Used Vacuum Sanding Table for sale (20,832)

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Bcedpfx Agsxta Dys Njw Location: Supplier

Condition: used, Year of construction: 1983, Machine with digital readout. Including tool holders. Axe X: 1150mm Axe Y: 1000mm Axe Z: 600mm spindle diameter 100 mm table surface area 1000 x 1120 mm tool taper 50 SK turning speed range 4 - 1250 min-1 spindle stroke 630 mm main drive 20 kW feed range 1 - 4000 mm rapid travel range 4000 mm workpiece weight max. 3000 kg total power requirement 40 kW weight of the machine ca. 14 t Bcodpfx Agoymalfe Now dimensions of the machine ca. 6,9 x 3,6 x 3,3 m

Year of construction: 1997, condition: used, Number of sanding units 1 st. sanding width 140 mm Sanding height max. 120 mm LÖWER Molding Intermediate Sanding Machine Model LZ 2 For finishing and intermediate sanding of all types of moldings. Particularly fast processing thanks to simultaneous sanding of several moldings side by side. Conveyor belt feed with table extension under the sanding roller. 1 roller unit from above, working width 140 mm, table length 1100 mm, Workpiece thickness adjustment 2 - 120 mm with numerical display, Drive motor 2.2 kW at 1,430 rpm, mandrel 32 mm, Three feed speeds: 6, 12, and 16 m/min, Infeed contact, extraction ports 2 x 100 mm, Bcjdpfx Ageyn R Its Nsw Operating voltage 400 V, 50 Hz, 3 Ph, air connection 6 bar. NOTE VIDEO: Video NOT original. Shows machine type of the same model from our archive. (Technical data according to the manufacturer - without guarantee!)

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Bedexyafkepfx Ag Necw Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm Bcjdpexcbhrjfx Ag New 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Bcedjyngzvepfx Ag Njw Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20

Year of construction: 2022, condition: used, Number of sanding units 6 st. Bodpfsynnttox Ag Nocw Sanding height max. 120 mm output 12 kw

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C Bcodotqt Uxopfx Ag Njw The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm

Condition: used, Used dissolver by Drais (DE) model RN 3-45 AS VAC. Contact parts designed in carbon steel. Machine is designed for work on vacuum. Mixer has single shaft with working length 105 cm and toothed disc with diameter 690 mm. Shaft is driven by el motor 45 kW, 1460 rpm, 400/690 V, 50 Hz. Working rotation of shaft up to 600 rpm. Mixer has also side wall scrapper, driven by el motor 1.5 kW, 1410 rpm, 440 V, 50 Hz and gearbox. Working rotation of scrapper up to 26 rpm. Machine has top cover and mixing pan with total volume 2000 l. Mixing pan has internal diameter 1465 mm x length of straight side of wall 1160 mm. Mixing pan has two side wall discharge outlets with valves, and bottom supports for work with forklift. Dissolver is rised/lowered hydraulically. Rise up to 145 cm. Hydraulic pack is driven by el. motor 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Mixer is equipped with vacuum pump by Tepro (PL) and local control panel. Last time used in chemical industry. Bedpfxoykn U Nj Ag Nocw

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, table load: 4,200 kg, total height: 900 mm, total length: 5,000 mm, total width: 1,150 mm, table length: 5,000 mm, table width: 1,150 mm, workpiece weight (max.): 4,200 kg, T-channels table for: - welding - table boring machines - clamping plates Cast Iron T-Slot Floor Plate Bodpfx Agoyn I N Ij Necw Heavy Duty Machine Tool Table Boring Mill Clamping Table T-Slot Clamping Plate 5m Dimensions 5000 x 1150 x 900 mm Weight 4200 kg

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm Bedpfxjypcrye Ag Nocw -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 Bcodpfx Aeypci Sjg New -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Condition: excellent (used), Table saw with sliding table TKU 315 - 220 volts Bodpjypm I Sofx Ag Necw - Blade diameter: 315 mm - Year of manufacture: 1992 Subject to differential taxation

Condition: excellent (used), F45 Pro Drive - Year of manufacture: 2017 - Upper control panel - 3200 mm - Saw blade diameter: 500 mm - 5.5 kW - Scoring unit preparation Bjdpfjypmqaex Ag Nscw - Digital display on parallel fence - Cutting width 1100 mm to the right of the blade - Paper template holder - Angle display on cross-slide - Duplex mitre gauge

Condition: good (used), Year of construction: 2003, Double scissor lift table, lift table with double scissor mechanism, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: KAISER KRAFT, Scissor lift table type M2000 -Load capacity: 2000 kg Bcsdpfx Agoyn Rffj Nsw -Platform: 1000 x 2000 mm -Dimension when retracted: Height 805 mm (without feet) -Extended dimension: Height 3400 mm -Transport dimensions: 1000/2000/H1050 mm -Empty weight: 1245 kg

Condition: good (used), Year of construction: 2012, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 2.250/0-79 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 244 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/650/H750 mm Bcodjyn It Tjpfx Ag Now -Weight: 254 kg

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Bsdjxzi S Nspfx Ag Nocw Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: new, weight max. in kg 2000 kg table length 1300 mm Bsdpfx Aoxak Ipeg Necw stroke height 190-1010 mm table width 800 mm stroke of worktool slide 22 mm/sek. weight 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Condition: good (used), mileage: 1,53,950 km, power: 353 kW (479.95 HP), first registration: 06/2013, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 16 m³, Year of construction: 2013, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, - Aluminium fuel tank - Brake booster - High beam headlights - Speed limiter - Air conditioning - Leather interior - Leather upholstery - Air horn - Rotating beacon - Reversing camera - Sun visor - Stability control - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) Scania G480, 8x4, Euro 6, combination sludge/water vehicle with recycling unit, stainless steel tank, year of manufacture 2013 Further information: Engine: 480 HP Transmission: Opticruise (with clutch pedal) Suspension: air-air Mileage: 153,950 km Wheelbase: 3900 mm Emission standard: Euro 6 First registration: 13.06.2013 Electric windows and mirrors Air conditioning Reverse camera Navigation system Webasto (cab heater), engine pre-heater, etc. Last technical inspection at 150,600 km (07.02.2025) Last maintenance at 149,500 km The truck is in good and fully functional condition. Body: Wiedemann & Reichhardt, Super 2000 Remote control, sludge suction (stainless steel sludge tank 10,000 l), Wiedemann KW3000, speed: 1000, m3/h: 3000, vacuum: 400 bar (new vacuum pump, year 2020) Bcodpfxeyl Ncqo Ag New High-pressure flushing system with stainless steel water tank 6,000 l, URACA, Webasto Thermo 300... operating hours: 2,128 hours Recycler with 4 cyclones Overall assessment: General condition assessment (1-5): 4.5 Condition of front tires: 90% (or new tires at extra cost) Condition of rear tires: 90% (or new tires at extra cost) Additionally: All documents required for registration in all EU countries available (all from Wiedemann & Reichhardt and Scania). Price: € Stockholm, Sweden For further information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only to the purchase of this truck. * -----.

Condition: good (used), mileage: 4,72,700 km, power: 234 kW (318.15 HP), first registration: 01/1990, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,400 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space volume: 12 m³, Year of construction: 1990, = Additional options and accessories = Bsdpfsyl Nacex Ag Njcw - PTO (Power Take-Off) = Additional information = Applications: cleaning, land drainage, drainage and recycling Suspension: leaf suspension Front axle: Max. axle load: 8,000 kg; Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle: twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Technical condition: good Visual condition: average

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" Bsdpfxex Enrxo Ag Nocw 570353 Extension with roller track on the rip fence side 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400V EU 080685 Additional packaging 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, overall weight: 850 kg, rotational speed (max.): 5,000 rpm, table length: 3,100 mm, table width: 360 mm, machine/vehicle number: KK00034979, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Bodpfx Asynhkxog Njcw TECHNICAL DETAILS Table dimensions: 3,100 x 360 mm Speed range: 3,500 and 5,000 rpm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,000 x 4,000 x 1,700 mm Weight: 850 kg EQUIPMENT Digital measuring device up to 2,000 mm Extraction unit Note: The saw can be transported on a standard truck External reference: Groven - Lot 23

Condition: used, Year of construction: 2019, operating hours: 1,580 h, functionality: fully functional, total length: 1,100 mm, total width: 670 mm, total height: 1,440 mm, overall weight: 410 kg, power: 3.55 kW (4.83 HP), rotational speed (min.): 2,480 rpm, rotational speed (max.): 1,220 rpm, grinding width: 250 mm, The Bomar orbital 250 NS machine has served us well for edge grinding of profiles. However, as our production has changed, we no longer have use for it. The machine is ready for further use and available for immediate collection. We can arrange loading of the machine onto the customer’s transport. Bsdpfoyn Dyvjx Ag Njcw

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm Bedeiuld Dopfx Ag Necw weight: 180kg

Condition: new, Year of construction: 2025, table size: 3000mm x 1500mm pressure: -0,85 bar Bcedpeipv Nrsfx Ag Njw machine length: 3100mm machine width: 1450mm weight: 425kg