Used Tos Varnsdorf for sale (22)

Condition: refurbished (used), functionality: fully functional, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed length W-axis: 800 mm, workpiece weight (max.): 12,000 kg, spindle stroke: 800 mm, year of last overhaul: 2025, Equipment: documentation/manual, WHN13-CNC, OVERHAUL 2025 | 3.0996 Hjdoztqyfepfx Aflsfk ■ HORIZONTAL BORING MILL – T-TYPE ■ PRODUCER: TOS VARNSDORF ■ OVERHAUL YEAR: 2025 RETOS ■ CONDITION: AFTER OVERHAUL ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ HEIDENHAIN TNC 640 control system ■ Handwheel HR510 ■ HEIDENHAIN drives and SIEMENS motors ■ Ready for cooling through spindle axis and automatic tool changer ■ Can be equipped with other optional accessories - delivery on request

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, spindle diameter: 128 mm, spindle speed (max.): 3,500 rpm, table length: 850 mm, table width: 850 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 920 mm, feed length Z-axis: 950 mm, workpiece weight (max.): 5,000 kg, year of last overhaul: 2024, WFQ80CNC, Overhaul 2008 | 3.0585A ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ OVERHAUL YEAR: 2008 (RETOS) ■ CONDITION: USED, EXCELLENT ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ Heidenhain TNC426 control system with handwheel HR410 ■ SIEMENS motors and drives ■ operator housing against swarf and water ■ magnetic swarf conveying system Hfjdpfxjztqq Ds Aflsk SCOPE OF REPAIR 2024 ■ cleaning, revision and technical inspection ■ replacement of Heidenhain TNC426 control system ■ refurbish of electrical cabinet ■ exchange of damaged cables ■ repair of control panel ■ complete machine geometry repair (geometric accuracy protocol on request) ■ revision of drives (new ball screw bearings X+Z) ■ revision of headstock ■ revision of hydraulic power pac ■ revision of lubrication and clamping ■ new telescopic covers

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Hfsdpfx Ajt Hkh Ajflek

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Hodpow Iu Nhjfx Afljfk Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,200 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO 50 Travel X-axis: 1,250 mm Travel Y-axis: 1,100 mm Travel Z-axis: 950 mm Travel W-axis: 630 mm Table size: 1,120 x 1,000 mm Table load capacity: 3,000 kg Hodpfx Afezd Avyolsfk

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. Hfsdpfx Aozc D E Isflsk - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm Hodpfx Afew Nmw Holjfk W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,220 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. • Control system: NCT-104 Spindle • Spindle diameter: 130 mm • Taper: ISO 50 (7:24) • Spindle speed range: 10 – 1500 rpm • Max spindle torque: approx. 2350 Nm • Main motor power: 37 kW Axis Travels • X-axis travel: 3500 mm • Y-axis travel: 2000 mm Hfsdex Imtaopfx Aflsk • Z-axis travel: 1220 mm • W-axis (spindle quill travel): 570 mm Table • Rotary table size: 1600 x 1800 mm • Max workpiece weight: 12,000 kg • T-slots: 22 x 9 x 160 mm • B-axis table feed: 0.03 – 1.5 rpm Feed Rates • Rapid traverse (X / Y / Z / W): 2000 mm/min Power • Total power requirement: approx. 80 – 83 kVA

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Hfjdozff A Eepfx Aflek Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: used, Year of construction: 1983, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 1,400 rpm, year of last overhaul: 2014, Conventional lathe Brand: TOS Varnsdorf Type: W9A Year of manufacture: 1983 Electrical cabinet overhauled in 2014 (see photos) Spindle speed: 28–1400 RPM Travel (X-Y-Z): 1400x1250x1050 mm Hsdpfx Afszlfl Tslsfk Digital readout

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Hfsdpfx Afjy T E Itslsk Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, Spindle diam. 130 mm Spindle nose attachment iso 50 X-axis stroke: 4000 mm Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC I 530 ATC 60 places Hfedpfx Afevxvcaoljk Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Condition: used, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, X-AXIS TRAVEL 2000 MM Y-STROKE VERTICAL 1400 MM Z-AXIS TRAVEL COLUMN: 1250 MM W-AXIS SPINDLE TRAVEL 710 MM TABLE 1400 X 1600 MM WORKPIECE LOAD 8000 KG SPINDLE SPEED 10 - 2000 RPM Hedox Da Sljpfx Aflsfk ISO 50 RAPID FEED X Y Z 10000 MM/MIN CNC HEIDENHAIN TNC 426 ATC 60 PLACES

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Hfjdpfxsy H Dahs Aflek Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, including a rotary table S 35, table dimensions 2850 x 3150 mm (photo in the attachment), 2 clamping plates, a HUI 50 swivel head, a tool magazine for 80 tools, and a Siemens 840 D control system. WRD 150 CNC Hfjdpfx Aoy U Ndzefljk Year of manufacture: 2008 Control system: SINUMERIK 840 D X-axis: 9000 mm Y-axis: 4000 mm Z-axis: 1000 mm W-axis: 800 mm Power: 60 kW Tool magazine capacity: 80 tools Clamping plates: 2, 6000x2000 mm Swivel head: HUI 50

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Hfjdpjyvuh Isfx Aflok Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,600 mm, Travel paths X-axis travel: 3500 mm Hfedsyifpfopfx Afljk Y-axis travel: 2500 mm Z-axis travel: 1600 mm Worktable NC rotary table: 2200 x 1800 mm Max. table load: 12,000 kg Max. spindle speed: 2,500 rpm Tool holder ISO-50 Accessories: - Chip conveyor

Condition: refurbished (used), CNC Heidenahin or Sinumerik Travel distance X-axis: up to 1,800mm Travel distance Y axis: up to 1,600mm Travel distance Z-axis: up to 1,250mm Table load: up to 5,000kg Spindle diameter: 105mm Spindle speed (max.): 3,300 rpm Table length: 1,400mm Table width: 1,600mm Travel distance W-axis: 630mm Optional: Automatic Tool Changer.....40 pos Coolant through spindle.....20 bar Splash guard around rotary table Hodpjr Hdqxefx Afljfk Chip Conveyor Oil cooling unit (chiller) Touch probe

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg Hfjdpfx Afoy Edl Uslok MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Travel X-axis: 1,200 mm Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg MACHINE DETAILS Control system: HEIDENHAIN TNC426 Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Hjdpfx Afoy Edgfelefk Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h EQUIPMENT Handwheel: HR410

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, travel distance W-axis: 800 mm, CNC Boring Mill TOS VARNSDORF Technical Specifications Brand: TOS VARNSDORF Model: WHN 130 CNC: Heidenhain ITNC 530 Year: 1999 / Fully Retrofitted 2014 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm PRICE AND FURTHER INFORMATION ON REQUEST Hodpfsx Tfngex Afljfk (CNC, SIEMENS, HAAS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, Machining, PINACHO, MORI SEIKI, Milling Machine, Lathe, Grinding Machine, Boring Mill, Press, Laser, Shear, Press Brake)

Condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Z-axis: 1,250 mm, Spindle diameter: 130 mm X-axis travel: 3,500 mm Hfodpoy Hgvrefx Aflsk Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm B-axis (table): 360º W-axis travel (quill): 800 mm Table size: 2,200 x 1,800 mm Max. table load: 12,000 kg CNC: Heidenhain 424 M Spindle speed (2 ranges): 10 - 2,500 rpm Coolant tank: Yes Tool holder: BT 50 Weight: 42,000 kg Dimensions: 6,460 x 6,960 x 4,400