Used Tunnel Freezer for sale (1,487)

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Nwedpexpww Aefx Aphjk Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Automatic Stacker: SPS AUTOSTACK 2 Nedpfxew Eb Uas Aphowk

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Linde / Bitzer | Triple-Compressor Industrial Chiller Technical specifications of the frame: Unit manufacturer: Linde Aktiengesellschaft Model / Type: VHM 316-4521 Serial number: 10309 Year of manufacture: 1993 Refrigerant: R22 Allowable working pressure: 25 / 13 bar Overall dimensions of the frame: 2930 × 830 × 1870 mm Specifications of the installed compressors (3x Bitzer Kühlmaschinenbau GmbH): Power supply: 380–420 V (50 Hz) / 440–480 V (60 Hz) – 3 phases Maximum operating current: 24 A (per compressor) Volumetric capacity per unit: 42.3 m³/h (for 50 Hz) / 51.0 m³/h (for 60 Hz) Total volumetric capacity of the unit: 126.9 m³/h (for 50 Hz) / 153.0 m³/h (for 60 Hz) Protection class: IP 54 List of compressors in the section: Compressor no. 1: Type S4G-12.2 Y Serial number: 15851279 Compressor no. 2: Type S4G-12.2-40P Serial number: 1676905728 Compressor no. 3: Nodpfxey Ub A Nj Aphewk Type S4G-12.2-40P Serial number: 1678210359 Industrial central multi-compressor unit (so-called "compressor pack") built by the German Linde Group based on three two-stage, semi-hermetic Bitzer reciprocating compressors from the S4G series. This type of system is designed to power low-temperature installations – freezers, freezing tunnels, and advanced refrigeration systems in food processing plants (meat, fish, bakery). The design based on three identical units allows for very flexible, three-stage cooling capacity management (in steps of 33%). The system automatically activates the appropriate number of compressors depending on the actual thermal load, which optimizes energy consumption and extends the service life of the components. The entire unit is mounted on a compact support frame, which facilitates installation. Key features: - Reliable Bitzer two-stage compressors: The two-stage compressor series is specifically designed for deep freezing. It ensures stable operation at very low evaporation temperatures and is characterized by a high energy efficiency ratio. - Safety and automation of the Linde frame: The industrial design of the frame integrates a common suction and discharge manifold, an advanced oil equalization and separation system, and the necessary control and measuring equipment (protective pressure switches), which effectively protects the system from failures. - Industrial protection class (IP 54): Hermetic electrical boxes and the compressor design protect the system from moisture and dust, allowing for safe operation in harsh machine room conditions. - Application versatility: The unit is factory-designed to operate with R22 refrigerant. Due to the presence of compressors with the "Y" designation (filled with ester oil), the system can be successfully adapted to work with modern, environmentally friendly alternatives from the HFC group (e.g., R448A / R449A / R404A / R507) after a standard verification of seals and automation settings.

Condition: excellent (used), mileage: 2,68,270 km, power: 120 kW (163.15 HP), first registration: 02/2020, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, suspension: steel, total length: 6,220 mm, total width: 2,210 mm, total height: 2,880 mm, permissible axle load (axle 1): 1,650 kg, permissible axle load (axle 2): 2,250 kg, loading space length: 3,510 mm, loading space width: 2,080 mm, loading space height: 1,960 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, electric window regulation, navigation system, onboard computer, power assisted steering, power mirror, soot filter, traction control, Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1650 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 30%; Tyre profile right: 30% Nwjdpfx Apjzak Abjhsk Weights Empty weight: 2.899 kg Carrying capacity: 601 kg GVW: 3.500 kg Functional Cooling: 20 °C to 20 °C Make of bodywork: ThermoKing V500 MAX Cooling engine: diesel and electric Wall thickness: 10 mm Environment Emission class: Euro 6d Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: very good Visual appearance: very good Identification Registration number: 077624 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - DAB Radio - Multifunctional Steering Wheel - Multitemp - Particulate filter - Radio/Cd/Audio system - Reversing camera - Side door - Standby 380V = Remarks = Video of working vehicle: Very neat Mercedes Sprinter 316 CDI Refrigerated Van MT -20/+20 Cools, freezes, and heats ThermoKing V500 MAX Multitemp with folding partition Day and night cooling 380V 268,000 KM verifiable with Carpas

Condition: used, axle configuration: 3 axles, first registration: 12/2014, loading space length: 13,280 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = Nwjdjy Nmwnjpfx Aphok - Air Suspension - Drum brakes - Refridgerator - SAF Assen = More information = Tyre size: 385/65 Make axles: SAF Tyre profile: 30% Brakes: drum brakes Suspension: air suspension Cooling engine: diesel and electric (9842 operating hours diesel; 6 electric)

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 02/2006, loading space length: 11,640 mm, loading space width: 2,490 mm, loading space height: 2,490 mm, total length: 12,200 mm, total width: 2,600 mm, wheelbase: 7,460 mm, color: other, Year of construction: 2006, Equipment: tail-lift, Axle configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steering Weights Empty weight: 9.120 kg Carrying capacity: 23.880 kg GVW: 33.000 kg Functional Tail lift: BAR CARGOLIFT, 3000 kg Cooling engine: diesel Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: OJ-71-FV = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Njdpfxey Af A Ne Aphowk When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2025, LABELshrink tunnel. Basic version with conveyor for smoothly shrinked labels on caps only. For bottles/cans/glasses without any corrugation. Two blowing motors for low and turbo air blowing. - Specificationen: max. product size: Ø 120xH400mm; tunnel size: L1000xW150xH400mm; machine dimensions: L1530xW400xH1300mm; output: up to 200 bottles/min; power: 380V, 9.0kW. Nwsdsv Nlw Iopfx Aphsk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (NORDSON glue system) and add a tray underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm; max. speed of the machine in neutral: 50 cycles/minute; total dimensions: L10070xW1650xH2485mm; weight: 5600kg; power: 380V, 13kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 160 liter/min, 6bar. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nodpfxev Nl R Us Aphjwk

Condition: new, Year of construction: 2025, ECONOMY version of POF-XL shrink tunnel for middle sized products. Suitable for polyolefin films. Very attractive price because of some no-name parts. Adjustable speed and temperature. - Technical specifications: 380V, 15kW; speed: max. 0-10m/min; max. product dimensions (mm): W500xH200; machine dimensions (mm): L2300xW900xH1380; weight (net/gross): 280/330kg. Njdpev Nl Srsfx Aphowk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Shrink tunnel for middle sized products. Suitable for polyolefin films. Adjustable speed and temperature (up to 175°C). - Technical specifications: 380V, 12kW; speed: max. 15m/min; max. product dimensions (mm): W450xH220; machine dimensions (mm): L1600xW770xH1450; weight (net/gross): 250/310kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nodpfx Ajv Nl S Esphewk

Condition: new, Year of construction: 2025, Shrink tunnel for extra large/wide products. Suitable for polyolefin films. Adjustable speed and temperature. Can be combined with SIDEshrink W20-XXL. - Technical specifications: 380V, 15kW; speed: max. 15m/min; max. product dimensions (mm): W1500xH250 (can be varied on demand); machine dimensions: L2840xW1560xH1310mm; weight (net/gross): 450/550kg. Njdpfxjv Nl Tis Aphjwk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, SHRINKtunnel suitable to be combined with AMTEC Shrink Wrapper speed shrink 35L. High speed shrinking with 0-20 m/min for POF (Polyolefin) film. - Specifications: max. packaging size: L(customized)xW550xH250mm; tunnel size: L1500xW650xH300mm; power: 380V, max. 18kW; machine dimensions and weight: L1800xW1140xH1300mm, 700kg. Nwjdpfx Apsv Nl Tvohek Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, PRO-version shrink tunnel to heat shrink very large products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40XXL (vertical) PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW800xH300mm; tunnel size: L2400xW850xH400mm; machine dimensions: L2400xW1320xH1750mm; power consumption: 380V, 24kW. Njdpfx Aov Nl U Tsphewk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 1995, condition: used, Tunnel pasteurizer, make Simonazzi, type: Vesuvio 640, in stainless steel, up to 36.000 bph, with 6 zones, with plastic chain, steam heated, width: ~4.000mm, length ~14.000mm, built 1995, in 2003 overhauled by Brewpack, control cabinet in s/s, pasteurizer dismantled and stored Njdpfxjl Slyzo Aphewk

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Njdpfx Apjqa Dv Tehowk Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver Njdszhub Aopfx Aphswk - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, functionality: unexamined, machine/vehicle number: LGPv 1420, Used Liebherr Laboratory Freezer Manufacturer: Liebherr (Mediline) Model: LGPv 1420 Index 41C/001 Manufactured: 2016 Details: Capacity: 1427 litres External dimensions (W x D x H): 1430 x 830 x 2150 mm Internal dimensions (W x D x H): 1250 x 700 x 1550 mm Complete with 8 shelves, max. load 60 kg Temperature range: -10 to -26°C Nsdpfx Aoxiw Uujphswk Energy consumption: 8.887 kWh/24h Dynamic freezing system with fan Automatic defrost With lock and on castors Door, steel-white Weight approx. 219 kg

Condition: used, mileage: 6,71,973 km, power: 309 kW (420.12 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, traction control, Permissible gross weight: 18,000 kg, interior color: white, leaf/air suspension, retarder, digital tachograph, shunting coupling: ROCKINGER SK5, PTO: MAN 651P with pump connection 1.28/1.58 700 Nm, low-noise: noise reduction 80 dB (92/97 EEC), MAN BrakeMatic, emergency brake assist 2, electronic stability program (ESP), traction control system (ASR), automatic climate control, stationary air conditioning, additional heater: EBERSPAECHER D4S, comfort driver's seat, air-suspended driver's seat, driver's armrest, heated driver's seat, headlight range control, radio: MAN Media Truck, AUX & USB port, Bluetooth audio streaming, sound system, Bluetooth hands-free, lane guard system (LGS), multifunction leather steering wheel, adjustable steering column, driver's lumbar support, alloy wheels: ALCOA Dura Bright EVO, electric front windows (2x), fog lights, electrically adjustable and heated exterior mirrors, kerb mirror (right), heated wide-angle mirror, immobilizer, central locking with remote control, tinted side windows from B-pillar, rear differential lock, front underrun protection, sun visor, fridge, 2 work lights, hill start assist: EasyStart, LED daytime running lights, spare wheel holder, 1x 15-pin connector, manual roof hatch, front cup holders, brushed aluminum decorative inserts, cornering lights, carpet flooring (engine tunnel), cab insulation: NORDIC, RIO Box, electronic speed limiter: 80 km/h, voltage converter, suspended cab, front parabolic springs 8.0 t, rear air suspension 13 t, colored instrument cluster "High-Line" km/h, rear axle Hypoid HY-1350, HY axle ratio i 2.85, control module for external data exchange (KSM), single-cylinder air compressor 360 cc, 3-stage electronically controlled rocker lever brake (EVBec), flame start system, cross member for trailer coupling, steel air reservoirs, ADR wiring for tank truck, ADR type AT, supply kit for semi-trailer with lift axle or starting aid, 2 air horns on cab roof/roof spoiler, 24V socket. Nodpfx Apozth Igohowk

Condition: used, This listing is for a Labcold RVPF0734 Plasma Freezer. Nsdjxx Afqjpfx Aphswk The unit is in full working condition and is ready for immediate release. Ensure the highest standards of blood plasma storage with the Labcold RVPF0734 Plasma Freezer, a state-of-the-art laboratory-grade solution designed for optimal performance and safety. This floor-standing freezer combines advanced technology with a space-saving design, making it an ideal choice for healthcare facilities and research laboratories. Key Features: Optimal Temperature Control: Achieve a consistent temperature range of -34°C, essential for preserving plasma quality and integrity. Faster Thawing Times: Designed to minimize thawing duration's, reducing the risk of bag cracking and ensuring safe handling of sensitive materials. Convenient Storage: Equipped with front-opening doors and multiple storage drawers, allowing for easy access and organization of plasma bags. Digital Alarm and Display: Stay informed with real-time monitoring through a digital display and alarm system, ensuring immediate alerts for any temperature fluctuations. Chart Recorder: Track temperature changes over time for compliance and quality assurance. Benefits: The Labcold RVPF0734 is registered as a medical device in accordance with EU Directive 93/42/EEC and compliant with BS4376: Part 2:1996, ensuring reliability and safety in plasma storage. Its spark-free interior and lockable doors provide secure access and protection against flammable materials. Technical Specifications: Temperature Range: -34°C (tested to reach -36/-37°C) Safety Features: Spark-free interior, lockable doors Monitoring: Digital thermometer included for precise temperature tracking

Condition: used, Goedhart NH3 R717 evaporator for sale. Dimension L x W x H ( 2100mm x 900mm x 2700mm ) Nedpfx Asywzt Hjphjwk Located Locally in Hungary (EU). There are 2 of them. The price is for one piece.

Condition: good (used), For sale: 2 automatic PrintEX screen printing carousels + tunnel + 3 IR flash dryers Nedpoztn Elefx Aphewk For sale: a complete set of screen printing machines for textiles from PrintEX. The set includes: 1. Automatic PrintEX 11/14 screen printing carousel 11 colors / 14 pallets 2. Automatic PrintEX 6/8 screen printing carousel 6 colors / 8 pallets 3. Drying tunnel for prints The tunnel has an air-blowing function, making it also suitable for use with water-based inks. 4. 3 IR flash dryers The set includes 3 IR/flash dryers for intermediate drying of prints between colors. The machines have very low usage hours for screen printing equipment. The equipment is robust, industrial-grade, and designed for printing on t-shirts, sweatshirts, bags, and other textiles. The set is ideal for a garment printing company, an advertising agency, or someone who wants to expand their print production. The machines can be viewed on-site. Pick-up in person / transport is the buyer's responsibility. Price: negotiable Please contact me.

Condition: used, functionality: fully functional, mileage: 3,39,027 km, power: 338 kW (459.55 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,510 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with carbon filter, sun, mist, and air qu Driver Seat: Comfort 5: suspended & heated - belt in seat Passenger seat: Comfort 5: suspended & heated - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower manual recline bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Cab Exterior Trim Level Enhanced Complete painted finish - Main Grille, handles, mirrors, bumper in cab colour Side skirts on fuel tanks Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Njdpfxjzlcn So Aphjwk Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 1,76,345 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Nwsdpfx Apezmb Dhohjk Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side skirts on fuel tanks Roof air deflector Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 2,26,416 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, overall weight: 8,178 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control with lower operating settings - Map based topography information. Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. AEBS advanced emergency brake system Rear Camera - GSR Compliant fitted at end of frame Driver comfort Electrically controlled air conditioning with sun sensor Nwjdpfjzrdmpsx Aphek Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Parking heater 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Load 7.1 tonnes Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK AdBlue tank - 99 litre under/behind cab Technology Secondary colour information display Fleet Management System gateway - required for telematics and Dynafleet dealer fit Exterior Daytime driving lights LED, V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 7 mm Front right - 5 mm Rear left inner - 7 mm Rear left outer - 9 mm Rear right inner - 7 mm Rear right outer - 8 mm

Condition: used, functionality: fully functional, mileage: 4,15,206 km, power: 338 kW (459.55 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Cab: Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Nwedpfxjzr Egqs Aphsk Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system. Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 900 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 570 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED Headlights. Automatic headlight switching between day running light and low beam. Front fog lights - white. Tyres Information Front left - 5 mm Front right - 10 mm Rear left inner - 11 mm Rear left outer - 10 mm Rear right inner - 9 mm Rear right outer - 9 mm