Used Travelling Head Cutter for sale (19,447)

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, corner milling cutter -Type: M680 239.69.058 Ø160 -Number of teeth: 12, without indexable inserts -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160x 60 mm Tedpfxsu Ric Uo Abtjb -Weight: 3.4 kg

Condition: used, functionality: fully functional, Year of construction: 2000, machine/vehicle number: 201381, load capacity: 10,000 kg, Kuli overhead crane / workshop crane 10t – gauge 19,120 mm – year of manufacture 2000 For sale by auction For sale is a used Kuli overhead crane / workshop crane in good, immediately operational condition. The crane is ideally suited for production halls, workshops, steel construction, or industrial applications. Todpjy Tlf Sjfx Abtsb Technical data Manufacturer: Kuli Type: Overhead crane / workshop crane Year of manufacture: 2000 Load capacity / lifting capacity: 10,000 kg (10 t) Gauge: 19,120 mm Overall dimensions including end trucks: approx. 19,360 mm Control: Floor control Overall height from top of crane to hook: approx. 1,600 mm Lifting height of hoist: approx. 5,240 mm Condition The crane is in good used condition and was in operation until recently. Inspection under power is possible by arrangement. Dismantling / Availability The crane will be dismantled in week 27. Until then, the system can be inspected on site. Location AQUAtec Master in Metal GmbH Note Loading and transport by arrangement. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2008, overall weight: 1,20,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Todpfx Absxmf R Sotjb Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, Secodex face milling cutter head shoulder milling cutter Tedpeu Tytmefx Abteb -Type: R290-160Q40-12M 848471 -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 160 x 60 mm -Weight: 3.9 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 -Type: Ø 140 mm -Number of teeth: 12, without indexable inserts Tsdjval Rvspfx Abtjb -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.0 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, face milling cutter SK50 -Type: M100 239.10.220 Ø80 41005 -Number of teeth: 6 Tedpfxsvahcue Abtsb -Dimensions: 95/90/H230 mm -Weight: 4.0 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm -Weight: 38.5 kg Todezqzqcopfx Abteb

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, cutter, circle cutter Tsdpfx Asx H Rwtsbtjb -Manufacturer: Marchner, die cutter, boring head, circle cutter -Recording: MK3 -Diameter range: 33 - 85 mm -Transport dimensions: 340/165/H100 mm -Weight: 5.3 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 Tedpfx Asd Hui Nsbtjb -Manufacturer: Kelch -1x SK50 shank for end mill: Ø 40 mm -Weight: 18 kg

Condition: good (used), Double side corner cutter Todpeztpbbefx Abtob Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide Tjdpfxsb A Ihde Abtsb -Recording: SK50 -Weight: 4.5 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 Tsdpfxsb A H Ihs Abteb -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, Jobs Jomach 241, Year of manufacture 1999, Todpozxxcxjfx Abteb Siemens 840 D control system, Travel range X/Y/Z 3400/2500/1250 mm, 16-position tool changer, ISO 50 spindle connection, Table size 3000 x 1500 mm, Distance between columns 2200 mm, Swivel head, 2 x tilting head, Tool magazine, 2 x swivel-rotating head, Tailstock without head, 3 A steady rest.

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 510 rpm, table length: 457 mm, table width: 457 mm, overall weight: 1,200 kg, Kearns ‘S’ Type Horizontal Borer Todpfx Aszv T Dlsbtob Table Size 457 x 457mm Long Travel: 610mm Cross Travel: 305mm Vertical Travel: 286mm Facing Head Diameter: 250mm Spindle Speeds (6 off): 45 - 510 RPM

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter Todpfsb A Hg Hox Abtob -Diameter: 130 mm -Number of teeth: 10 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter Tedpfxob A Nure Abteb -Diameter: 125 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 Tjdpfx Abeb E S I Tetjb -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm -Weight: 19 kg

Condition: new, Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 9 -without indexable inserts: Carbide -Hole: Ø 40 mm -Number: 2x milling cutters available Price: per piece -Dimensions: -Weight: 2.6 kg Tjdpeb Iwq Rjfx Abtob

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 Tjdpfx Abjb A Rk Ijtob - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer Tjdsw Syv Uopfx Abtjb ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Operating hours: 4261 h

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Tsdpfx Abewu Nw Ueteb Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Todpfx Abjzcyrwsteb Perfect for auto recyclers, for cutting catalytic converters, etc. The shears are brand new, manufactured in 2024, but have never been used. Includes a complete service kit.

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Todszw Ragopfx Abtsb Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: excellent (used), *UNIVERSAL AVYAC AU GRINDER - With R. VASSAL variable speed drive* Universal AVYAC AU grinder, pedestal model, French made. Cross table, adjustable grinding wheel head, tool holder, electronic variable speed drive by R. VASSAL (right/left rotation + speed adjustment). Tsdpfx Abezxhggotsb For sharpening milling cutters, drills, reamers, and tools. 380V Three-phase – In good condition. Video available upon request.

Condition: used, Year of construction: 2004, functionality: fully functional, Special price, as the machine needs to be removed by August 28th. Special Price, contact us! Control system: - HEIDENHAIN iTNC530 Travel distances of linear axes: - X-axis: 2,700 mm - Y-axis: 1,000 mm (cross axis) - Z-axis: 1,050 mm Machine table: Tjdpfezu Nn Rjx Abtjb - Dimensions: 3300x1,000 mm - T-slots: 7 x 22 - Capacity: max. Axis speeds: - Max. feed rate X/Y/Z: 10,000 mm/min Milling head and spindle: - 2-axis diagonal milling head 1° x 2.5° - Max. spindle speed: 60 - 3,000 min-1 - Max. motor power: 22/30 kW - Tool holder: ISO 50 (DIN69872-B) Cooling and chip removal: - Chain conveyor in the longitudinal direction - Cooling through the spindle, 19 bar Other equipment features: - Movable control panel in front of the machine - Enclosure with front-side doors - Machine documentation