Used Tray Erecting Machine for sale (71,116)

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm Iedpfx Aiszuxn Toysbb ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Ibjdpfxjzg D I Aj Aiysb NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ijdpszt Ni Eefx Aiysbb Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: used, Straightening machine, strip straightener with adjustable geared motor LENZE Straightening machine, strip tensioner used for cardboard approx. 350 x 1.5 mm Not suitable for use as a conventional straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, infinitely variable Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 Motor power: 0.37 kW Mains connection: 380 volts, 50 Hz - Traction roller pair, drive of the lower rubberized roller via open gear drive - Speed control via infinitely variable speed adjustment using a handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit are not driven) Ibjdsdzp U Aopfx Aiyjb - On a stable metal base - Straightening machine used for cardboard approx. 350 x 1.5 mm Space requirement L x W x H: 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Iodpfszav D Djx Aiyebb Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, sheet width 300 mm coil weight 400 kg coil internal dia. 240 - 640 mm coil outside dia. 1000 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Double decoiler, type MSD 18 (machine no. 18791): Bandwidth: 300 m Iodpfxopflpte Aiyebb Spool weight: 400kg Coil outer diameter: 1000 mm Coil inner diameter: 240 - 680 mm Straightening machine, type MR17S60M (machine no. 18591): Bandwidth: 100mm Band thickness: 0.2 - 1 mm

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Ijdpfx Aijya H Nkoyobb Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Iedpezz Hg Rjfx Aiysbb Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: as good as new (ex-display), Year of construction: 2023, tool height: 200 mm, bending angle (max.): 180 °, pressing force: 42 t, sheet thickness (max.): 30 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420 CNC Horizontal bending machine, with Siemens controler Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2023 incl. hand and foot pedal Horizontalbendingmachine as good as new Iedsgqflqjpfx Aiyebb Please contact us for more information for this horizontal bender.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Ibsdpfezf Nk Tsx Aiyob Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser Ibjdpfxozy N Sys Aiysb

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Iodpfx Aezy N Rceiysbb

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Iedpjz Apllofx Aiyobb Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Iedpfx Aijzrnkrjyjbb Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request. Iodpfx Aszmtcijiyjbb

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included. Ibjdpfezlgbpox Aiyeb

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Ibsdpfx Aezmt U Esiyeb

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm Isdpfx Aey Nd Sisiysbb spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Isdpoxftqdefx Aiyebb

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system Iodpfxjgqfmnj Aiyobb STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Ibodpfx Ashv U S Njiyjb Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. Ibedpfoq Nf S Rsx Aiyob 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe Ijdpfxjw Hxiwe Aiyobb BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: like new (used), Year of construction: 2013, Machine has been equipped with a new PCD software. Ibjdox Tpibopfx Aiyjb

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, controller model: Fanuc Oi-MC, KAFO HMC 630 HMC Category: HORIZONTAL MACHINING CENTERS (HMC) Reference No.: 400234 Capacity: 630 X 630 MM Year of Construction: 2008 Technical Specification: SPINDLE Spindle Taper : CAT 50 WORKING CAPACITY Pallet Size : 630 x 630 mm Travels (XYZ) : X1050 x Y800 x Z880 mm Ibodey D E Syjpfx Aiysb B-Axis : 0.001° Distance from spindle nose to table center : 150 - 1030 mm Distance from spindle center to pallet surface : 100 - 900 mm Table Load Capacity : 1200 kg Max. Work Size : Ø1050 mm ATC Tool Change Capacity : 40 Maximum Tool Weight : 20 Kg CNC Control : Fanuc Oi-MC