Used Traub A 25 for sale (94)

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions Rcjdpfx Ajuhav Dsaboh - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,232 h, functionality: fully functional, machine/vehicle number: 317, turning length: 1,000 mm, turning diameter: 680 mm, spindle motor power: 60,000 W, spindle speed (max.): 2,800 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 680 mm Spindle motor power: 60,000 W Max. spindle speed: 2,800 rpm MACHINE DETAILS Control model: TX 8H Electrical Data Operating voltage: 400 V 3~ Control voltage: 24 V ~ Solenoid voltage: 24 V – Clutch voltage: 24 V – Total power: 60 kW Total current: 100 A Spindle operating hours: 22,232 hours Rjdjw Rp Svepfx Aabjch EQUIPMENT Documentation/Manual Continuously adjustable speed Chip conveyor RUEZ SFWW2 Oil separator Tool holder VDI40 Comprehensive documentation Note: Dismantling and loading can be supported with personnel and crane facility.

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Rjdpfjwmqx Djx Aaboch

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm Rjdpfx Ajt Hwq Doaboch control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning and milling machine - TX8 D control - Complete technical data see photos - Year of manufacture: 1994 Rcjdpfxew D Df Es Aabsh - Hydrobar bar feeder magazine - Various driven tool holders - Tool holder - Three-jaw chuck - Complete documentation Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2005, operating hours: 60,764 h, functionality: fully functional, machine/vehicle number: 6030637, The machine is in good, ready-to-use condition and can currently be inspected under power. Disassembly and removal of the machine are the buyer’s responsibility. The machine features 2 turrets, each with 12 tool stations, all of which are driven. There is also a front station with 5 tool positions, 4 of them driven, as well as a rear station with 5 tool positions, 4 of them driven. The main spindle clamping system is a Hainbuch 32; the sub-spindle features an Axfix clamping system from Hainbuch. Various basic tool holders are included. Rjdpfew N Rziox Aabsch

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12.7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12.7 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] Rsdpfx Aaeuhaw Usboch - Y stroke : -9.5/+28 [mm] - Z stroke : 48 [mm] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/79.5 [mm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] - X/Z stroke : 415/138.5 [mm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Traub TX8i - Rotating guide bush - Coolant tank - Bar loader : FMB Minimag

Year of construction: 1978, condition: used, Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Redpfx Aajl Rmqtjbsch Bar automat Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 1983, condition: ready for operation (used), Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible. Rcedpfxowzld Do Aabjh

Condition: good (used), Year of construction: 2000, Traub TNL12/7 Spindle passage 12.7mm Turning length 130mm Main spindle 4kW; oś C 0.001 grad; 12.000 rpm Revolver 1 - axis X1 Y1, 6 tools, driven tools 1.5kW Rodpfxjpuilvo Aaboch Revolver 2 - axis X1 Z2, 6 tools, driven tools 1.5kW Subspindle 2.5kW; axis C 0.001 grad; 12.000 rpm Frontaparat - axis Z3; Z4/X3, driven tools Backparat - axis X4, driven tools 1.5kW Barfeeder FMB Minimag For sale 2 machines, a lot of accesories and toolholders. Machines under power, in production. 1. TNL12/7 s/n: 248 b/y: 2000, (7 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 +2x C axis) + FMB Minimag + Knoll swarf conveyor 2. TNL12/7 s/n: 277 b/y: 2000, full option (9 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 X4, Z4 +2xoś C axis) + IEMCA Genius + Knoll swarf conveyor

Condition: good (used), Year of construction: 1999, operating hours: 86,157 h, The machine was built in 1999 and underwent an 8,000-hour maintenance last year. Total operating hours: 86,157 hours. Turret 1 has 14 stations (with Y-axis) Turret 2 has 10 stations (without Y-axis) Rjdswur N Tspfx Aabsch

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Rcjdjtrvzxopfx Aabjh Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12.7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12.7 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] - Y stroke : -9.5/+28 [mm] - Z stroke : 48 [mm] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/79.5 [mm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] - X/Z stroke : 415/138.5 [mm] SECONDARY OPERATION Rodouhaxfspfx Aabjch - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Traub TX8i - Rotating guide bush - Coolant tank - Bar loader : LNS TRYTON HYBRID

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 5318, spindle bore: 26 mm, spindle speed (max.): 4,750 rpm, TECHNICAL DETAILS Max round diameter: 26 mm Max square size: 18 mm Max hexagon size: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 – 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length L -- R: 1,800 mm Width F -- B: 1,000 mm Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Rcjdjwtq Urspfx Aabjh Operating voltage: 380 V 50 Hz

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Rodpfx Aev Scrhoabech

Condition: used, Year of construction: 1983, functionality: limited functionality, turning diameter over cross slide: 160 mm, turning length: 800 mm, spindle bore: 60 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 810 mm, rapid traverse Z-axis: 10,000 m/min, rotational speed (max.): 3,150 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 3,300 mm, swing diameter over cross slide: 160 mm, turning diameter over bed slide: 360 mm, overall weight: 3,100 kg, Technical details: TRAUB TND 360 (1983) Rotation diameter over bed: 360 mm Rotation diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal stroke (z axis): 810 mm Axial stroke (x axis): 205 mm Control: TX-8 Spindle clearance: 60 mm Speed: 63 - 3150 / 2 steps rev. Feed:: 10,000 mm/min. Turret head - number of stations: 8 Tailstock holder ISO: SK30 DIN 2080 Rsdpfx Aowm Dhxsabsch Tailstock quill stroke: 105 mm Working pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 tons Machine dimensions approx. L x W x H: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment Lathe chuck Ø 200 mm (without jaws), hydraulic

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rcsdswuddvjpfx Aabsh Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Rodpfx Aaevldx Ajbjch Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 12.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 Rodpfsuhawzjx Aabech - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Set of spare parts

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, turning length: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Spindle bore: 42 mm Tool holder: 4 slots MACHINE DETAILS Rodpjwtq Ufofx Aabech Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm

Year of construction: 1993, condition: ready for operation (used), A Traub universal CNC lathe is available. Swing diameter over bed/slide: 400mm/360mm, turning diameter maximum/normal: 360mm/320mm, max. turning length: 1000mm, center distance: 2000mm, chuck diameter: 315mm. Spindle bearing diameter: 160mm, spindle bore: 80mm, speed: 4000rpm, power: 26kW, tool positions: 14, travel X/Z: 180mm/1000mm, feed: 24mm/rev, rapid traverse X/Z: 1000mm/1500mm/min. Quill diameter: 100mm, quill stroke: 200mm. Machine dimensions X/Y/Z: approx. 5800mm/2400mm/2400mm, weight: approx. 7200kg, control: Traub System TX-8-D. Documentation available. On-site inspection is possible. Rjdpfx Aewrrq Ejabech

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] Rsdpfx Asuhawuoabech END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Tool presetter

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Rcsdov Scrbepfx Aaboh

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 12 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 24 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 175 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 28 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] UPPER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] Rcjdpfx Aeuhadzsabjh - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 95 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.450 x 2.318 [mm] - Machine height : 2.258 [mm] - Machine weight : 10.000 [kg] MACHINE HOURS - Number of working hours : 50000 [h] EQUIPMENT - CNC : Traub TX8i-S - Electronic handwheel - 3 colors status lamp - Coolant tank : RESY * with high-pressure pump * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 6 - Number of fixed tool holders : 33 - Collet chuck : 2 HAINBUCH

Year of construction: 1994, operating hours: 38,274 h, condition: ready for operation (used), Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible. Rjdpfxsq A S Due Aaboch