpfx Aboxbtvfjteb - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, total length: 680 mm, overall weight: 320 kg, total width: 720 mm, total height: 1,710 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 320 kg, Rego SM 4 mixing machine, refurbished with timer control The machine for all your mixing needs! 2 operating functions: 1 x mixing / 1 x whipping Tsdpfszk S Edsx Abtsb Shaft/mixing shaft newly overhauled Powerful and robust technology 1 mixing paddle and 1 whipping paddle 1 stainless steel container Container lighting, timer with DGUV V 3 certification Connection: 400V, 16A-CEE plug Dimensions: 720 x 680 x 1710 mm, W x D x H Quality from a specialist company! Used machine, refurbished with warranty

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 09/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 1,500 kg, overall weight: 1,500 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral mixer Diosna SP 240 AD Tjdpfjzk S D Tsx Abtsb Spiral mixer, dough machine, extendable Diosna model: SP 240 AD Dough mixer for a maximum of 240 kg of dough robust design! 2 timers and 2 speeds Lifting and lowering via control automation Connection: 400V, 32A-CEE plug Used machine

Condition: reconditioned (used), Oase SPK 50 spiral mixer - used - capacity: 80 kg of dough (50 kg of flour) - 2 speeds - 2 timers - bowl and mixing arm made of stainless steel - the unit has been refurbished - very good technical condition - pick-up from the warehouse / optional delivery to the buyer - price upon request Todpfxeznwg Io Abteb

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be Todpfxot Hw N Ho Abteb automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Todpfet Hwupsx Abtjb Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine / combination spray cleaning system, type L101 HP Automatically operated hot water parts washing machine with basket drive via gearbox motor, stainless steel washing pump (manufacturer: Lowara), spray system with stainless steel nozzles Additionally, manual cleaning with high-pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting - Basket diameter: 910 mm - Usable height: 490 mm - Max. load weight: 200 kg - Spray pressure (washing pump): 2.3 bar - Spray pressure (HD pump): adjustable up to max. 60 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 60°C) - Machine dimensions (L x W x H): 1,300 x 1,500 x 2,100 mm - Empty weight: approx. 200 kg ++Wash cycle timer freely adjustable (minutes and hours) ++Complete cleaning machine (internal components and external housing) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2,000 microns) ++Operating hour counter ++Steam extraction with condensate return Tedpsd R Ahlefx Abteb ++Omron timer for time setting in seconds/minutes/hours OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B • Power Supply: 200 V • Power Supply Type: 3-Phase • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip Tsdpfx Aszk I Afebtob • Ethernet (LAN) Interface • Extended Memory Control Module • FANUC Macro B • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h • General overhaul including geometric overhaul. The machine has only operated for approximately 504 hours since the overhaul Additional Equipment • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)