Used Die Cutting for sale (18,149)

Condition: ready for operation (used), size 52x72 Ksdpexzhdwjfx Adwsll

Condition: ready for operation (used), Year of construction: 2006, size 74x102cm Kodpfx Ajxzhb Asdwoll

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Kedpjvv R H Uefx Adwjll Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Kledpfxsp H Swds Adwol Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: new, Brand New - One Year Warranty Max. die cutting size Kedpfx Aovv R Hzjdwell 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames Klodpfx Aewypp Iodwjl - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Kledpfx Adswhvq Iewsl Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Kjdpfx Aox N Dymodwsll Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: ready for operation (used), Year of construction: 1994, Max format 103x72 cm min format 40x35 cm max speed 8000 per hour cutting force 250 t Quick lock frame Micrometric Stripping Unit with Quick lock upper chase and lower chase Tools, Manuals and Accessories Non-stop in feeder + delivery Stream feeder Kjdpfx Adsx S Hl Rewsll

Condition: used, Year of construction: 2000, functionality: fully functional, Kerma TS 3E Die Cutting Press, completely overhauled in 2000. Die cutting area 850x1250 mm / Clamping frame size 800x1200 mm. Quick-clamping frame. Safety infeed and outfeed tables. Max. pressing force: 240 t. Dimensions: 2500 x 2000 x 1650 mm. Power: 7.5 kW. Klodpfxox Anvps Adwsl

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Kljdpfx Adjx R R R Uowsl

Condition: ready for operation (used), functionality: fully functional, Machinery for the production of structural packaging. Includes a die-cutter H-142, year 1986, size 900x1400 mm + box maker, manufacturer Pack Projekt, year unknown – purchased in 2009 – feed width 1450 mm – additional creasing bar for vertical creases – slitting blade 350 mm + gluing machine for self-adhesive tapes including silicone tape dispenser and tear-open thread – feed width 1400 mm – year 2010 – hot melt glue system. All machines are used. Ready for operation and functional. SEE PICTURES AND DOCUMENTS Kjdpfx Aeyan I Iedwjll

Condition: good (used), Year of construction: 1997, Die cutting press, make Drössert Size: 100x140 Year of manufacture: 1997 Klodpfjya Hf Sox Adwol

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 2" inch -5x Cutting tips: 3/4" 1" 1 1/4" 1 1/2" 2" inch Klodpfxsc T Nx Io Adwol -2x Threaded ratchets: Type 111-R/12-R -Price/Sale: complete -Weight: 12.8 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm Klsdjc Uldrspfx Adwjl -Weight: 71 kg

Condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg Kodpfob A I H Rex Adwsll

Condition: excellent (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Kodpfx Adeb A Hl Rowjll Article No.: 296 566 -Weight: 170 kg

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 1 1/4" inch -4x cutting tips: 1/2" 3/4" 1" 1 1/4" inch -Number: 1 set available Ksdpfxsc Txarj Adwsll - Price: per set -Dimensions: -Weight: 6.6 kg

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Kledpfxsxyl Evs Adwol

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Kedpfx Ajlyqrcedwjll Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Maximum number of strokes per hours 8.000 sh h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Corrugated board up to a maximum thickness of 3 mm Kedelyqpdopfx Adwjll Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Ksdpfxolyp Emo Adwsll Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Kedpewxtb Ssfx Adwjll Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Kljdpfxoxx Hyre Adwol Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication Klsdpfowxtcpex Adwsl – safety guards – operating tools – sheet metal for pressure