Used Traub A 25 for sale (102)

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm Bwedpfx Aj Afg Tcefiow LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Year of construction: 2003, condition: used, Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible. Bwjdpfxo Ahq Raj Afijw

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Bedpoz Ng I Aefx Afieww Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Bwedpfx Afez Erdtoisw Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: ready for operation (used), Year of construction: 2012, operating hours: 19,295 h, spindle motor power: 10,700 W, spindle speed (max.): 8,000 rpm, overall weight: 6,000 kg, total width: 2,500 mm, total height: 2,600 mm, bar diameter (max.): 32 mm, travel distance X-axis: 140 mm, controller manufacturer: TRAUB, controller model: TX 8i-p, product length (max.): 4,500 mm, number of axes: 7, This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details. • Number of Turrets: 2 • Maximum Z-Axis Travel: 305 mm • Main Spindle Torque: 21 / 32 Nm • Main Spindle C-Axis Resolution: 0.001° • Turret 1 Tool Stations: 10 • Turret 1 Live Tool Stations: 10 • Turret 1 Live Tool Speed: 12,000 rpm • Turret 1 Live Tool Power: 1.5 / 2.5 kW • Turret 1 Tool Holder Diameter: 45 mm • Turret 1 Turning Tool Shank: 16 x 16 mm • Turret 1 X-Axis Travel: 140 mm • Turret 1 Z-Axis Travel: 305 mm • Turret 1 H-Axis Resolution: 0.001° • Turret 1 Chip-to-Chip Time: 0.3 sec • Turret 2 Tool Stations: 9 • Turret 2 Live Tool Stations: 9 • Turret 2 Live Tool Speed: 12,000 rpm • Turret 2 Live Tool Power: 1.5 / 2.5 kW • Turret 2 Tool Holder Diameter: 45 mm • Turret 2 Turning Tool Shank: 16 x 16 mm • Turret 2 X-Axis Travel: 140 mm • Turret 2 Y-Axis Travel: -25 / +40 mm • Turret 2 Z-Axis Travel: 320 mm • Turret 2 Chip-to-Chip Time: 0.3 sec • Counter Spindle Speed: 8,000 rpm • Counter Spindle Power: 1.5 / 2.5 kW • Counter Spindle Torque: 4.5 / 7.7 Nm • Counter Spindle C-Axis Resolution: 0.001° • Maximum Clamping Length: 250 mm • Maximum Bar Diameter (Counter Spindle): 32 mm • Back Working Tool Stations: 8 • Back Working Live Tool Stations: 3 • Back Working Live Tool Speed: 12,000 rpm • Back Working Live Tool Power: 1.5 / 2.5 kW • Back Working Tool Holder Diameter: 36 mm • Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min • Maximum Feed Rate: 20,000 mm/min • Total Power Requirement: 46 kW • Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm • Chip Conveyor: Optional, not included • Coolant System: Yes • Tool Turrets: 2 • Back Working Unit: Yes Bwsdpozcyhxjfx Afisw • Bar Feeder Interface: Yes • Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m • Electronic Handwheel: Yes • Hydraulic Unit: YesMachine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective. Technical Specification Counter Spindle Yes Driven Tools Yes Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 7, This 7-axis TRAUB TNL 32 7B swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 7Bswiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system not included, it is currently connected to a central one • Extraction: Connection D 150 mm for central extraction Additional equipment Bsdpfxex D Drcj Afisww • bar feeder • 7B Version Technical Specification Counter Spindle No

Condition: used, Year of construction: 2016, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2016 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):35 kW Torque (max.):120 Nm Barcapacity:65 mm Bwedpfjz A Nz Djx Afijw Workpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motor spindle, integrated in tool carrier II Speed:7.000 rpm :Power (max.):12 kW Torque (max.):22,5 Nm Chuck:Hainbuch Spanntop Kombi Axfix Gr. 42 Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Toolcarrier II (X/Y/Z): Technology:Turret with 9 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Backworking attachment: Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron) Driven Tools:5 stations Tooldrive:12.000 U/min, 6,7 kW, 5,3 Nm Equipment/Accessory: Positionsensor:Direct Scales in X (up/down) Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbaletfilter and High-pressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Wasteheatmanagement:Interface for external chiller prepared Rawmaterialfeed:Barloader, FMB SL 80 V Finished part removal:Unloading device (NC-controlled) with coneyor belt Fireextinguishing unit:Kraft + Bauer Oilmistseparation:Electrostatic extraction LTA AC 3001 Further Accessory:Misc. used static and driven Toolholder

Condition: good (used), Year of construction: 1999, operating hours: 1,10,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Bjdjx A Ha Hspfx Afijww

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Bjdpszkvkqsfx Afijww

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Bodpfx Aezr Dd Usfisww Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Bwodpfozacwdex Afiow Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: used, Year of construction: 2007, spindle passage 65 mm Max. Turning length 450 mm Spindle diameter in forward position 110 mm control System - TX8 I number of spindle speeds 4.000 U/min Bedpszyvb Uofx Afisww CNC lathe | TRAUB - TNC 42/65 equipped with bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, spindle speed (max.): 5,600 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 520 mm, spindle motor power: 18,500 W, type of input current: three-phase, overall weight: 5,600 kg, bar passage: 42 mm, input current: 85 A, number of tool turrets: 2, number of tool stations in tool turret 1: 14, number of driven tool stations in tool turret 1: 14, number of tool stations in tool turret 2: 14, number of driven tool stations in tool turret 2: 14, CNC Lathe TRAUB TNC 42/65 Bwedjzh D Aiepfx Afiow TECHNICAL CHARACTERISTICS: Year of manufacturing: 2009 CNC control: TRAUB TX8i Number of axes: 8 Stroke Y axis: +/- 35 [mm] Stroke Z1 axis: 450 [mm] Stroke X1 axis: 140 [mm] Stroke Z2 axis: 520 [mm] Stroke X2 axis: 140 [mm] Stroke E axis: 450 [mm] Spindle throughbore: 42 [mm] Max. spindle speed: 5600 [rpm] Increment C-axis: 0.001 [°] Spindle power: 18.5 [kW] Counter spindle throughbore: 42 [mm] Max. counter spindle speed: 5600 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Type of tool holders: VDI 30 Number of tool stations - Turret 1: 14 Number of tool stations driven - Turret 1: 14 Max. speed driven tools - Turret 1: 4000 [rpm] Number of tool stations - Turret 2: 14 Number of tool stations driven - Turret 2: 14 Max. speed driven tools - Turret 2: 4000 [rpm] Total power required: 107 [kVA] Rated current: 85 [A] Supply voltage: 400 [V] Weight: 5600 [Kg] INCLUDED EQUIPMENT: x1 Set of collets x1 Set of tool holders x1 Chip conveyor x1 IRCO PROFIMAT ECO 42.6 bar feeder x1 KNOLL coolant system Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Bsdpfxjzuzzvo Afioww

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Manufacturer: Traub Model: TK 42 Bwodpfjzz Iylex Afijw Year of manufacture: 1986 With tailstock Spindle gearhead Chip conveyor Part conveyor The machine can be inspected while powered on. For an additional charge, a bar feeder can be supplied.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 Bedpfx Ajz Eqmtefisww C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Very good condition, fully functional. Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Scrapers and belts have been checked and replaced. The machine can be inspected while powered on.

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Control system: TX8i with Traub tool monitoring Main spindle: - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle Bsdpfxez Aqkcs Afioww - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system

Year of construction: 2003, condition: used, Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible. Bedpfxjzuzz Ao Afieww

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. Bedpfxezfkbae Afieww The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwedpfxozxihfs Afijw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bodpfxozxihrj Afisww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bedpezxiguofx Afijww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwodezxig Iopfx Afijw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwjdpfezxihxox Afiow

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bodpfx Aszxigzofijww