Used Universal Cutter for sale (5,985)

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M Equipped with Heidenhain TNC 310 control Year of manufacture: 2001 Travel paths: X 500, Y 400, Z 400 mm Speed range: 20 – 4,500 rpm, infinitely variable Includes the following accessories: Manual swivel rotary table with digital display for C + B axes Clamping surface: 700 mm x 500 mm Electronic handwheel for X, Y, Z axes Splash guard enclosure Machine lamp Dcjdoy Id Stjpfx Aa Njg 4 adjustable-height machine feet Coolant system Operating manual

Condition: good (used), Year of construction: 2009, Internal Item No.: 26044 Universal Milling Machine Optimum UF 100 Year of manufacture: 2009 + 3-axis digital readout Spindle taper: SK40 Spindle speed: 45 - 1660 rpm Dcodpfoy H D N Nsx Aa Nsg Table: 1120 x 260 mm Travel: X 625 / Y 220 / Z 430 mm Dimensions (LxWxH): 200 x 200 x 170 cm Weight: approx. 1500 kg The machine is fully functional and can be inspected under power, by appointment, in a heated storage facility of over 500 m².

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Machine height: 3,271 mm Weight: 25,700 kg Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: Dcsdpfswwl Saox Aa Njg - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm Dedpfjlnfggox Aa Nscg For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Dcjdsr Elwkjpfx Aa Neg Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided. Djdpfowf Nn Iex Aa Njcg

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) Djdpedzqnyefx Aa Nocg - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material Dcodeif Ek Rjpfx Aa Njg • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition Dsdpofnlkwefx Aa Necg • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) Dcsdpfewgc I Rjx Aa Njg The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function Djdjfhgvwjpfx Aa Necg 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA Dodpfewltwmjx Aa Necg weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, automatic doors, flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing *

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Dedpfxeyrhb Sj Aa Nocg Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: excellent (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Factory No.: XXXX Year of manufacture: 2008 Origin: Italy Control: Siemens Sinumerik 840D System Control: CswWin / Beckhoff Industrial PC Condition/Maintenance: Very good / Single-shift machine / Very low operating hours Technical Data: X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / Pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy to VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Djdpfx Aoy H D R Tsa Nscg Spindle / Head: U-head horizontal / vertical Spindle taper: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool Magazine: 208 tool positions Rack tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet System: Front transpallet / automatic pallet change system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical Data (as per nameplate): System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Current at full load: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip Conveyor: Manufacturer: Meta Year of manufacture: 2007 Weight: approx. 1,100 kg Additionally, a screw conveyor is visible in the machine area. Equipment / Peripherals: Filtration unit Hydraulic power unit Chip conveyor Screw conveyor COSEMA peripheral unit Control cabinet system Coolant and lubricant periphery Separate operator panel Comprehensive pallet system Clamping Devices / Fixtures: Multiple heavy-duty angle plates, fixture plates, t-slotted/platen clamping plates, customer-specific clamping devices, and pallet setups are available. Tools / Accessories: Numerous SK50 tool holders, boring bars, boring tools, milling holders, drill and reaming tool holders, extensions, adapters, as well as various spare and standard tools are visible. Several hundred additional tool holders can be purchased on request. Optional / On Request: Apfel tool cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting unit Workbenches / tool storage / racking systems by agreement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for the flexible complete machining of large and complex workpieces. The work area shows normal signs of wear characteristic of a production heavy machining system. The system must be removed from the facility in June 2026. Earlier availability possible by arrangement. Inspection under power is possible by appointment. All information provided to the best of our knowledge. Subject to errors, prior sale, and technical modifications.

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC Dcsdpfx Aswbi A Dsa Nog tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: good (used), Hydraulic Center height 130 mm Distance between centers 400 mm Tablesize 900 x 200 mm Grinding head turnable 360° Grinding spindle speeds 2'200 - 6'400 rpm Dedpjy H Dr Dofx Aa Necg Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Misc. accessories Dcsdpjy H Dq Hsfx Aa Njg MARCELS MASCHINEN AG

Condition: new, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Dodpjwv Tqbefx Aa Njcg Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Dedevvi I Repfx Aa Njcg

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Dcsdevvi Iqepfx Aa Nsg

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Dedpfx Aaovvi Nzo Njcg

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Dcjdsvvi Rfspfx Aa Neg

Condition: used, Year of construction: 2004, frequency 50 Hz weight of the machine ca. 2,510 t 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30" x 14.3" Max Table Load: 550 LBS X Axis: 24" Y Axis: 12" Z Axis: 20.47" Dcjdjxgv D Aepfx Aa Nog Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 05/2027, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2026, Hommel Rotormat 2000 Super Surplus Bread Crusher "The Universal Crusher" Stainless steel construction High performance Dsdpjy Hwc Asfx Aa Nscg Connection: 400V, 16A-CEE plug Dimensions: 690 x 650 x 1550mm (W x D x H) Used machine, cleaned with warranty Many more devices in stock!

Condition: used, Year of construction: 2009, x-travel 800 mm Dsdpey Hxrrofx Aa Nocg y-travel 700 mm z-travel 550 mm Control Heidenhain TNC 530