Used Transformer 315 Kva for sale (7,736)

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate Iedpfx Aleyz Dcfexeif

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets Iiedpfx Aloytg Rbjxjf - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 503 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 503 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, torque: 75 Nm, overall weight: 6,200 kg, spindle nose: A2-5, CNC Lathe NAKAMURA-TOME WT100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2012 CNC control: FANUC 31i-B Distance between spindles: 735 [mm] Max. cutting diameter: 190 [mm] Max. turning lenght: 503 [mm] Stroke Y axis: -31 / +31 [mm] Stroke Z1 axis: 503 [mm] Stroke X1 axis: 135 [mm] Stroke Z2 axis: 503 [mm] Stroke X2 axis: 135 [mm] Rapid traverse rate X1 axis: 16000 [mm/min] Rapid traverse rate X2 axis: 16000 [mm/min] Rapid traverse rate Z1 axis: 40000 [mm/min] Rapid traverse rate Z2 axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-5" Ijdozhvwlepfx Alxjif Max. bar diameter in turning spindle: 42 [mm] Spindle throughbore: 56 [mm] Max. spindle speed: 6000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter spindle nose: A2-5" Counter spindle throughbore: 56 [mm] Counter spindle stroke: 525 [mm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Counter spindle torque: 75.4 [Nm] Max. tool holder cross-section: 20 x 20 [mm] Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 55.2 [kVA] Supply voltage: 400 [V] Weight: 6200 [Kg] INCLUDED EQUIPMENT: x1 IEMCA BOSS 545 E Type 32 L bar feeder (3 m bar capacity) x1 SMW-AUTOBLOK Mario Pinto PPBE-42 A5 collet chuck (S1 spindle) x1 Collet chuck (S2 spindle) x4 Radial driven tool holders x2 Axial driven tool holders x16 Static tool holders x1 Foot pedal control for chuck open/close x1 Parts catcher on upper turret with conveyor belt x1 Chip conveyor x1 Automatic lubrication system x1 Three-color status indicator lamp x1 Transformer x1 USB memory stick for parameter backup Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: used, Year of construction: 2015, functionality: fully functional, Travel distances X-axis travel: 290 mm Z-axis travel: 560 mm W-axis travel: 640 mm Y-axis travel: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. swing diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feedrates Iiedpfjy Dgfbsx Alxsf X-axis feedrate: 24 m/min Z-axis feedrate: 30 m/min W-axis feedrate: 30 m/min Y-axis feedrate: 12 m/min Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Index time: 0.16 s Sub Spindle Sub spindle max. speed: 6,000 rpm Sub spindle torque: 70 Nm MACHINE DETAILS Electrical connection values: 66 kVA / 95 A / 400 V Pneumatic connection values: 7 bar / 150 l/min Weight: 7,000 kg Operating hours Power-on hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channels Chip conveyor Tool measurement arm (Tool Setter) Transformer Cooling unit Coolant tank Fixed and driven tool holders Replacement main spindle (unrefurbished) Various collet chucks, size 65 Documentation (circuit diagrams, operator's manual, etc.)

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Milling Spindle: Isdpfoyh Nm Sjx Alxjif Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Equipment & Features: High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. The upper arm is depth-adjustable and the lower arm is height-adjustable. Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm Iiodpfx Alow T Tlfsxef • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm • Height-adjustable lower arm • Steel frame • 400 V, 50 Hz

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Ijdpfxewu Tu Dj Alxsif Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Iedpfx Aljzul Utjxjif Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Engine: Deutz TBD 620 V12 Generator: Piller Power: 1400 KVA Iodpfx Aovmzwxjlxeif Frequency: 50 Hz Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Incl. control cabinet Incl. silencer

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA Iodju Nwx Ujpfx Alxoif weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! *

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,672 h, functionality: fully functional, machine/vehicle number: 0040000281C, turning length: 500 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,300 kg, controller model: Heidenhain Plus IT DinPlus/TurnPlus V7, TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke for cross slide: ±40 mm Spindle type: Integrated spindle motor ISM 52 Plus Drive power: 20/27 kW at 100/40 % duty cycle Spindle speed: 6,000 rpm Turret: 12-station disc turret Sauter Tool holder: VDI 30, DIN 69880-30 Tool drive: Connection/drive according to DIN 5480 MACHINE DETAILS Control system: Heidenhain Plus IT DinPlus/TurnPlus V7 Clamping system: Hydraulic collet chuck Draw tube inner diameter: 52 mm Measuring system: Direct measuring system Glass scale: X-axis Connection power: 25 kVA Rated current: max. 40 A Fuse: 44 A Mains voltage: 400 V Mains frequency: 50/60 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,300 kg Operating hours (according to counter) Spindle hours: 7,672 h 2nd counter: 22,936 h EQUIPMENT Isdpfx Ajztb Adjlxsif C-axis Hydraulic spindle brake Tailstock Chip conveyor with coolant system Connection nozzle for oil mist separator including electrical connection Coolant spray gun Separate speed limiting device for the main spindle for power chucks with predefined speeds below the maximum machine speed Documentation Tool case for disc turret Ø 30

Condition: like new (used), Year of construction: 2003, Dry three-phase distribution transformer - manufacturer ABB Brilon Germany, type Resibloc, 1000kVA, 10/0.4kV, IP00, uk=6%, Dyn1, Cu / Al winding, standard losses, used very briefly, fully functional. Iiedpezt Nwpefx Alxof

Condition: used, functionality: fully functional, Floating grabber excavator plant, complete with floating conveyor belt Isdpfx Ajzkmmvelxoif Manufacturer: Rohr Bagger GmbH Type: RS 8.0/280-G Base year of construction: 1992 Grabber capacity: 8 m³ Crawler undercarriage with lifting mechanism and counterweights Hydraulic grabber Raking grate with oversized material slide Oscillating feeder Dewatering screen, Svedala, year of construction 1998, type H2PP 6000 x 2500 Excavator discharge conveyor, Bleichert Rohr, year of construction 1996, type TRV 9.1/1000 Transformer station Schneider, year of construction 1996, type TS 61440, 800 kVA Floating conveyor belt system Year of construction: 1992 Total length approx. 250 m, belt width 800 mm Barge / oversized material barge, year of construction 2005, 15 m x 5 m x 2.75 m, loading volume 40 m³, approx. 45 t.

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Ijdpfxjzvhz Ee Alxsif Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Iiodpfxsymcpyj Alxef Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: repair required (used), Year of construction: 2006, functionality: not functional, turning diameter: 450 mm, travel distance X-axis: 303 mm, travel distance Z-axis: 1,160 mm, overall weight: 10,000 kg, swing diameter over bed slide: 700 mm, controller model: Siemens 810D ShopTurn, Note: The main drive motor is currently not functional; an inspection and/or repair is required. Iijdpfx Alszt Sbksxef TECHNICAL DETAILS Maximum turning diameter: 450 mm Swinging diameter over bed: 700 mm Swinging diameter over cross slide: 500 mm Maximum workpiece length: 1,100 mm X-axis travel: 303 mm Z-axis travel: 1,160 mm C-axis resolution: 0.001° Spindle speed max.: 3,500 rpm Distance between centers: 1,230 mm Chuck diameter: 315 mm Bore in draw tube: 95 mm MACHINE DETAILS Control: Siemens 810D ShopTurn Total weight: approx. 10,000 kg EQUIPMENT C-axis Tailstock Steady rest Hollow chuck cylinder Chip conveyor Extraction system

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW Isdpfx Aeuntmdolxsif max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Isdpfx Aozmy Avslxeif

Condition: excellent (used), RMS Vibrations Testing System SW 8100/1 Manufacturer: RMS Type: SW 8100/1 Machine Type: Electro-dynamic Vibration and Shock Testing System Design: With sliding table, head expander and amplifier For sale is a used electro-dynamic vibration and shock testing system from the manufacturer RMS. The system is suitable for vibration, shock and fatigue testing in the areas of development, quality assurance, Iiedpfxjzd T Rho Alxef research, material testing and product testing. Technical Data Sinusoidal Force: 24 kN Random Force: 20 kN Shock Force: 28 kN Displacement: 1.5" Armature Stroke: ±22 mm Armature Diameter: 284 mm Thread: M10 Max. Acceleration: 130 g Acceleration at 60 kg payload: 30 g Frequency Range: 5 - 3000 Hz Weight Compensation: up to 500 kg Total Connected Power: approx. 35 kVA Required Cooling Water: optimally 15 °C - 20 °C Water Flow Rate: approx. 25 l/min Water Pressure: approx. 3 bar Compressed Air: 6 bar for weight compensation and center suspension Total Weight: approx. 3,500 kg Equipment Vibration Exciter SW 8100/1 Sliding Table Digital Amplifier Control Cabinet with Water Cooling Connection Box / Fuse Box Head Expander made of Magnesium Angle for Sample Mounting / Horizontal Shock Testing Water-Cooled System Head Expander / Test Table Head Expander Weight: approx. 50 kg Mounting Surface Head Expander: 800 x 700 mm Grid: 50 x 50 mm Thread: M8 Angle for Sample Mounting: approx. 25 kg Mounting Surface Angle: 230 x 230 mm Thread: M8 Suitable for use in high-performance horizontal shocks Modernization / Expansion 2021 The system was expanded in 2021 to achieve higher performance levels. The water cooling system was expanded with an additional plate heat exchanger for better heat dissipation to the cooling water. The main transformer for the digital amplifier was replaced. The power was increased from 15 kW to 24 kW. The voltage was increased from 92 V to 120 V. The capacitor bank was expanded to achieve better shock performance. The weight compensation was renewed. Scope of Delivery 1x Connection Box / Fuse Box 2x Control Cabinet, Water Cooling and Amplifier, approx. 250 kg each 1x Shaker / Vibration Exciter, approx. 2,200 kg 1x Sliding Table, approx. 450 kg 1x Head Expander, approx. 50 kg 1x Angle for Test Specimen Mounting / Horizontal Shocks, approx. 25 kg Condition Used Amplifier Serviced New Main Transformer New Capacitors Capacitor Bank Enlarged Water Cooling Optimized with Additional Plate Heat Exchanger Weight Compensation Renewed Optical Condition according to Pictures Sale from our location. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: like new (used), Manufacturer: FANUC Corporation Model: FF4000i-A Machine type: Fiber laser Laser power: 4 kW Laser technology: Fiber laser Manufacture date: June 2016 Power supply: 200 V / 220 V Frequency: 50 / 60 Hz Rated power: 28 kVA Rated current: 16 A Short-circuit current: 5 kA Country of Manufacture: Japan Accessories: Transformer FANUC LX80L-0003-0611 Transformer power: 30 kVA Primary voltage transformer: 400 V ±5 % Ijdpfjyt Db Dox Alxeif Secondary voltage transformer: 200 V Transformer frequency: 50 / 60 Hz Transformer weight: 125 kg Standard: EN61558-2-13 Scope of delivery: Laser source, transformer, two fiber optic cables Location: Fulda The laser has only been used as a demonstration unit at a trade fair in 2018, therefore very few operating hours.

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Ijdpsyucguefx Alxeif Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: used, Year of construction: 2003, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 125 Nm tool taper MAS BT 40 swivellable B: 103 ° Iiodpevn Utcjfx Alxjf feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm rotary table dia. 600 mm number of T-slots 8 / 1 T-slot - width 14 H12 / 14 H7 T-slot - distance 63 mm max. table loading capacity 350 kg rotatable C: 360 ° Tool-Presetter: number of toolpositions 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 315 mm max. tool weight 8 kg total wight max. 100 kg total power requirement 26 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 4,0 x 4,0 x 3,0 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 T - 5-Axis - controled NC-Swivel-Milling-Head ( B-Axis ) - Rotary Table integrated in Working-Table ( C-Axis )

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Main spindle: Iiedpjvn Ur Sefx Alxef turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 kW Torque 130 Nm tool taper BT 40 DIN 69872 work table: table surface area 1.250 x 700 mm max. table load ca. 500 kg table diameter 700 mm T-slots 11x 14 x 63 mm max. table speed 15 min/-1 tool magazin: number of toolpositions 32 (2x 16) pos. tool taper BT 40 max. tool diameter 80 / 130 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg feeds: feed speeds 20 - 15.000 mm/min rapid traverse 12 m/min total power requirement 30 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 4,0 x 3,0 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - 5-Axis - Rotary table in Fixed-Table - Retrofitting to SK 40 optionally possible!

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° Ijdeyackdepfx Alxsif table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: repair required (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 195913-0, overall weight: 1,700 kg, The transformer has a slight oil leak at two fins. Iodpoztnkbjfx Alxjif