Used Turret Punching Machine for sale (64,168)

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 173, punching force: 30 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, feed rate X-axis: 100 m/min, controller model: AMNC-F (FANUC 180i-PB), No minimum price – guaranteed sale to the highest bidder! Auction of an AMADA EMZ-3610 NTZ including LKI MP SheetCat 3015 manipulator! Bidding obligates timely collection between 23.03.2026 and 27.03.2026! AMADA EMZ-3610 NTZ TECHNICAL DETAILS Punching force: 300 kN Turret capacity: 45 stations Max. material size: 1,525 × 5,000 mm Kwedpfxeycqm Se Adwst Max. material thickness (mild steel): 4.5 mm Max. material weight (F1): 50 kg Max. material weight (F4): 150 kg Travel range X-axis: 2,500 mm Travel range Y-axis: 1,525 mm Feed speed X-axis: max. 100 m/min Y-axis: max. 80 m/min Strokes per minute 1 mm pitch (5 mm stroke): 780 rpm 25.4 mm pitch (5 mm stroke, X-axis): 500 rpm 25.4 mm pitch (5 mm stroke, Y-axis): 330 rpm Max. stroke length: 37 mm Turret indexing speed: 30 rpm Positioning deviation: 0.07 mm MACHINE DETAILS Connected load: 27 kVA Compressed air requirements Base machine functions & air blow: 250 l/min POWER VACUUM (EMK) / AIR JET VACUUM (EMZ): 250 l/min Operating pressure: 5 bar Control unit Controller: AMNC-F (FANUC 180i-PB) Controlled axes: 4 axes (X, Y, T, C) + A-axis Programming: metric or inch Dimensions & Weight Approx. dimensions (L x W x H): 5,422 x 5,120 x 3,241 mm Height without leveling elements: 2,317 mm Height with mirror: 3,241 mm Machine weight: approx. 24.5 t LKI MP SheetCat 3015 TECHNICAL DETAILS Max. sheet size: 3,050 × 1,525 mm Min. sheet size: 1,000 × 300 mm Sheet thickness: 0.5–6.0 mm Max. sheet weight: 300 kg Max. load per pallet: 3,000 kg Max. pallet stack height: 300 mm Max. load, stacking table: 4,000 kg Cycle time (continuous production): approx. 37 s Max. movement speed loading unit: 60 m/min Max. movement speed unloading unit: 30 m/min MACHINE DETAILS PLC: Mitsubishi Q-Series Operating terminal: Beijers E1032 Dimensions & Weight Approx. dimensions: 5,775 x 3,775 x 3,100 mm Approx. weight: 4,100 kg Max. compressed air requirement: 750 l/min EQUIPMENT 2x chip trolleys, Bauer EXPO 150, year: 2023 34 vacuum suction cups 3 separation magnets/pallets Double sheet detection with thickness measurement Note: Control parameters are missing.

Condition: used, functionality: fully functional, Year of construction: 1987, sheet thickness steel (max.): 4 mm, travel distance X-axis: 600 mm, compressed air connection: 5 bar, overall weight: 3,900 kg, I stopped producing garden furniture and that`s why I sell it. Good and reliable japanese machine. Many tools,some are brand new Amada original turrets. Manual book exist. Kjdpfexvmq Ejx Adwjwt

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS Kwjdexvch Tspfx Adwjt SAFETY GUARDS

Condition: used, Punching machine Bograma Description: - Standard equipped Ksdpexlr Nrsfx Adwowt

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Ksdpfx Adsx Tiq Sjwswt Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Kedpfxjxxb Rrs Adwewt For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the Kwedpfx Adsyak Ikewot user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Weight kg 600

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute Kjdexn Tywjpfx Adwswt - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Year of construction: 2021, condition: good (used), Die-cutting and embossing machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Min. sheet format: 300 x 350 mm Max. sheet format: 760 x 1,060 mm Max. machine speed: 8,000 sheets/h Kwedpfx Ajvxu Smjdwot Max. die-cutting pressure: 2.6 MN / 260 t Materials and stack height (incl. pallet) Paper min.: 90 g/m² Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Max. feeder pile weight: 1,500 kg Without blank separating station Without MasterSet 21126ä

Condition: excellent (used), functionality: fully functional, Height 475 mm Width 200 mm Operating pressure 6/7 bar Operating temperature 0/40° C Ksdpfox U Efnox Adwowt Weight 20 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller Kwedpfx Aeya U Twodwet - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing Kwsdek S Htxepfx Adwjt - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: good (used), Year of construction: 2001, functionality: fully functional, Control: Trumpf Sinumerik 840 D Working area: 3000 x 1650 mm Max. sheet thickness: 8 mm Max. punching force: 220 kN Active hold-down force: 4.5 – 20 kN Max. workpiece weight: 200 kg Speeds: X-axis: 100 m/min Kwjdpfxeycia Ds Adwot Y-axis: 60 m/min C-axis: 330 rpm Simultaneous X-Y: 116 m/min Punching stroke rate: 1000 1/min Marking stroke rate: approx. 2800 1/min Linear magazine: 21 tools with 4 clamps With light barrier, no further accessories! No tools included! FREE LOADED onto truck!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Kwjdpfeww E Nrox Adwjt Incl. platform Quick-lock frames at all tooling stations

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, General Data Measurements height 2252 mm Control Unit Brand BOSCH Model MTX CMP70 Kwodpjx D Dkljfx Adwet Dimensions Machine Length 6500 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1250 mm Main Drive Punching force 180 Kn Maximum sheet thickness 6.4 mm This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Application Types Punching

Condition: good (used), Year of construction: 1998, functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, working width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Ksdjq Ikhpepfx Adwowt Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,000 h, Additional Equipment Precision deburring and roller technology Smart Punch Monitoring Parts conveyor belt for part removal flap Advanced punching equipment Kwjdpsx R E Nxefx Adwot This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine. Application Types Punching

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Kwjdpfxsx U Eias Adwst Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, functionality: fully functional, Year of construction: 2018, TRUMATIC 6000 FIBER (K06) LARGE FORMAT + SHEETMASTER + GRIPMASTER Year of manufacture: 2018 Laserpower: 3kW fiber Additional functions, MACHINE: Punching quality package Forming package MultiTool function Engraving function SoftPunch function Die spray lubrication with level monitoring Descending die Integrated flattening function Smart punch monitoring Additional clamp 1 pc Individually opening clamp 4 pc Repositioning cylinder Vibration damping Brush tables with loading and unloading aid Warped sheet detection Wireless Operation Point MDA interface Additional functions, SHEETMASTER: SheetMaster 3000 x 1500 mm (AK04) Loading station with fanning magnet Unloading platform Loading and unloading parallel to production Peeling system including positioning aid for large-sized sheets Additional positioning aids for medium-sized sheets Kwodpfxsyambas Adwet Additional positioning aid for small-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Additional functions, GRIPMASTER: GripMaster 3000 x 1500 mm Parts conveyor belt for punch & laser side

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap Kodpfx Ajx I T Dxjdwowt :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: ready for operation (used), Year of construction: 1997, Working area: 2500 x 1280 mm Punching force: 220 kN Kedpex Tr S Sofx Adwewt For sheet thickness up to: 8 mm Weight approx.: 11 t

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t pressure 30 t volt 380 V frequency 50 Hz Ksdpfxspxri Hs Adwewt

Condition: used, Year of construction: 1988, 220 V Kwsdpfendz Npjx Adwot frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze pressure 50 t

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,200 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, cutting range flat at 90° (X-axis): 2,500 mm, cutting range flat at 90° (Y-axis): 1,270 mm, AMADA EM2510NT CE (2005) | 20t CNC Turret Punch Press | NT Semi-Automatic | PLN 180,000 net For sale: AMADA EM2510NT CE CNC turret punch press from 2005. The machine is fully operational, currently in continuous use, and can be powered on and tested on site. CE version. ⚠️ Sale includes the machine only – WITHOUT TOOLS ✅ Key information: • Manufacturer / Model: AMADA EM2510NT CE • Year of Manufacture: 2005 • Type: CNC turret punch press • Punching force: 20 tons / 200 kN • Operating hours: 17,200 h • Condition: fully functional, ready for operation • Last inspection: November 2025 • No faults/alarms on the controller • Machine testing available on site Ksdsyapzcspfx Adwjwt _____ ✅ Technical specifications: • Working area: 2500 × 1270 mm • Sheet re-positioning: up to 5000 × 1270 mm • Max. sheet thickness (mild steel): 3.2 mm • Control: AMADA • Tool turret _____ ✅ Automation (NT) Machine equipped with NT system – semi-automatic: • streamlines sheet feeding/positioning • increases production efficiency ⚠️ Note: This is a semi-automatic system (not full automatic loading/unloading). _____ ✅ Scope of supply: ✔ AMADA EM2510NT CE punch press ✔ complete, operational machine with fixed auxiliary equipment ✔ documentation/manuals NO TOOLING (tooling is not included in the sale) _____ ✅ Application Ideally suited for: • sheet metal component production • perforation and technological hole punching • enclosures, covers, panels, control cabinets • parts for welding and bending _____

Year of construction: 2025, operating hours: 100 h, condition: new, functionality: fully functional, Maximum jumbo roll width: 450 mm Kodpfjvq I Niex Adwewt Maximum jumbo roll diameter: 1000 mm Maximum rewinding diameter: 500 mm One rotary die-cutting unit Die-cutting (roll-to-roll): 120 m/min Compatible with magnetic cylinders from 12" to approximately 24" Optional features not included in the offer price: Magnetic cylinder holder: Adaptable to existing die-cutting units. iKnife Automatic knife positioning system: Available as an additional option. Contact us. We will be happy to provide you with a detailed quotation.