Used Accessories for sale (23,733)

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 12,04,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller Dwslhcjzmh Awodw Aob - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: good (used), functionality: fully functional, Internal article number: 26059 Mechanic's lathe Weiler Dwjlhcdszx Tt Ssw Ajb Including an extensive accessory package + Four-jaw chuck Röhm 140 + Three-jaw chuck Röhm 140 + Collets "large" + Draw tube for tailstock (suitable for collet set "large") + Collet set "small" and draw tube for tailstock + Turret head + Parting tool support + Hand lever support with Multifix "A" base (installed) Speed adjustable via belt 2 speed stages Left-hand/right-hand rotation Dimensions (L x W x H): 120 x 50 x 125 cm Weight: 500 kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running on our heated storage area of over 500 m².

Condition: used, Year of construction: 2013, operating hours: 11,801 h, functionality: fully functional, total length: 4,500 mm, total width: 1,530 mm, total height: 1,100 mm, overall weight: 1,500 kg, We are offering this used Breuning IRCO SIMAC 50.1 bar feeder, manufactured in 2013. We have a bar loader available: Breuning SIMAG 50.1. Dwolheztqq Recdw Aeb It was previously connected to a TWIN 42 machine. Here are some details: Year of manufacture: 12/2013 Operating hours: 11,801.5 hours Accessories: Collets 14, 17, 32, 38, 46 If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2008, functionality: fully functional, For sale: a Knoll coolant filtration system. Technical data: Manufacturer: KNOLL Type: VRM 500 Design: Coolant/filtration system Application area: Machine tools / machining Suitable for processing chips and coolant Used machine Further technical data can be found in the images. Djlhcdezy Hxqsw Ajwb Condition: The machine is in used condition. An on-site inspection is possible by arrangement. Sale: Sale from the current location. Loading and transport can be arranged upon request. Errors, changes and prior sale reserved.

Condition: good (used), functionality: fully functional, Internal article number: 26052 Turning head Wohlhaupter UPA3 Mount: SK40 (S20x2 draw-in thread) Dwelhszx Skcscdw Aeb + Adapter to M16 draw-in thread + Wooden box with extensive accessories

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate available AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Frame B112FU IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature: 0-40°C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. Djlhcszq Atlsdw Aewb All technical data subject to typographical errors and errors. Sale exclusively to countries within the EU.

Condition: used, Year of construction: 1978, first registration: 06/1978, color: green, Equipment: trailer coupling, = Additional options and accessories = - Power steering = Further information = Odometer reading: 15,715 km Deloxdvqqohcdw Ajwb Drive: All-wheel drive Unladen weight: 3,950 kg Gross vehicle weight: 3,950 kg Manufacturer: Mercedes Benz, Mercedes Benzstrasse 100, 70372 Stuttgart, DE

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system Doljzzdh Ejhcdw Aowb - Oil skimmer - Preparation for a 4th axis - All original documentation.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, 2 pcs. used stainless steel trolley for loaders setters holder, MFG 2018; together with 12 pcs. aluminium with canvas made setters. The dimensions of the stainless steel trolley are: L 2.000 mm x W 600 mm x H 2.000 mm The dimensions of each belt is about: L 1.900 mm x W 560 mm Trolleys of such type are used to provide the fermentation process of dough batches placed on loaders. Made of stainless steel. All trolleys are produced on order. Two folding arms are installed for easy load. Very good condition. Price Euro 1.200 + VAT for each trolley with 12 setters, negotiable. Delivery condition, FCA: Oradea/Romania If you’ll buy both of them in package: price in Euro 2.000 + VAT, negotiable. Delivery condition, FCA: Oradea/Romania Dwolhcdweywculo Asb Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 610 mm, turning diameter: 350 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 650 mm, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,620 mm, total length: 2,750 mm, total width: 1,535 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 24 m/min, type of input current: three-phase, overall weight: 5,000 kg, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, This machine comes from a training organization and can be seen in operation at our location! Additional options & accessories: - Measuring arm - High-pressure coolant pump Dolszy Nc Eohcdw Aewb - Electronic handwheel - Various 25x25 mm and drill chucks - Foot pedal - 3-jaw chuck, Ø210mm - Original Feeler + FANUC documentation. Weight & dimensions: 5000 kg 2750x1535x1620 mm (LxWxH)

Condition: good (used), Year of construction: 2010, Hydraulic centering device, manufacturer: SMW AUTOBLOK, type: SLU-3.2, year of manufacture: 2010. Clamping range: 50 - 200 mm. Djlezy N N Eshcdw Aswb In good condition. Further data can be found in the data sheet.

Condition: good (used), Item description: Hofmann 4th axis RWNC - 160 from DMG DMU50T ----- Item condition: Dslezzkldehcdw Aowb The item comes from a company liquidation. Condition: used. Functional video available. Internal number: 26,564

Condition: excellent (used), functionality: fully functional, Reishauer NRK grinding machine with change gears Original change gear set with substructure, containing 50 ground change gears in the original wooden box. 26 loose change gears, including 2 with Z=63, 2 with Z=64, and 1 with Z=72, all original. All gears have ground teeth. The following accessories are also available: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (one incomplete) 9 new grinding wheel flanges Various new and unused grinding wheels Balancing arbor Thread rolling device Press roller grinding device Delhcdoza Dk Sew Ajwb Various cam disks/cam curves Grinding device, manufacturer: Landert Motoren Various oil nozzles Unused strip curtain/splash guard All technical specifications are subject to printing errors and omissions. Sale exclusively within EU countries.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand Canon POD Deck-E1 printing machine accessory. Item for sale: 1 x Canon POD Deck-E1 for the Canon imagePRESS V1350 Condition: This is a second-hand item, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Dolhcezxrnzodw Aewb Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges Dwelhcdezxn Nnsw Aeb - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Industrial quality German equipment Included Djlhcdwjzkam Ae Aewb Electric chain hoist Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft.

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Dolhszxqhyocdw Aewb Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: excellent (used), FARO Gage Plus F4 3D Coordinate Measuring Arm Manufacturer: FARO Model: Gage Plus F4 Machine Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 For sale is a used FARO Gage Plus F4 3D coordinate measuring arm with CAM2 SmartInspect Pro software and a comprehensive range of measuring, tooling, and accessories. This mobile measuring arm is suitable for industrial measuring and testing tasks, quality assurance, as well as the acquisition and control of component geometries. Technical Data: Model: Gage Plus F4 Device Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 Accuracy Specification: 5 + 8L/1000 µm Certification Date: 12.06.2019 Country of Manufacture: Switzerland Software: FARO CAM2 SmartInspect Pro Software key as shown in the images USB stick as shown in the images Equipment: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the images Measuring and probing accessories as shown in the images Tool and accessory case FARO protective cover Documentation / documents as shown in the images Additional accessories as shown in the images Dimensions: Dimensions of the measuring arm: not clearly specified Transport Data: Transport dimensions: not clearly specified Weight: not clearly specified Shipping or freight forwarding possible Condition: Used Optical condition as shown in the images. Nameplate present. Dolhjzxy Sbjcdw Aewb Scope of delivery: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the images Tool and accessory case Measuring and probing accessories as shown in the images FARO protective cover Documentation / documents as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2006, Equipment: CE marking, We offer a used laser source from a Trumpf TruWeld laser, for example, suitable for use as a source of spare parts. Dwolhozyl Auocdw Aeb

Condition: good (used), functionality: fully functional, Manufacturer unknown Type: 211 – 25/26 No. 89899 Power: 220V Table length: 250 mm Djlhcdozzlm Njw Aowb Table width: 260 mm Height: 135 mm Weight approx. 25 kg .

Condition: good (used), functionality: fully functional, Manufacturer: HOFMANN Type: NG-1 Machine No.: 922472 Delhcdjzzlnmsw Aewb Max. disc diameter: 320 mm Max. loading weight: 20 kg

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: Dwjlszyq Ebohcdw Aeb approx. 10,000 kg

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 10/1992, total width: 2,440 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,810 mm, Year of construction: 1992, = Additional Options and Accessories = - Lift axle - Air suspension - Drum brakes = Remarks = Groenewegen 1992, flat 40-foot swap chassis with ROR axles and drum brakes, non-extendable, suitable for 1 x 40ft / 2 x 20ft / 1 x 20ft central / 1 x 30ft containers; first axle is a lift axle, unladen weight: 5,660 kg, gross vehicle weight: 36,000 kg, tires: 385/65-R22.5 (Tread depth: L: 7/9/9 mm; R: 10/12/12 mm), Dutch registration = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle manufacturer: ROR DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 8,000 kg; Left tire tread: 45%; Right tire tread: 60% Rear axle 2: Max. axle load: 8,000 kg; Left tire tread: 55%; Right tire tread: 75% Rear axle 3: Max. axle load: 8,000 kg; Left tire tread: 55%; Right tire tread: 75% Weights Unladen weight: 5,660 kg Payload: 30,340 kg Gross vehicle weight (GVW): 36,000 kg Functional Body make: Groenewegen 40.05CC-12-24 Condition Technical condition: good Visual condition: good Dwolhcdsxui Ahsw Aob Identification Registration number: OB-28-ZK Additional Information Please contact Arne Honingh for further details.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 235.1068, Title: Komax Kappa 235 Automatic Wire Cutting and Stripping Machine – 2006 Description: For sale: Komax Kappa 235 automatic wire cutting and stripping machine, manufactured in 2006. Dwolhcozzpxcjdw Aob The machine is suitable for cutting and stripping a wide range of cables and wires. Technical specifications: Manufacturer: Komax Model: Kappa 235 Year of manufacture: 2006 Voltage: 115/230 V Wire cross-section range: 0.22–35 mm² Flat cable processing: up to 40 mm width RS232 interface Cutting and stripping functions Extensive accessories and spare parts are included: Numerous cutting and stripping blades / knife sets V-blades Various blade holders Elastomer feed rollers Additional steel knurled feed roller set Various cable guides Guide tubes Inner-wire stripping unit Length measuring unit Additional mechanical parts and accessories Various original Komax spare parts A considerable quantity of tooling, blades, rollers, and spare parts is supplied with the machine, as shown in the photos.

Condition: ready for operation (used), functionality: fully functional, Sliding table / drilling table / clamping table with quick adjustment Dwelhjzzp N Uscdw Asb -Type 6000 RO -Table dimensions L x W x H: 1 x 0.5 x 0.2 meters / Weight approx. 75 kg Errors and omissions excepted.