Used Tube Deburring Machine for sale (65,606)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Knjdpfx Aszzkvpjnuec Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Kedpfx Anszyv Syjuenc Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, nominal power: 6 kW (8.16 HP), workpiece height (max.): 120 mm, workpiece width (max.): 780 mm, Q-Fin Topgrinder Year of manufacture: 2017 Maximum part width: 780 mm Part length: unlimited 2 stations for grinding or deburring, rotatable Manually guided grinding plates Mobile machine on rollers Benchtop grinding machine for deburring, grinding, and rounding the edges of sheet metal parts. Integrated vacuum pump for fixing the sheet metal parts to the machine table. Kjdsz Nxmqepfx Anujnc Also suitable for small parts and long sheet metal strips. The side and front panels are magnetically held and can be folded down if required. Ergonomic operation via buttons on the handle. Used, in very good condition, with numerous accessories.

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating Kodsu Itlnspfx Anujnc The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: ⚙️ Core Specifications Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Knedexx Nq Tjpfx Anujc Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Modular Design: Configurable for different layouts and productivity goals. Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – Precision Meets Performance Knjdpfxey Ix E Ie Anuoc The ACME tube and profile laser system represents maximum efficiency and flexibility for modern tube and profile machining. Equipped with four high-precision chucks, vertically positioned guides, and three movable clamping systems, it ensures stable and precise processing of a variety of workpieces. The system is available with multiple machining diameters (Ø 280 mm, 360 mm, 550 mm, 640 mm, and 800 mm), providing maximum adaptability to diverse production requirements. With selectable laser powers of 3 kW, 6 kW, 12 kW, and up to 20 kW as well as a processing length of up to 12 meters, this machine meets the highest industrial demands. High-quality components from renowned manufacturers guarantee durability and process reliability. Of course, the system is CE-compliant and meets all common safety standards. Efficient production workflows are ensured by semi-automatic loading and unloading, complemented by an integrated small parts conveyor belt. The innovative 45° laser head also enables precise cuts even for complex geometries. ACME – Your solution for high-performance tube and profile laser processing at the highest level.

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Knjdpfjt Dk Uksx Anujc Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Maximum performance for modern tube and profile processing The ACME tube and profile laser system was developed for the highest demands in industrial manufacturing and combines precision, productivity, and flexibility at the highest level. Thanks to its powerful design and intelligent automation, it is ideally suited for steel construction, mechanical engineering, plant engineering, metal processing, and demanding job-shop operations. The innovative machine concept with four high-precision chucks, three movable clamping systems, and vertically arranged guides ensures exceptionally stable workpiece guidance. This allows even long, heavy, or complex tube and profile geometries to be processed with the highest accuracy. The system is available in various versions for tube diameters of Ø 280 mm, Ø 360 mm, Ø 550 mm, Ø 640 mm, and Ø 800 mm and can be optimally adapted to individual production requirements. With available laser powers from 3 kW to 20 kW and processing lengths of up to 12 meters, the ACME tube laser system offers maximum performance reserves for a wide range of applications – from thin-walled profiles to heavy structural tubes. Your advantages at a glance ✔ Four high-precision chucks for maximum processing accuracy ✔ Three movable clamping systems for optimal workpiece guidance ✔ Vertical guide structure for maximum stability and dynamics ✔ Tube diameters up to Ø 800 mm available ✔ Processing lengths up to 12,000 mm ✔ Laser powers of 3 kW, 6 kW, 12 kW and up to 20 kW ✔ Innovative 45° laser head for weld preparation and complex contours ✔ Semi-automatic loading and unloading for efficient production processes ✔ Integrated small parts conveyor for automatic parts removal ✔ High process reliability thanks to high-quality brand-name components ✔ Full CE compliance according to European safety standards ✔ German-speaking service and professional online support Technical highlights Powerful tube processing Tube diameter: Ø 280 mm to Ø 800 mm Processing length: up to 12,000 mm Four-chuck technology Remainder optimization through intelligent clamping technology High dynamics with maximum positioning accuracy Advanced cutting technology Laser powers from 3 kW to 20 kW Precise contour and miter cuts 45° laser head for weld preparation Optimal cut quality for a wide range of materials Automation for maximum productivity Semi-automatic loading and unloading system Automatic small parts disposal via conveyor Reduced downtime Higher output with less personnel Typical application areas Knjdpfx Anjzb Irpjusc Steel and hall construction Mechanical and plant engineering Metal and tube processing Vehicle and commercial vehicle construction Agricultural technology Facade and railing construction Furniture and profile manufacturing Job-shop operations Quality and safety The ACME tube and profile laser system meets all relevant European safety requirements and is delivered CE-compliant. High-quality components from leading manufacturers ensure a long service life, high availability, and maximum investment security. ACME tube and profile laser system More performance. More precision. More possibilities. The intelligent solution for economical and highly productive tube and profile processing in modern manufacturing.

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Kjdpfez Smvgex Anusnc

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5.5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Knsdpoxx A Eksfx Anuoc Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Technical details: Knjdewiu Smspfx Anuec Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE *

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Knsdjzwlnropfx Anuoc Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection

Condition: like new (used), Year of construction: 2023, Deburring brush with 2 speeds, 1500/3000 rpm Operating manual Kodozmp U Uepfx Anujnc

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Inspection and demonstration possible by appointment. Kjdpfxeyr H A Ie Anuenc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: M961287, overall weight: 17,000 kg, Herber 127 CNC in very good condition. Kedpfxe Aax Uze Anusnc The control system has been upgraded to "WinBoHerber". Year of manufacture: 1996 Capacity: Ø 127 x 5 mm Radius: min./max. 80/400 mm Bending speed / repeatability: 40°/s; ±0.1° Mandrel length: 4,000 mm Weight: 16,000 kg Machine dimensions: 7.0 x 2.2 x 1.8 m Motor: 40 kW Longitudinal feed: 900 mm/s Tolerance range: 0.05–0.1°/mm Tools are also included in the scope of delivery. Ø 50, radius 101.6 mm, folding smoother. On request, we also offer installation and training.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Kodpozd Hhmsfx Anuenc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, sheet thickness (max.): 15 mm, pipe diameter (max.): 240 mm, pipe length (max.): 6,050 mm, working length: 6,050 mm, working width: 240 mm, working height: 240 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 6,800 mm, travel distance Z-axis: 250 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 60 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 300 kg, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, total length: 16,000 mm, total width: 4,470 mm, total height: 2,450 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, # Tube Laser LT6025G – High-Performance Tube Laser Cutting System with 3-Chuck Technology and Zero-Tailing System ## Precise Tube and Profile Processing at the Highest Level The LT6025G tube laser cutting system was developed for economical and highly precise processing of tubes and profiles. Thanks to state-of-the-art 3-chuck technology, powerful servo drives and an intelligent zero-tailing function, the system enables maximum material utilization while simultaneously ensuring the highest cutting quality. The machine is ideally suited for steel construction, metal construction, mechanical engineering, plant engineering, as well as for job shops and series manufacturers with the highest requirements for productivity and precision. --- ## Technical Data * Model: LT6025G * Tube Length: up to 6,000 mm * Tube Diameter: approx. Ø 10 – 250 mm * Clamping System: 3 fully automatic pneumatic chucks * Acceleration: up to 1.2 G * Positioning Accuracy: ± 0.05 mm / 1,000 mm * Repeatability: ± 0.03 mm / 1,000 mm * Cutting Gases: Oxygen, Nitrogen, Compressed Air * Drive System: High-dynamic Servo Drive Technology * Automatic Central Lubrication * Professional Tube Nesting Software * Robust Machine Construction for Continuous Industrial Use --- ## Processable Materials and Profiles The LT6025G processes a wide variety of tube and profile shapes: * Round Tubes * Square Tubes * Rectangular Tubes * Oval Tubes * Angle Steel * U-Profiles * Channel Profiles * Open Profiles * Special Profiles --- ## Zero-Tailing Technology The innovative zero-tailing system reduces the unavoidable scrap section to a minimum, thereby significantly increasing material utilization. This is particularly advantageous with high-priced materials, resulting in a noticeable reduction in production costs and sustainably improving profitability. --- ## Your Advantages at a Glance Knodpfxezb Irvj Anuoc ✔ Modern 3-chuck clamping system for maximum precision ✔ Minimized material waste thanks to zero-tailing technology ✔ High dynamics and productivity through 1.2 G acceleration ✔ Excellent cutting quality and clean cut edges ✔ Precise drilling, contours and cutouts in a single operation ✔ Fast changeover for different profile shapes ✔ Reduction of rework and grinding effort ✔ High process reliability in series production ✔ Suitable for single-part, small-batch and large-batch production ✔ Economical production with high flexibility --- ## Typical Applications * Steel Construction * Metal Construction * Mechanical Engineering * Plant Engineering * Vehicle Construction * Commercial Vehicle Construction * Furniture and Profile Manufacturing * Job Shop Manufacturing * Tube Processing --- ## Inspection and Demonstration An inspection of the system and a test run with your components are possible at any time by prior appointment. We will gladly provide you with further technical documentation, videos, sample parts or an individual offer.

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Knjdezrt Uispfx Anujc Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Knsdjzyu R Uspfx Anuoc Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and closing machine - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Machine prepared for hot-air sealing of plastic tubes - Electrical connection for hot-air sealing head available - Hot-air sealing head currently not included / not available - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. The machine is prepared for the installation of a hot-air sealing system for plastic tubes, including the corresponding electrical connection. However, the required hot-air sealing head is currently not available with the machine. CYCRON is presently in contact with AXOMATIC in Italy to clarify the availability of the original hot-air sealing head or a suitable replacement, as well as further technical documentation, spare parts, and the possibilities for completing the machine for plastic tube processing. CONDITION Used machine in very good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. Exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available on request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: good (used), Year of construction: 2007, workpiece height (max.): 100 mm, workpiece width (max.): 1,300 mm, Workpiece height – max. 100 mm Workpiece width – max. 1300 mm Feed rate 0.4 – 2.6 m/min Number of spindles 6 pcs Spindle length 6 x 350 mm Total power consumption 7.5 kW Machine weight approx. 2.3 t Kedpj Aaxuzofx Anujnc Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.

Year of construction: 2017, condition: used, Year 2017 Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Ksdpfx Ajz Ic Arjnusnc

Condition: used, Year of construction: 1995, Brush deburring machine with 2 different speeds, depending on material 1000 or 1500 rpm. Kodpfx Asz Hx Hkjnuenc

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 2,000 h, laser power: 2,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,050 mm, working length: 6,500 mm, input voltage: 380 V, input current: 63 A, type of cooling: water, total length: 11,600 mm, total width: 3,000 mm, total height: 2,600 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, For sale is a used Bodor T230 tube laser. Tube length 6000mm, diameter 230mm, unloading length 2000mm. The machine is in good condition and can be inspected. The system has been reliably serviced and maintained by our trained personnel. Operating manual, CE certificate, extraction system, etc. are included. Inspection in Mönchengladbach. Kodjypawyopfx Anusnc

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Filtration: Welldone dust collector and filtration unit Key highlights Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm Knodpozuf Dhsfx Anuoc X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Operating temperature / humidity 0 – 40 °C / < 90 %

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Kedjy Uuw Topfx Anusnc Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.