Used Various Accessories for sale (28,350)

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Fjdpfxew Ew D Dj Aatopl Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 694 kg, maximum load weight: 2,006 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 2006kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lamps with reversing light and triangle reflectors Fpjdpfx Aezz N Svjatol Upper frame mounted on rubber pads Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICES STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Black Edition (Powder-coated side panels and rims in black) - Integrated ramps, 2800kg capacity - 35cm side panels - Battery charger - Electric tipping control - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work on a tilted vehicle - Folding crank for rear supports - Complete LED lighting - Theft protection - Net, fine or coarse mesh - H-frame - Leaf guard in various heights, also closed - Extension side panels 30cm with tensioning latch - Flat cover with or without bows - High cover 160cm - 200cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 250 € net. Images are for illustrative purposes only and may show optional accessories at an additional cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravan trailers. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a wide range of rental trailers with us. Visit us online or come directly!

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Fpodpfx Aasy Dz T Tjtel

Condition: excellent (used), Item description: Assortment of SK40 tools, approximately 250 pieces, from Wohlhaupter, Komet, Granat, etc. ----- Item condition: The goods come from a company liquidation. Fodpszz Itfsfx Aatepl Condition: used Internal number: 26.528, 26.530, 26.531 & 26.532

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 Fpedsxnimtspfx Aatsl - Fully functional, powered, ready for demonstration - Grinding wheels Ø150 mm - Cross travel: 300 mm - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AB /139622, functionality: fully functional, input frequency: 50 Hz, pivoting range: 56 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,300 rpm, Equipment: CE marking, rotational speed infinitely variable, We are offering this well-maintained SCM T 150 Class spindle moulder, year of manufacture 2000. Description: Spindle moulder with 3-axis control and 999 program memory slots (spindle height, fence, spindle tilt, revolutions) Spindle tilt -10° to +46° Inverter motor, adjustable spindle speed from 3,300 to 10,000 rpm Table extensions at front and rear Swivelling fence Clearance between cutter and table is adjustable Very good condition, minor signs of use Including accessories: • 5 additional SK40 quick-change spindles • Curved fence • Power feeder with stand • Various hand tools If you have any questions or require further information, please feel free to send us a message or call us. Fedpoy Ir Ezsfx Aatepl

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Fodpfox Ry Atjx Aatepl Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: good (used), Year of construction: 1986, SOE reamer grinding machine with projection measuring device. Accessories: collets, various grinding wheels. In good, operational condition. Fpjdpoy Tuhvefx Aatol

Condition: excellent (used), Large inventory of electric motors Total 4 rows (2 single racks and 1 double rack (as shown in the attached photos)) AC and DC motors Mainly 500V motors Reconditioned and new motors For sale as a single lot Fpjdpfx Aaoyz R Egetol

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 352016, Schaublin CNC lathe, type 140-CNC A2-4, in excellent condition. Specifications: - FANUC control 21i-TB - Maximum turning diameter over the bed: 300mm - Spindle speed: 50-6000 rpm - Maximum bore of the main spindle: 39mm - 12-position VDI turret with live tools - Machine dimensions: 2530x1400x1840mm - Weight: 3020kg Accessories: - Coolant system Fpedpfx Aajzub Agstsl - Air filter system (mist collector) - 30 VDI 30 tool holders - 2 VDI 30 live tool holders - Various extras, see photos

Condition: excellent (used), For Sale: Silomat Pneumatic Conveying Systems / Silo Pumps (Gravity & Pressure Types) We offer a wide range of Silomat conveying systems from various brands for sale, available in both gravity (free-fall type) and pressure configurations. Fsdpfolf Niqjx Aatjpl All units have been completely OVERHAULED and professionally reconditioned: Oil replacement New composite vanes New bearings Professionally sandblasted and fully painted The machines are ready for operation and available for purchase either with brand-new accessories or without. Available Gravity / Free-Fall Models (approx. 40 units in stock): PFT E100L MALTECH MB100 M-TEC F100E Contact us for more details, pricing, and available configurations.

Condition: used, Year of construction: 2017, operating hours: 2,000 h, Used filling monoblock for Oil and spirits – Polaris model B6 – speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits; We summarize the main characteristics of our used filling monoblock; and which make them UNIQUE on the market: • Elasticity of work that allows you to switch from one bottle format to another. Acting with simple operations and without replacing parts of the machine; this flexibility is also particularly suitable for those who carry out the third party. • Speed ​​of the format change that can be carried out from 10 to 30 minutes at the most. Given the reduced times, the line can be easily used even for small production batches. • Use of any bottle format; cylindrical, square, triangular, amphorae, flasks, etc. from 0.100 to 2lt in glass and PET. • We designed our labeling system, in such a way as to guarantee the maximum laying precision, on each type of bottle. Lines B6 Can Be Composed By The Following Machine Parts: 10 place rinsing machines uses water from the aqueduct or recyclable liquid. (In this case you can add a recycling unit consisting of a pump) 5 micron filters and liquid storage tank. 10 place blow molding machines, as an alternative to the rinsing machine, if the bottle cannot be wet before filling. The blowing machine allows you to blow prepared air or nitrogen inside the bottle. 10 nozzle fillers. Depending on the type of product. Different types of filling can be used and specifically:  Vacuum in the bottle; (for oils, syrups, spirits or when you want a quick filling). By gravity, with initial slight depression (for wine or foamy liquids). Pressure (for PET bottles or for particular liquids). Automatic washing system inside the filler – Used filling monoblock POLARIS Leveler: which allows obtaining the legal content, It is possible to change the bottle format without changing the nozzle thickness. Capper that can apply various types of caps: screw, pressure, mushroom and Guala etc. To change the type of cap, it is necessary to change a capper accessory. Heat shrink or foil capsule dispenser. For the restriction of the retractable capsules, a restriction stove equip the line for the closure of the foil capsules, and mount rolling heads. Labeling machines for the application of self-adhesive labels on the front, back on the neck or other parts of the bottle. Operational heads for the application of fiscal seals both with paper and glue and self-adhesive L to U, side. Thermal transfer stamp for printing dates of reads and lot numbers on the back label or an ink jet marker, laser, can be applied. Fpodswa Tnzjpfx Aatel Accident prevention protections according to CE standards with doors or electronic barriers. All materials in contact with the product are for food use as per CE regulations. In addition, you can add other equipment to carry out further operations, such as: Equipment for other types of caps.

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. Fodjy Rzklopfx Aatjpl The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: excellent (used), Year of construction: 1975, center height in crank: 125 mm, grinding wheel diameter: 250 mm, The year of manufacture is estimated, but it is from the 1970s. Partially overhauled, geometry checked (within tolerance). TECHNICAL DATA Maximum height 125 mm Grinding diameter 250 mm Grinding length 750 mm Spindle power 3 kW Grinding spindle head Speed range 1500-2420 rpm Grinding wheel dimensions ø 400x50x127 mm Workpiece spindle head Speed range (stepless) 25 – 450 rpm Rotatable 90° Spindle taper MK 5 Tailstock Arbor mounting MK 3 Table feed (stepless) 100 – 6000 mm/min Maximum inclination 10° EQUIPMENT/ACCESSORIES  Tailstock with cross fine adjustment  Coolant system Fpjdpfjid Sqwox Aatel  Splash guard  1 flange with diamond grinding wheel  2 additional flanges  various mounting elements

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Fpodpfxotuuvzj Aatol Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, control type: CNC control, controller model: FSCUT, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 2,000 mm, working width: 1,000 mm, type of cooling: water, overall weight: 1,500 kg, Equipment: cooling unit, emergency stop, fume extraction, Z1313 CNC Fiber Laser – 3 kW – Year of manufacture 2023 – only 200 hours of operation – 2000×1000 mm – Private sale – €35,000 Description For sale is a Z1313 CNC fiber laser, manufactured in 2023, from a private owner. The machine has only been used privately, has approximately 200 hours of operation, and is in very good, fully functional condition. Ideal for metalworking, workshops, prototyping, small series production, and precise cutting work. Technical data Model: Z1313 Laser power: 3 kW fiber laser Working area: 2000 × 1000 mm Year of manufacture: 2023 Hours of operation: approx. 200 Condition: very good, ready for immediate use Fedpfx Aezrfryeatepl Control: CNC system including operating monitor Software: CypCut cutting software (FSCUT controller) DXF/AI/SVG import Automatic nesting Material library Height control (BCS system) Cooling: 3 kW chiller Extraction: available Control cabinet: complete Accessories: various tools, clamping devices, small parts Reason for sale: No longer needed Special features: Private sale → no VAT, no guarantee

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Fpsdpfx Aaezlhvuetjl Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Optical condition according to images. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Year of construction: 1987, condition: used, A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible. Fpjdpfx Aaezxhk Estsl

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 Fpjdpfswwkx Ejx Aatel • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Fodpfxezn I N Hj Aatepl Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 0112-196, type of input current: three-phase, total width: 115 mm, total length: 400 mm, total height: 100 mm, input voltage: 400 V, Petratto Mini Metro 78 modular folding and gluing system (2021), consisting of two identical modules. Fsdezp Nkuepfx Aatjpl The machine has been lightly used and is in excellent condition. It consists of two Mini Metro 78 modules, providing a flexible configuration for a wide range of folding and gluing applications. The system is equipped with various accessories and tooling for folding and gluing, making it suitable for the production of presentation folders, sleeves, wallets, envelopes, cartons and many other paperboard converting applications. The modular design allows different configurations depending on the job requirements. The machine has been well maintained, is fully operational, and is ready for production. It is being offered for sale only because we have had very limited demand for this type of work.

Year of construction: 2017, condition: used, This listing is for a Agilent Eclipse Fluorescence Spectrometer. The unit is in full working condition and is ready for immediate release. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Type:Benchtop fluorescence spectrometer Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Biolumi nescence,Time resolved phosphorescence. Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm Fpjdoxx Ax Rspfx Aatel

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,300 mm, total width: 1,400 mm, total height: 2,000 mm, Lithographic press, also known as a scraper press, for manual printing from lithographic stones. Used by artists for lithography, in schools, art academies, and museums. The machine was last used in the workshop of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 80 x 130cm. Also very interesting as an exhibit in a lobby, restaurant, etc., or for production. Fedpfx Aajx A H I Dstepl Many squeegees in various widths are included as accessories, as well as 4 different hand rollers with leather coverings for inking the stones. The wooden table needs minor restoration. Lithographic stones in various formats can also be supplied.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 404 mm, total height: 590 mm, total length: 556 mm, overall weight: 35 kg, table height: 100 mm, table length: 350 mm, table width: 170 mm, space requirement width: 404 mm, space requirement height: 590 mm, working height: 100 mm, space requirement length: 556 mm, working width: 350 mm, Professional Laser Engraving Machine Magic L3 30W - Great Opportunity! For sale is our high-quality Magic L3 laser engraving machine with a 30W fiber laser source. TECHNICAL DATA: • Model: Magic L3 30W (Red Technology) • Laser Type: 30W Fiber Laser • Original Price: 15,490 EUR (see manufacturer's website) • Working Area: 350 x 100 x 170 mm (W x H x D) • Engraving Speed: up to 4000 mm/s • Dimensions: 556 x 404 x 590 mm • Weight: approx. 35 kg ✅ CONDITION & USAGE: • Period of Use: February 2022 to September 2025 • Low Usage: Used only a few times per day for short periods • NO industrial continuous operation! • Well-maintained and fully functional • Automatic safety cover functions perfectly • Adaptive cooling system runs quietly and reliably IDEAL FOR: • Jewelers and goldsmiths • Engraving on gold, silver, stainless steel, aluminum, brass • Various engraving techniques: hatching, contour, blackening • Serial numbers, logos, texts, graphics SCOPE OF DELIVERY: • Magic L3 laser engraving machine • MagicArt 7 software (easy to use!) • Original accessories • Additional accessories available (see my other listings) ⭐ SPECIAL FEATURES: • Automatic safety cover (closes before laser operation) • Exhaust set connection available • Supports DXF, PLT, SVG, DGN, JPEG, PNG, BMP • Automatic number generation for series • Very low maintenance and long-lasting • German software interface possible PRICE: 8999 EUR (negotiable) A fair offer for a professional device in top condition! CONTACT & INSPECTION: • Inspection and demonstration possible by appointment • Pick-up only / Shipping by arrangement • VAT can be shown on request Fodoznnctopfx Aatspl If you are interested or have any questions, please contact me! Keywords: Laser engraving, fiber laser, engraving machine, jeweler, goldsmith, jewelry engraving, metal engraving, Red Technology, Ingraser, marking laser

Year of construction: 2020, condition: good (used), Well-maintained Leica DM IL LED Cellfactory inverted microscope, suitable for cell culture, phase contrast, and routine live-cell observation. Configuration: Fodpfxezhia Hs Aatopl HI PLAN 4x/0.10 PH0 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 40x/0.50 PH2 objective S40/0.45 Leica condenser (521251) HC C-mount 0.50x Slider HC Plan 10x/20 eyepiece(s) Flexacam C1 with remote control Various accessories A robust setup for laboratories, biotechnology, research, and cell culture applications.