Used Transfer for sale (3,725)

Condition: used, mileage: 3,82,410 km, power: 390 kW (530.25 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Cab & Comfort* GigaSpace cab, 2.50 m, flat floor * Comfort seats (driver and passenger side, air-suspended seats, leather upholstery) * Comfort beds (lower and upper, PremiumComfort mattress) Rsdpfs Agyadex Airjch * Electric windows, LED ambient lighting, electric auxiliary air conditioning, automatic climate control * Multifunction steering wheel, leather steering wheel * Electrically operated sliding/lift roof (glass version) * Refrigerator in drawer under the bed * Various storage compartments, drawers, and stowage spaces Carpet, rubber mats, curtains, sun visors (electric and side)----Engine & Drivetrain* Engine OM471, R6, 12.8 l, 390 kW (530 hp), 2600 Nm * Engine version Euro VI, E * Transmission G 281-12/14,93-1.0, Mercedes PowerShift 3 * Single-plate clutch Axle ratio i = 2.412----Chassis & Axles* Front axle air-suspended (8.0 t), angled design * Rear axle, crown wheel 440, hypoid, 13.0 t, differential lock * Air suspension on front and rear axles Aluminum rims (Dura-Bright, Alcoa)----Safety & Assistance Systems* Electronic braking system with ABS and ASR * Disc brakes on front and rear axles * High Performance Engine Brake * Secondary water retarder * Stability control assistant (ESP), lane keeping assist, distance assist, attention assist * Active Brake Assist 5, Active Sideguard Assist * Traffic sign assist, tire pressure monitoring * Driver airbag * Cruise control, speed limiter Emergency flashing lights during emergency braking, warning vest, warning triangle, first aid kit----Electrical System & Multimedia* Multimedia cockpit, interactive * Navigation system, digital radio, sound system * Comfort telephony with wireless charging * CB radio, 24 V * Various sockets (12 V, 24 V, power socket) Truck Data Center 7, preparation for FleetBoard Manager App----Lighting* Bi-Xenon headlights, LED daytime running lights, LED rear lights, LED turn signals * Automatic high/low beam and cornering lights * Fog lights, surround lighting, work lights Headlight cleaning system----Tanks & Fuel Supply* Main tank 570 l (left, aluminum), second tank 290 l (right, aluminum) * AdBlue tank 75 l (left) Tanks lockable----Additional Equipment* Fifth wheel coupling from factory (Jost JSK 37C, low maintenance) * Various storage compartments and exterior flaps * Chrome interior package ----* Tire dimension front axle: 385/55 R22.5 * Tire dimension rear axle: 315/70 R22.5 * Fuel tank: 860 liters (570 l + 290 l) * AdBlue tank: 75 liters * Technical permissible gross weight: 18000 kg * Unladen weight: 8171 kg * Permissible trailer load: * Overall length: 6158 mm * Wheelbase: 3700 mm * Next inspection due: 04.2027 ----Vehicle number: 12635----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/Main inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transfer Vehicle registration Vehicle recovery and transport ----YOUR VTS TEAM

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure Rcsdoz E Dzqopfx Airsh – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: used, mileage: 33,155 km, power: 125 kW (169.95 HP), first registration: 01/2022, fuel type: diesel, overall weight: 3,270 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0617. MC31179 ----EQUIPMENT * Trailer hitch - 13-pin - 90° tailgate opening angle - Lane Keeping Assist * Package: Off-Road Package - Rear limited-slip differential, 100% * Package: XL-1 - Off-Road Package (rear limited-slip differential 100%), - Vinyl flooring * Kunath conversion to a 3-way tipper * Transmission: 6-speed manual * ABS * Airbag: Front and side airbag system for driver and passenger - Driver's side airbag deactivation function - Knee airbag for driver - Head airbags, above the side windows * All-wheel drive (switchable four-wheel drive) with electronic transfer case * Exterior mirrors, electrically adjustable and heated * Exterior mirror housings, black * On-board computer * Particulate filter: Diesel particulate filter (DPF) with SCR catalyst * Differential, open * Tachometer * Third brake light * ESP (Electronic Stability Program) * Power windows * FordPass Connect * Heated windshield * Cruise control - Distance warning system - Intelligent Speed Assist with adjustable speed limiter - Lane Keeping Assist - Traffic sign recognition system * Grab handle, driver and passenger side * Tailgate lock * Rear window, heated * Rear window wiper * Air conditioning * Headrests (2) in front * Paint: Solid color * Load securing system with protective frame on the back of the cab * Center console * Package: Load compartment 5 - Load securing system with protective frame on the back of the cab * Package: Seat 31 - Driver's seat, manually adjustable - Side airbag for driver and passenger - Warning tone for unfastened driver and passenger seat belts - Map pocket on the back of the driver's seat * Upholstery: Fabric * Radio: Audio system 43: Radio with 3.5-inch TFT display - USB connection - Bluetooth interface - DAB - Four speakers * Rear mud flaps * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Start-Stop system incl. front spoiler lip * Socket: 12-volt socket, one socket in the rear * Front bumper in vehicle color * Daytime running lights * Door handles, black * Underride protection, rear, black * Lashing eyes * Immobilizer * Central/double locking with remote control ... and more ----The vehicle is in original condition! Rcedpfxszt Epbe Aireh Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, RS Simulators RS Simulators ST2K 1000 / 55 Temperature Shock Chamber Water-cooled The unit was regularly serviced and maintained by the manufacturer until it was decommissioned. For sale is a high-performance temperature shock test chamber, type ST2K 1000 / 55. The unit is ideal for standard-compliant thermal shock tests in accordance with DIN EN 60068-3-5, as well as for demanding material and component tests. With its two separate temperature chambers and automatic horizontal test basket transfer, this unit offers the perfect solution for reliability tests in industry, automotive, research and quality assurance. Key technical data: Temperature ranges Upper test chamber (hot chamber): +40 °C to +180 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Lower test chamber (cold chamber): –70 °C to +100 °C Time deviation: ±0.8 K (according to DIN 50011, empty chamber) Test basket transfer: Horizontal movement (automated) Fast changeover for temperature shock tests Test chamber / usable volume (Type ST2K 1000) Volume: approx. 580 liters Internal dimensions: Width approx. 1070 mm, Height approx. 680 mm, Depth approx. 800 mm Max. load: approx. 150 kg Power supply: Total power: max. 33 kVA Current consumption: max. 65 A Mains connection: 3 × 400 V / N / PE / 50 Hz Main power cable: 5 × 25 mm² Water & compressed air connections Cooling water inlet: G 1", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized, max. 22 °C Condensate drains: multiple (non-pressurized) Compressed air connection: quick-release coupling NW 7.2 (G 1/4"), min. 4 bar, max. 10.5 bar Dimensions & Weight: External dimensions: Width: approx. 2800 mm Height: approx. 2400 mm Depth: approx. 2200 mm Weight: approx. 2800 kg Equipment Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm width) Full-fledged changeover cabinet Observation window Internal lighting SE-604 control unit Program operation and data recording possible RS232 interface Other technical data Sound level: approx. 67 dB(A) at 1 m distance (free field) Refrigerant: R449A: approx. 8.0 kg (GWP 1397) R23: approx. 2.5 kg (GWP 14800) Permissible operating environment: Rcjdsy H Igfepfx Airjh Temperature: +12 °C to +30 °C Humidity: 25 %–75 % RH Operating hours approx. 4,500 hours For your security as a buyer, please note the following information! The following points will be carried out on our offered units in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (see pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Year of construction: 2006, condition: ready for operation (used), This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. • Base frame Rodpfx Aijx D If Torjch • Accessories for base frame • Hydraulic fittings • Unit carrier (left) TK420 • 108 bores • Pipe (coolant return) • Flange shaft with face gearing • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective hood • Form turning unit - material guide • Guide axis • Cover plates with empty stations • Milling unit with NC feed • Clamping with toothed belt pulley z1=16 • Toothed belt pulley Z1=16 • Toothed belt pulley Z2=20 • Toothed belt 25 AT10 / 730 • Hydraulic power unit 70 100 04358 32 dm³/min • Central lubrication • Deflection plate T - T Additional equipment • Part ejection console • Straightening and feed rollers • Clamping change parts station 1 • Tools and tool holders • Operating tools S6 • Ejector with gripper • Clamping jaws (plates) • Press-in unit for internal hexagon socket • Face turning head PCD 100-01-101 • Length control with pneumatic cylinder and laser • Reel support (Star cross) • Extension (coil height) • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) • 24-volt filling unit integrated with emergency stop valve • DA 300 compressed air maintenance system

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Rcodpfjzizmbsx Airoh Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, For sale is an automation cell from the brand EROWA, type Robot Dynamic 150 Linear (ERD 150L), including the process control system JMS 4.0 MoldLine. With the exception of the gantry eroding machine, all production and measuring machines have already been sold. Only the EROWA automation is offered; the Gantry Eagle 500 can be offered separately. The system was put into operation in mid-2020 and is in very good and well-maintained condition. Technical data: Year of construction: 2020 Control / control system: JMS 4.0 MoldLine from Certa Systems Magazine capacity (total): - 20 pallet spaces for PARTOOL clamping system - 360 spaces for EROWA ITS 50 Turret rotation radius: -30° to +300° Transfer weight max.: 150 kg Rodpsz Szh Nefx Airoch Identification system: EWIS 10 (ID chips) Loading station: Yes, with rotary table Safety enclosure: Yes, according to layout Acceptance: Complete CE acceptance Included in the offer: 3 gripper arms and grippers with RCS coupling, as well as RCS gripper S, support gripper for ITS 50, collection tray on the rotary turret, gripper station (Gripper Dock), software license for Robot Dynamic 150 L, machine interface box including interfaces, loading station, enclosure including all elements and doors, CMM - light curtain system. Note regarding tooling & coaching: The chucks, adapter pallets, vices, Partool tooling, and EROWA ITS holders are NOT included. Coaching by EROWA Automation is not included in the scope of delivery. Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices do not include VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: new, Year of construction: 2026, The WLTB300 Transport Trolley with a load capacity of 300 kg and a lifting height of 900 mm is designed for lifting and moving loads in workshops, warehouses, and production facilities. The mast structure with a lifting fork assembly enables components to be positioned for assembly, transportation, and transfer at workstations. Combining lifting functionality with a mobile chassis reduces the need for manually handling heavy components. Key Advantages of the WLTB300 300 kg Transport Trolley - Load capacity of 300 kg – enables the handling of machine parts, transport crates, and workshop equipment. - Lifting height of up to 900 mm – makes it easier to position loads at the required height for transfer or preparation for further operations. - Forks measuring 535 mm in length and 80 mm in width – provide two support points when picking up and lifting transported components. - Maximum fork spacing of 520 mm – allows the fork positions to be adjusted to the width and base structure of the load. - Large Ø250x60 mm wheels – facilitate manual transportation of the trolley between workstations. - Compact dimensions of 830x730x1240 mm – simplify workspace organisation and storage of the device. Mast Structure and Hydraulic Lifting Mechanism Rcsdpfx Asz Sy U Ujireh The WLTB300 lifting trolley features a hydraulic cylinder operating in conjunction with a chain system. The mechanism raises the fork carriage along the vertical mast guides, allowing the load support height to be adjusted. This design makes it possible to pick up components from a low level and position them for transfer at a workstation. The maximum lifting height of 900 mm expands the trolley's range of applications in assembly and maintenance operations. The operator can raise a component to a height suitable for the task being performed, reducing the need for manual lifting. The device supports material handling from the moment a load is picked up until it is delivered to its intended location. Adjustable Forks for Different Loads Each fork measures 535 mm in length and 80 mm in width. The ability to adjust the fork spacing up to 520 mm makes it easier to position the supports according to the base of a crate, component, or other transported item. The open space between the forks allows the operator to monitor their position when approaching a load, helping ensure accurate trolley positioning before lifting. Low Load Pickup Height The minimum lifting height is 100 mm. The low position of the lowered forks makes it easier to pick up items with sufficient ground clearance, including crates with feet and components placed on supports. This allows loads to be prepared efficiently for lifting without the need to manually transfer them onto a higher surface. Equipment and Structural Components - Mast with a vertically guided fork carriage. - Hydraulic lifting mechanism with a chain system. - Forks measuring 535 mm in length and 80 mm in width. - Chassis with large Ø250x60 mm wheels. - Handles for manually manoeuvring and positioning the trolley. Technical Specifications of the WLTB300 Transport Trolley Load capacity 300 kg Minimum lifting height 100 mm Maximum lifting height 900 mm Fork length 535 mm Maximum fork spacing 520 mm Fork width 80 mm Wheel size Ø250x60 mm Overall length 830 mm Overall width 730 mm Overall height 1240 mm Weight 53 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 605 mm, total height: 1,080 mm, total length: 350 mm, overall weight: 40 kg, warranty duration: 12 months, laser wavelength: 1,064 nm, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany Rodpfx Aisxuqxqeroch - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg Rjdpfx Aiewkpx Roroch

Condition: excellent (used), disassembly included in the price Rjdpfx Aijzvpxlerech air return duct fan motor power: 15 kW screw conveyor total lock 72 filter bags mechanical filter cleaning transfer fan for sawdust

Condition: used, mileage: 2,75,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight Rsdpfj Afrrwox Airsch * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Condition: new, functionality: fully functional, overall weight: 260 kg, volume flow: 65.3 m³/h, power: 22 kW (29.91 HP), GRUNDFOS NKE 40-250/255 stainless steel centrifugal pump – 22 kW – integrated VFD – new/unused New, unused Grundfos industrial centrifugal pump with integrated variable frequency drive. Complete assembly with motor, coupling, coupling guard and steel baseplate. Stainless steel pump casing and impeller, suitable for water transfer and various industrial pumping applications. Technical specifications: Rcjdpfx Ae Aaw Rhjireh Type: NKE 40-250/255 A2F2KE-SBQQE Product number: 97701889 Motor: Grundfos MGE, 22 kW Supply: three-phase 380–480 V, 50/60 Hz Nameplate duty point: 65.3 m³/h at 78 m head Speed at stated duty point: 2,940 rpm Nameplate pressure/temperature rating: 16 bar / 120 °C Stainless steel casing and impeller: EN 1.4408 Shaft seal: BQQE Motor efficiency: IE3, 92.7% Protection rating: IP55; insulation class F Control interface: PUMP I/O, GENI/RS485 Condition: new/unused surplus stock. Supplied as pictured.

Condition: used, mileage: 4,00,000 km, power: 184 kW (250.17 HP), first registration: 11/2011, fuel type: diesel, overall weight: 11,990 kg, emission class: euro5, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, tail-lift, MAN TGM 12.250 First registration: 11/2011 405,000 km Air conditioning Manual transmission Euro 5 Engine brake Leaf/air suspension Rjdpfxoyytmke Airech Tail lift Box body interior dimensions: L: 620 cm, W: 245 cm, H: 230 cm !!! PAYLOAD INCREASE TO 15 tons POSSIBLE !!!! Thermoking unit T800R !!!! RAILINGS !!!! for meat Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/?????/?????... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station

Condition: used, Thermo Scientific   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Rcsdpsziy D Ejfx Airjh Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance Meets Intelligence Future vehicle generations will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger volumes of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 lines (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FlexRay, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB and mobile network Operation via menu control Technical Data: GL5300 Configuration GL5350-8H-1R3L CAN Interfaces CAN 2.0 16 CAN FD 4 LIN Interfaces 5 RS-232 Interfaces 7 Analog Inputs 10 Bit 4 Operating Voltage +7 V … +50 V Power Consumption at 12 V: typ. 10.3 W Current Consumption at 12 V: in Sleep Mode < 2 mA in Half-Sleep Mode typ. 180 mA in Operation typ. 860 mA Operating Temperature Range -40 °C... +70 °C Housing: Material Side Profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Rodpfszg Tzrjx Airsch Decorative Strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2026, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V Rodpexd A I Ajfx Airoch - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Rcjdexuvk Eepfx Airoh - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, mileage: 78,811 km, power: 200 kW (271.92 HP), first registration: 07/2022, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space volume: 45 m³, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,500 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ATEGO 1527 L flatbed/tarpaulin 7.40 m with fifth wheel coupling * TARPAULIN with sliding cover on the right and left * Vehicle number for customer inquiries: 4728 * Engine version Euro VI, E * Active Brake Assist * Air conditioning * Lane keeping assist * Trailer coupling G 145, for fifth wheel coupling * Trailer coupling Ringfeder * Light sensor * Air suspension, rear axle * Air deflector, lockable * Rain sensor * Stability control assistant (ESP) * Auxiliary heater, hot air, 2000 W * Trailer brake, 2-line * Trailer socket 24 V, 15-pole * Electronic braking system with ABS and ASR * Driver's comfort suspension seat * Power windows, electric, on both sides * Gearbox G 140-8/9.30-0.79 * Weight variant 15.0 t (5.1/10.5) * Mercedes PowerShift 3 * Engine brake, standard system * Reversing warning, combined with hazard warning lights * Locking system, with central locking * External sun visor, transparent * Cruise control * Storage compartment, low, on the engine tunnel * AdBlue tank 25 l * Roof hatch/ventilation flap, roof * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Plastic tank 180 l, left * Engine OM936, R6, 7.7 l, 200 kW (272 hp), 1100 Nm * Crossmember, retrofitted installation of fifth wheel coupling G145 * Wheelbase 4760 mm * Tires tubeless, 285/70 R 19.5 front axle * Inline engine, 6 cylinders * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, under frame, rear axle Redpfxjzknilj Airoch * Front spring, 5.1 t, parabolic * Preparation for toll collection * Digital tachograph, 2nd generation, ADR * Environmental badge (green) * Two-seater * Service booklet maintained * 2/3-door No liability for printing and typographical errors Sales only to commercial customers Errors and prior sale reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We will be happy to provide you with a LEASING-FINANCING-RENTAL PURCHASE offer Guarantee insurance possible on request with the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plate for 30 days All customs documents for export are possible, but must be requested separately * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 6,59,000 km, power: 335 kW (455.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, emission class: euro5, Equipment: ABS, air conditioning, Actros MP3 3246 First registration: mileage Rcodpfxe Agqydj Aireh 8x4 Leaf/Leaf... full steel BIG AXLE EPS... 3 pedals Retarder Wheelbase 4500 Euro 5 Air conditioning Body: Roll-off system Hyvalift ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 EUR Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 88,500 km, power: 96 kW (130.52 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,300 kg, gearing type: mechanical, emission class: euro6, loading space length: 2,630 mm, loading space width: 1,780 mm, loading space height: 1,700 mm, Equipment: ABS, central locking, electronic stability program (ESP), Ducato Multijet 130 First registration: 07/2017 !!!! ONLY 88,600 km !!!!! !!! NEW TÜV (technical inspection) !!!!! Payload: 1400 kg Euro 6 Manual transmission Wheelbase: 3240 mm Cargo area: L: 263 cm, W: 178 cm, H: 170 cm Registered in Austria Delivery possible ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…? …?… Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our services for you: Rsdpj Agqyhjfx Airech - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 7,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, Classic Magic 500 TU6 -Double miter saw with program/positioning control -Electrically adjustable saw head, speed V = 20 m/min. -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 6,200 mm, automatically up to 10,000 mm in oversized cutting mode -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the saw head -Miter angle range from 90° to 22.5° (outward) -Saw heads with automatically controlled full protective guards -Profile support roller conveyor (right) -Pneumatic material/workpiece clamping The machine includes the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Long roller conveyor -Additional tensioner on the roller conveyor -Horizontal + Vertical clamps -Macro function (ideal for mosquito screen manufacturers) -Oversized cutting -Shortcut Rcodpfoz Adxtex Airjh -Crosscut -Automatic cut

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 21 mm, total width: 22 mm, space requirement height: 3,900 mm, The offer includes a warehouse platform of approximately 425 m2 from Topregal. Rcsdpfx Ajz E S H Ueireh Dimensions: approximately 21.3 / 19.7 m x 20.85 / 9.10 m Height to top of flooring: 3,880 mm Height to bottom of structure: 3,500 mm Load capacity: 350 kg / m2 Flooring: galvanized grating 30/19 H30/2 (499 m) Maximum usable load per support: 10,584 kg Maximum load per baseplate: 11.8 kg / cm2 Number of cross braces: 4 Pallet transfer area Accessories: 2 staircases with a 38° incline; total width 1,000 mm, usable width 840 mm 99 meters of railing; 1,100 mm height, including handrail and knee rail, as well as rolled edge Color: Supports, railing supports, staircase stringers: RAL7024 Railing tubes, main beams, secondary beams: sendzimir galvanized Stair treads: grating

Condition: used, mileage: 69,231 km, power: 260 kW (353.50 HP), first registration: 11/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, emission class: euro6, loading space length: 4,800 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, parking heater, Well-maintained Mercedes-Benz Arocs 1835 all-wheel drive tipper truck with a Meiller three-sided tipper body, payload of 8,075 kg, differential lock in the front and rear axles, air conditioning, auxiliary heater, manual transmission, tow hitch with 50 mm pin, high-performance engine brake, trailer tipping hydraulic connections, from first owner with only 69,231 km, and more. Equipment: M-cab Classic-Space with rear window Wheelbase 3,900 mm Heavy-duty series Weight variant 18.0 t (7.5/11.5) Unladen weight 9,925 kg Payload 8,075 kg Rcsdpfxs Agxz Rs Airoh Engine OM936 R6 7.7 l with 260 kW (354 hp) and 1,400 Nm torque Engine Euro 6 D Drive 4x4 Meiller 3-sided tipper, 4.80 m x 2.42 m, sideboard height 0.60 m Headboard 800 mm high Recessed tie-down points in the tipper bed Transmission G 141-9/14.57-1.0 Transfer case VG 3000-3W, 1.04 selectable Differential lock in the front and rear axles Front and rear axles with leaf springs Stabilizers on the front and rear axles Rear axle, bevel gear 300 planetary 13.4 t Front spring 7.5 t, rear springs 11.5 t Permissible front axle load 7,500 kg, permissible rear axle load 11,500 kg Axle ratio i = 4.143 Air conditioning Hot water auxiliary heater Electronic braking system with ABS and ASR ABS switchable High-performance engine brake Drum brakes Engine brake Cruise control Tow hitch, Ringfeder D50 with 50 mm pin with air pressure connections Permissible total weight 44,000 kg Trailer load with continuous braking system 35,000 kg Rear tipping hydraulic connections for tipping trailers Multifunction steering wheel LED daytime running lights Work lights Sun visor Retractable side sunblind in the cab on the driver's side Locking system with central locking Comfort locking system Multimedia radio with touch screen Electrically adjustable side mirrors and electric windows Driver and passenger comfort suspension seats with velour seat covers German vehicle from the first owner Very good and well-maintained condition The truck was regularly serviced at Mercedes Benz. Price NET, plus 19% VAT. We will be happy to provide you with attractive financing options. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2631

Condition: used, mileage: 1,30,232 km, power: 309 kW (420.12 HP), first registration: 07/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: white, gearing type: automatic, total length: 9,850 mm, total width: 2,550 mm, total height: 3,630 mm, loading space volume: 46 m³, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,430 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Scania P 420 B4x2LB Refrigerator Box Truck with Mitsubishi Unit VIN: 5731482 Chassis / Components: * Wheelbase: 5,350 mm * Full / Air Suspension * Tires: 315/70 R.22.5 * Remaining Tread Depth: Front ~40%, Rear ~60% * Snow Chains * Aluminum Diesel Tank 315 L * 1 x Ad-Blue Tank * 1 x PVC Storage Box * 2 x Fire Extinguisher Mount * LBW-Bär BC 2000 S4-C4, Load Capacity 2,000 kg Cab: * CP 17 N * Skylights / LED * 1 x Bunk * Leather Seats / Leather Steering Wheel * All-Around Camera, Side Camera * Automatic Climate Control * Auxiliary Climate Control * Scania Premium Infotainment * USB, AUX, BT * Navigation * Scania-AEB = Emergency Braking Assist * Scania ACC = Adaptive Cruise Control * Scania LDW = Lane Departure Warning Body: * Refrigerator Box * Refrigeration Unit: Mitsubishi TU8-S * Diesel, Standard, Electric, Standard * Mains Operation * Cargo Space: 7.60 m x 2.50 m x 2.43 m, approx. 46 m³ * LBW Bär BC 2000 S4-C4, 2-ton Load Capacity * Screen Printing / Wooden Floor * Interior Lighting Engine / Transmission: * 420 hp / 309 kW // 12,742 cc // Euro 6e * Opticruise / Automatic * Retarder * Differential Lock Weights: * Gross Vehicle Weight: 18,000 kg * Unladen Weight: 10,690 kg * Payload: 7,310 kg Other: * 1 Previous Owner * German Vehicle * MOT / Inspection due 01 / * New M-Service on 27.10.2026 at 130,153 km ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the delivery of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- Rodj Agxrhepfx Airech No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day license plates / Export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.