Used Vdf Dus 560 for sale (2,348)

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm Nwodpfxjfmd Dhj Ac Ajd MARCELS MASCHINEN CH

Condition: new, sheet length: 2560sheet thickness: 4messurements (LxWxH): 3200 x 2250 x 1400motor: 7,5weight approx.: 3500Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale Nwjdpfogickvsx Ac Asd 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 1560sheet thickness: 5messurements (LxWxH): 2250 x 2250 x 1400weight approx.: 2500motor: 7,5Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms Nsdpfogicknsx Ac Ajwd 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 2560sheet thickness: 2,5Standard Accessories: NC control Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pc. squaring arm with scale 2 pcs. sheet support arms 1 additional sheet support arm  Nwedpogiclasfx Ac Asd Finger protection Ball transfer table Easy blade gap adjustment from the front Ballscrew Stroke (cut) counter Portable foot pedal with emergency stop button Photocell on the rear safety guards

Condition: new, sheet length: 1560sheet thickness: 5messurements (LxWxH): 2250 x 2250 x 1400Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Nodpfx Aogick Isc Ajwd Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm Nedpfx Asyxqk Doc Aewd adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Cutting tools not come. Njdpfxerpk Rms Ac Ajwd

Condition: used, Year of construction: 1971, machine/vehicle number: 1047 0885, height of centers: 330 mm center distance: 1500 mm max. circulation-Ø over bed: ueber Bett 690 mm spindle boring: 82 mm spindle retainer: Kurzkegel Gr. 8 retainer taper tailstock: 6 MK spindle speed: 7,1 - 1400 rpm forwarding feed: laengs/plan 0,05-112/0,025-56 mm/U Nedpobbk Exjfx Ac Ajwd thread pitch: 0,25 - 560 mm electrical connection: 380 V, 15 kW space needed: 3350 x 1800 x 1400 mm weight: 4800 kg

Year of construction: 1958, condition: used, machine/vehicle number: 800116 1387, height of centers: 180 mm center distance: 1500 mm max. circulation-Ø over bed: ueber Bett 380 mm spindle boring: 50 mm spindle retainer: Gr. 6 retainer taper tailstock: 5 MK spindle speed: 33,5 - 1500 rpm forwarding feed: laengs/plan 0,004-1,05/0,001-0,35 mm/U thread pitch: 0,25 - 96 mm electrical connection: 380 V, 2,6/3,7 kW space needed: 3470 x 950 x 1240 mm weight: 1670 kg Nwedpfx Aodbp D Ujc Aod

Condition: used, Year of construction: 1971, height of centers: 265 mm Njdpfjurirdex Ac Aswd center distance: 1500 mm max. circulation-Ø over bed: über Bett 540 mm spindle boring: 65 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 9 - 1800 rpm forwarding feed: längs/plan 0,063-2,24/0,032-1,12 mm/U thread pitch: 0,35 - 560 mm electrical connection: 380 V, 11 kW space needed: 4580 x 1250 x 1330 mm weight: 3200 kg

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Nwsdpfx Acjw Rdthj Aod Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Nsdpfxjtttige Ac Aowd Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: used, Year of construction: 1982, Center height: 400 mm Nsdpsvzn Itjfx Ac Aewd Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: excellent (used), Year of construction: 1984, Centre height: 180 mm Centre distance: 1000 mm Swing diameter over bed: 350 mm Swing diameter over cross-slide: 200 mm Bed width: 255 mm Spindle bore: 36.5 mm Spindle mount DIN 55027: Size 5 Spindle speed range, 14 steps: 28 – 2500 rpm Feeds, 9 longitudinal: 0.04 – 0.4 mm/rev Nwsdpfxoyud Ito Ac Ajd Feeds, 9 cross: 0.02 – 0.2 mm/rev 38 Metric threads: 0.2 – 18 mm 35 Whitworth threads: 76 – 2" 31 Module threads: 0.4 – 13.5 module 25 Diametral pitch threads: 36 – 2.6 DP Tailstock taper: MT 4 Drive power: 3 kW Machine dimensions (L x W x H): 2350 x 850 x 1800 mm Weight: 1300 kg Accessories / Special features: • 2-axis digital readout EASSON ES-8A • 3-jaw chuck • Quick-change toolholder system "Multifix" size B • Safety chuck guard, hinged, electrically interlocked • Coolant system Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 480 mm, spindle bore: 103 mm, turning length: 2,000 mm, turning diameter: 520 mm, turning diameter over bed slide: 520 mm, three-jaw chuck diameter: 400 mm, spindle diameter: 110 mm, workpiece length between centers: 2,000 mm, CNC: Siemens Sinumerik 840 D Swing over bed: 520 mm Permissible swing over carriage: 480 mm 12-position turret Speed range: 7-2800 rpm Nwedpfx Aoyxv D Njc Ajd Distance spindle nose to faceplate: 2171 mm Maximum turning diameter: 520 mm Maximum turning length: 2000 mm X axis: 405 mm Z axis: 2049 mm Spindle speed: 7-3000 rpm Spindle bore: 103 mm Spindle nose: A11 No tailstock.

Condition: good (used), Bezel, steady rest, lynette Nwedow A Ni Topfx Ac Aod -Bezel: max. opening Ø 170 mm -Centre height: 325 mm -Support: ball bearing -technical drawing: in the photos -Dimensions: 520/260/H590 mm -Weight: 77 kg

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 rapid traverse 10 m/min Nsdpfxovy Ig To Ac Aswd Working speed 0,1 - 10.000 mm/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe VDF BOEHRINGER - VDF 315 Cm / DL 2000 - incl. 2x Workbench

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Nwodpfxjwlap Ae Ac Ajd Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: good (used), Year of construction: 2024, Ref. -No.: 10605 Manufacturer: VDF WOHLENBERG Type: E 1000 Year of construction: 2024 Type of control: CNC Control: Sinumerik Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX Turning Diameter Over Bed: 1500 mm Nedsym Nd Djpfx Ac Aswd Turning Diameter Over Slide Rest: 1150 mm Centre Height: 750 mm Centre Distance: 9000 mm Faceplate Diameter: 1000 mm Spindle Bore: 80 mm Spindle Speed Min.: 1,4 - 280 RPM Turning diameter over cross slide: 800 mm Swing diameter over cross slide: 800 mm Space requirement: 13000 x 2650 x 2250 mm Power Capacity: 320 kW Weight Of The Machine Ca.: 8 t Max. turning diameter (in the offset): 2000 mm Size of the inner cone: metr. Kegel 1:20 quill cone: 80 O Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment. Nwjdpfxsym Nbij Ac Aod

Condition: excellent (used), turning diameter over bed 900 mm turning diameter over slide rest 600 mm turning length 3000 mm spindle turning speed range 11,2 - 560 U/min Nedpfeym D H Tjx Ac Ajwd tool holder Multifix D1 total power requirement 22 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 5,6 x 1,8 x 1,7 m Safety-related conversion according to CE standard 2017 2011 new plan pull spindle, lock case partially renewed, lubrication according to internal plan

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT Nsdpfswp S Sqox Ac Aswd with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: excellent (used), Technical details Swing diameter over cross slide: 940 mm Turning diameter: 1,260 mm Speed (min.): 8 rpm Speed (max.): 900 rpm Overall height: 1,800 mm Overall length: 3,500 mm Overall width: 2,440 mm Three-jaw chuck diameter: 500 mm Nsdpfx Aeyr Sx Iec Aowd Centre distance: 3,500 mm Offer details VDF Wohlenberg V1180 Centre distance: 3,500 mm 3.5 - 710 rpm 71 - 900 rpm Chuck: 500 mm diameter

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Nwodpfx Asxz Rfkjc Asd Spindle mount: DIN 55027 size 5 Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1972, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Rotation diameter over bed: 500 -Turning diameter over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x bezel, 7x Multifix tool holders, see photos -Dimensions: 1180/3050/H1345 mm -Weight: 1907 kg Nedpfx Ajw Sxgxjc Aswd