Used Twin for sale (3,413)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23 03 28 / 1, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit Ksdpfx Ast Hvkvoanefa - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Fully automatic high-speed traysealing machine for preformed trays – made of plastic or aluminum – in combination with top film obtained from a suitable reel. Kfjdpfx Ajwyucaeansa

Condition: good (used), Year of construction: 2002, machine/vehicle number: 6428 104 014, Offer 25258 Technical data: - Cutting range at 90° round: 400 mm - Cutting range at 90° flat: W 400 x H 400 mm - Shortest cut-off length: 6 mm - Smallest diameter to be sawn: 10 mm - Minimum remnant length for single cut: 15 mm Kfodpfx Ajxc Hinsanoa - Minimum remnant length in automatic mode: 80 mm - Material feed length, single stroke: 750 mm - Material feed length, multiple strokes: 20,000 mm - Saw band dimensions: 5700 x 41 x 1.3 mm - Cutting speed, stepless: 20 - 110 m/min - Hydraulic lifting/lowering of saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 8.0 kW - Bundle clamping device - Coolant system - Chip conveyor - Required space approx.: W 3000 x H 2200 x D 2300 mm - Weight approx.: 2,800 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Foldable discharge conveyor. Kodpeu Di Azsfx Aansfa Radio remote control.

Condition: excellent (used), Year of construction: 2002, operating hours: 5,960 h, functionality: fully functional, machine/vehicle number: 167032, total length: 7,000 mm, total width: 2,490 mm, total height: 3,200 mm, overall weight: 21,000 kg, rotor diameter: 600 mm, Equipment: type plate available, Komptech Crambo twin-shaft shredder, 450 hp cat engine, 60 cm diameter shafts, 2.82 m long Kedpfx Aswn E Amoanjfa

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: KMM3312510, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 530 mm, table length: 350 mm, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item by 31.07. at the latest! CNC machining center with 2 spindles and 2 swiveling tables! TECHNICAL DETAILS Travel X: 800 mm Travel Y: 400 mm Travel Z: 350 mm Spindle Spindle interface: HSK A63 Spindle speed: max. 10,500 rpm Table Table dimensions: approx. 530 × 350 mm Control Control system: SIEMENS SINUMERIC 840 D MACHINE DETAILS Connection voltage: 400 V 3~ Ksdpfx Ajwyli Reanofa Frequency: 50 Hz Rated current: 87 A Main fuse: 3 × 100 A Min. cable cross-section: 4 × 25 mm² Dimensions & Weight Dimensions (L × W × H): 4,800 × 4,200 × 4,000 mm Weight: 8,800 kg Transport will most likely be carried out using a truck with a width of over 3,000 mm. Further information is available during dismantling and loading.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Two-shaft shredder, in excellent condition, designed for processing hard materials such as plastics, wood, etc. Has only a few dozen operating hours. Components responsible for the quality of the processed material are in very good condition. The machine is capable of shredding individual, non-hardened metal elements with cross-sectional dimensions up to a maximum of 10 mm, as well as pre-shredded sheet metal pieces up to 3 mm thick. Shredding material containing larger, more massive metal components is not in accordance with the intended use of the device and may result in damage to the cutting mechanism. Two-shaft shredder type. Performance (depending on feed consistency and material type): 1.0 – 8.0 t/h Year of production: 2016 Description: Two-shaft shredder. Rotor and parts of the cutting mechanism made of special, high-strength, hardened, wear-resistant steel, easily replaceable. Machine is operated from a control cabinet with operator panel. Feed hopper included. Kfodpfsw Daqqox Aanea Technical data Drive: 2 x 75 kW Power supply: 400 V Cutting chamber dimensions: inlet 1.9m x 1.9m, outlet 1.2m x 1.2m Control cabinet mounted on the machine, equipped with main switch, emergency stop, and all relevant indicators.

Condition: used, machine/vehicle number: 18025, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Online-Video-Inspection by Skype-Video Kedsh Axp Espfx Aanefa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2010, machine/vehicle number: F3554, Offer 25228 Hydraulic Horizontal – Two-column Guided Mitre Band Saw Machine Technical Data: - Automatic operation cycle for cutting process, hydraulic lifting/lowering of the saw frame, hydraulic automatic material feed - Saw blade dimensions: 4400 x 34 x 0.9 mm - Infinitely variable cutting speed: 15 – 88 m/min - Infinitely variable cutting pressure adjustment: 10 – 15 bar - Lowering speed: 0 – 300 m/min - Cutting range 90°: - Round at 90°: 360 mm - Square-flat: 360 x 430 mm Kfedpfxswvrvij Aanea - Hydraulic material clamping - Hydraulic automatic material feed - Coolant system - Drive: 400 V / 3 kW - Space requirement approx.: W 2200 x H 1850 x D 1300 mm - Weight approx.: 1100 kg - Roller table: 2000 mm

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 250 kW (339.91 HP), Mobile shredding plant LINDNER URRACO 75E Electric drive: 250 kW Including control cabinet and cooling unit. Kfsdpfxsv D Dqco Aanja

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: KMM5352002, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 42, Robot loading unit is untested. TECHNICAL DETAILS X-axis: 800 mm Y-axis: 500 mm Z-axis: 510 mm Control: Siemens 840D Spindle and Drive Spindle speed: 36 - 10,000 rpm Spindle torque: max. 102 Nm Tool clamping: max. 12,000 N Tool holder: SK40 Number of tool positions: 42 Feeds Feed rate x/y/z-axis: 1 - 10,000 mm/min Rapid traverse x/y/z-axis: 40 m/min Cutting capacity Milling capacity: max. 400 mm Drilling diameter: max. 50 mm Thread diameter: max. M30 Motors Main spindle motor 1 + 2: Make Kessler Kfsdpfx Aaewlphnsnja Power: 21 kW Speed: 15,000 rpm Servo motor x/y-axis: Siemens Torque: 14.0 Nm Speed: 3,000 rpm Servo motor z-axis: Siemens Torque: 17.6 Nm Speed: 3,000 rpm MACHINE DETAILS Voltage: 400 V / 50 Hz Total power requirement: 70 kW EQUIPMENT - Coolant system with paper belt conveyor - Chip conveyor: Flender MC535/x=800 - Hydraulic unit: HAWE - Promo loading system - untested

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, punching force: 28 t, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, punching diameter: 105 mm, TECHNICAL DETAILS Punching force: 280 kN Working area: 1500 x 3000 mm Kfodpfx Aajwuryljnea Sheet thickness: 6.4 mm Workpiece weight: 200 kg Punching diameter: 105 mm X-axis: 60 m/min Y-axis: 30 m/min MACHINE DETAILS Machine weight: approx. 16,000 kg EQUIPMENT No further information available.

Condition: used, machine/vehicle number: 87367728, Hydraulische Zwillingspresse - Hydraulic Twin Press Tränklein ZP 39Serial-No. 87367728 2 Pressplatten / Size with 2 pressure plates 440 x 320mm Pressdruck / Pressure max. 5000KG Druck stufenlos regelbar / Pressure steppless Maschine fahrbar / machine mobile Platzbedarf / Place require 85 x 70 x 150 cm Kedormumdjpfx Aansfa Gewicht / weight 420kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 6235, Twin-headed Stapler for Booklets - Pads Nagel MultinakSerial-No. 6235-1 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Kjdpfeh Axxxex Aanjfa Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19171, Twin-headed Stapler Nagel Mulinak Sitcher Kjdsh Axykspfx Aanefa Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kodeh Ax H Ropfx Aansfa On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 14069, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Nagel Multinak SYear 1994 - Serial-No. 14069 Kfjdpjh Axppefx Aanja Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 18086, Doppelkopfheftmaschine - 2 Stitching heads Stapler Nagel Multinak S Mit der MULTINAK S Doppelkopfheftmaschine mit elektrischem Antrieb heften Sie Broschüren und Blocks bis 27 mm Stärke, für Block- und Sattelheftung. Electric stapling machine with two stapling heads with adjustable distance for block and saddle stapling for brochures in medium to high work volumes, for flat and saddle stapling stiting. Baujahr / Year 1996 Heftköpfe AS für Blocks bis 15 mm / Stapling head AS blocks and brochures up to 15 mm  Heftkopfabstand verstellbar im Bereich von / Distance adjustable between 80-155mm Heftklammernlänge / Staples arm length 6-30mm Heftklammernsorten 24, 26, 50 + Ringklammern / for staples no. 24, 26, 50 and ring staples Technische Daten / Technical Details: Anschluss / power supply 400 V / 50 Hz Maße / Dimensions Width 600 x Deep 750 x Tall 1100mm Gewicht / Weight net 100kgs Flaches Anlegen der Heftklammern durch bewegliche Umbieger / moveable bending tools ensure that staples lay flat Einfaches Kippen des Arbeitstisches ermöglicht schnellen Wechsel von Block- auf Broschürenheftung / change-over from flat to saddle stapling is made by simply flicking over the table Maschine ist für Dauerbetrieb ausgelegt - geräuscharm durch Spezialgetriebemotor / for long term use, low noise level through special gear motor Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kjdpfx Aoh Axqxoanjfa On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1980, machine/vehicle number: 6236, Doppelkopfheftmaschine für Broschüren - Blocks - Twin-headed Stapler for Booklets - Pads Nagel MultinakYear 1980 - Serial-No. 6236/1 Online-Video-Inspection by Skype-Video Kodpfx Ash Axptsanjfa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1990, machine/vehicle number: 538, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17Year 1990 - Serial-No. 538 Online-Video-Inspection by Skype-Video Kfjdpfx Aoh Axpweanoa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 378, Twin-headed Stapler for Booklets - Pads Booklet & block stitcher Nagel Multinak-S (18096)Serial-No. 18096 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kjdpjh Axq Ujfx Aansfa On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 912768, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Nagel Multinak SSerial-No. 18093 Online-Video-Inspection by Skype-Video Ksdpfx Ash Axq Aoansfa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kedpfx Aeh Ax H Heansfa On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1986, machine/vehicle number: 469, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17Year 1986 - Serial-No. 469 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kfsdpeh Axpzefx Aansa

Condition: used, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kodpsh Axyvefx Aanjfa On Stock Emskirchen / Nürnberg - Can be test