Used Universal Cylindrical Grinding Machine for sale (65,586)

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine xH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device Gbedpfx Ajzaunzonzon *

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Height of centers / Grinding Ø 80 / 160 mm Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Gjdpozbczxjfx Anzsbn Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: used, Technical details: Gedpow Rktbofx Anzsbn grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° Gedpfx Anjw Rktzozjbn weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless Gbjdou Ng Dgjpfx Anzjn - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Gbjdeu Ng Dtopfx Anzjn Machine is available for demonstration. *

Year of construction: 2022, condition: new, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm Gsdpfx Anjg N Nh Dezebn grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo outside of the machine of an already delivered one in similar scope. Other fotos from the origin machine. -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock Gbsdpfx Aexzk Nijnzsn NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, Gbodpfx Ansunt Eyezjn many accessories.

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Godeyb S Rcjpfx Anzjbn Control Kelco 80 weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: good (used), grinding diameter 450 mm grinding length 600 mm Gjdpfx Aoxcblqsnzobn centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: used, Year of construction: 1982, grinding diameter:250 mm grinding length:650 mm centre height:125 mm internal grinding spindle rev.-stepless:9500-50000 U/min workpiece speeds -stepless:50-10000 mm/min grinding head swivelling:90 Grad max. dia. of grinding wheel:400 mm spindle bore:30 mm grinding length - plunge feed:80 (100) mm max. grinding depth by internal grinding:ca. 170 mm max. bore diameter to be ground:90 mm feed speeds:240 mm/min max. workpiece weight:80 kg required cooling water:36 l/min centre distance:650 mm distance of workpiece spindle-taper cone:960 mm drive capacity - spindle motor:6,25 kW connected load:ca. 10 kW total power requirement:8,5 kW weight of the machine ca.:3,4 t dimensions of the machine ca.:3,9 x 2,5 x 1,85 m Gbedpjcxxubofx Anzjn with Studer control, electric/hydraulic drive, variable speed, tailstock with fine adjustment and hydraulic back feed, work piece headstock with increased precision, table air , hydraulic removable dressing device, radius-dressing device, Hydro-Cyclone filter, automatic grinding wheel-balancing device, automatic dressing cycle with speed compensation

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, grinding diameter:350 mm grinding length:1000 mm Gbedpjdmppqofx Anzsn centre height:175 mm workpiece weight:120 kg power capacity:5,5 kW turning speeds:max. 25000 U/min control:FMS 5-88 weight of the machine ca.:3,5 t precision grinding machine with SONY digital display, coolant system, electronic hand wheel, separate electrical cabinet, emergency cut-off

Condition: used, Year of construction: 2003, Technical details: grinding length: 1500 mm centre height: 325 mm weight of the machine ca.: 12 t Karstens EMAG H310 Universal Grinding Machine Gbedpfxjx Hgilj Anzon Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system *

Condition: used, Year of construction: 1999, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Gbedpfx Aey U N Hpsnzjn GENERALÜBERHOLT GENERALÜBERHOLT - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Godpfxsy U N Hij Anzjbn Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: used, Year of construction: 1989, Technical details: grinding diameter: 300 mm Gbsdpfx Asy Nk Hmenzon grinding length: 540 mm centre height: 175 mm total power requirement: 20 kVA centre distance: 1000 mm

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Misc. accessories Gbjdpfxey H Dq Hj Anzsn MARCELS MASCHINEN AG

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 600 mm Grinding wheel 400 x 40 x 127 mm Misc.accessories MARCELS MASCHINEN AG Gedpfx Asiu E Trenzjbn

Condition: refurbished (used), Machine totaly reconditioned With DRO Center height 175 mm Distance between centers 1000 mm Grinding wheel 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speeds 1'500-2'200 rpm With internal grinding attachement Misc. accessories Gedpswhk Uuofx Anzjbn MARCELS MASCHINEN AG

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE Gbodpfx Ansy Nmg Aszjn MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm PLUS HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: used, Year of construction: 1997, grinding diameter 350 mm Gjdpfxey R Ed Ns Anzebn grinding length 1000 mm centre height 175 mm weight of the machine ca. 6 t Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis C-Achse zum Polygonschleifen B-Achse mit Handschwenkung Schleifscheibendurchmesser links 400mm Schleifscheibendurchmesser rechts auf Anfrage Innenschleifeinrichtung Reitstock mit Feinverstellung

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Kelco 90 weight of the machine ca. 6 t Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis B-Achse stufenlos Schleifscheibendurchmesser links und rechts 400mm Innenschleifeinrichtung Reitstock mit Feinverstellung Sinuslineal am WSS Kel-Set Gbjdpfx Aey R Ed Aenzon Passive Lämgspositionierung Movomatic TMP91

Condition: used, Year of construction: 2026, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Komplett überholt mit Umbau auf Technik der modernsten Ausführung. -Neuer Schaltschrank -Modernes Hydraulikaggregat -Moderner Werkstückspindelstock -Moderner Reitstock mit Feinverstellung -Moderner Steuerblock,Zustellung,Getriebekasten -Innenschleifvorrichtung für Spindeln mit 80mm Durchmesser -Schwenkwinkelanzeige Schleifspindelstock -Schleifwinkelanzeige Obertisch -Luftabhebung Obertisch -Reitstock mit Feinverstellung -Sinuslineal -stufenlos regelbare Schleifspindeldrehzahl 70-100% -stufenlos regelbare Innenschleifspindeldrehzahl 70-100% Gedpfx Asy R Edvjnzebn -Auf Wunsch Umbau auf separaten Innenschleifspindelantrieb mit Kühlung und regelbarer Innenschleifspindeldrehzahl 0-100% -Spritzschutztüren z-Achse Optionen: Schwenkwinkelanzeige Werkstückspindelstock Schwenkwinkelanzeige Schleifspindelstock Schwenkwinkelanzeige Obertisch Teilraumverkleidung in X sowie Sonderwünsche

Condition: excellent (used), Year of construction: 2001, grinding diameter 350 mm grinding length 1000 mm centre height 180 mm Control Fanuc 180-T grinding wheel width 80 (100) mm grinding wheel diameter 450 mm power capacity - grinding motor 7,5 kW table speed -stepless- 10 m/min grinding spindle head - swivable ° turning speed range - workpiece spindle 10 - 800 U/min grinding head swivelling 0 - 15 ° workpiece weight max. 120 kg taper in tailstock-quill MK 4 tailstock quill stroke 35 mm voltage 400 V total power requirement 18 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,75 x 2,25 x 1,80 m band filter unit 1,75 x 1,20 x 0,80 m - Serial No.6769 Gjdpfx Anshkunxozjbn - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head