Used Vertical Injection Molding for sale (9,739)

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 161-750 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 161-750 PX Year of manufacture: 2019 Machine type: Electric injection molding machine for plastics Clamping force: 1600 kN / 160 tons Screw diameter: 60 mm Injection unit: SP 750 Machine description We offer a KraussMaffei KM 161-750 PX injection molding machine, manufactured in 2019, with a clamping force of 1600 kN (160 tons), equipped with an SP 750 injection unit and a 60 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 1600 kN / 160 tons Mold opening force: 240 kN Column spacing (H × V): 585 × 535 mm Mold opening stroke: 450 mm Minimum mold height: 200 mm Maximum mold height: 500 mm Maximum distance between platens: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 33 / 16 kN Bjdpfj Ahxzfjx Aiajlp Maximum mold weight: 2000 kg Injection unit SP 750 Screw diameter: 60 mm L/D ratio: 21.3 Maximum injection pressure: 1564 bar Injection volume: 475 cm³ Injection weight: 432 g Injection speed: 125 mm/s Volumetric injection rate: 297 cm³/s Screw speed: 458 rpm Installed heating power: 18.0 kW Nozzle pressure force: 42 kN General data Drive power: 20.0 kW Dry cycle time / stroke according to EUROMAP 6: 1.9 s / 410 mm Oil tank capacity: 200 l Dimensions and weight Length: 6400 mm Width: 1990 mm Height: 2010 mm Machine weight: 10,200 kg / 10.2 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 80-380 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 80-380 CX Year of manufacture: 2019 Machine type: Hydraulic injection molding machine for plastics Clamping force: 800 kN / 80 tons Screw diameter: 40 mm Injection unit: SP 380 Machine description We offer a KraussMaffei KM 80-380 CX injection molding machine, manufactured in 2019, with a clamping force of 800 kN (80 tons), equipped with an SP 380 injection unit and a 40 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 800 kN / 80 tons Mold opening force: 55 kN Column spacing (H × V): 420 × 420 mm Mold opening stroke: 500 mm Minimum mold height: 250 mm Maximum distance between platens: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 23 / 10 kN Maximum mold weight: 1000 kg Injection unit SP 380 Screw diameter: 40 mm Bsdpfxe Ahxv Eo Aiaslp L/D ratio: 20 Maximum injection pressure: 2101 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 100 mm/s Volumetric injection rate: 126 cm³/s Screw speed: 295 rpm Installed heating power: 10.9 kW Nozzle pressing force: 50 kN General data Pump drive power: 15 kW Dry cycle time / stroke according to EUROMAP 6: 1.7 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Length: 4090 mm Width: 1480 mm Height: 2020 mm Machine weight: approximately 3500 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 44,561 h, functionality: fully functional, machine/vehicle number: 173072, clamping force: 3,000 kN, screw diameter: 55 mm, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Engel Type: VC 1350/300 spex plus Viper 12 Robot Serial number: 173072 Year of manufacture: 2009 Operating hours: 44,561 h Control system: CC200 Fully functional Condition: very well maintained Machine comes from a German first owner Extras: - Handling system Viper12 (z-axis 2240 mm, x-axis 600 mm, y-axis 1200 mm) - Core puller: 1x - Mounting plate, vertically enlarged - Mounting plate, standard centering 160 mm - Approved for use up to 350°C - Nozzle control, 1-fold hydraulic - Injection unit, swiveling - Screw S8, highly hardened, wear-resistant / for thermoplastics - Screw length L/D20 - Hydraulic system HV1 for sequential motion sequence - Interface for color dosing - 4 sockets 10A/16A, mold closing side - Interface for ejector locking - Interface for potential-free contacts - Freely programmable, 4x digital output Injection unit: Screw diameter: 55 mm Injection weight: 570 g/shot Injection pressure: 1763 bar / increased to 2183 bar Injection volume: 618 cc Clamping unit: Clamping force: 300 tons / 3000 kN Tie bar distance: tie-barless Mounting plates: 1100 x 700 mm (h x v) Tool opening stroke: 900 mm Tool installation height: 400 mm Max. distance between platens: 1300 mm Ejector force: 90 kN Clamping unit: hydraulic Bodpsz Ng Rwsfx Aiaelp Weight: 19,400 kg Dimensions: 7.06 x 2.13 x 2.45 m ✅ Available immediately from our warehouse in Hanover/Germany or delivered to your location against reimbursement of freight costs. Worldwide delivery possible. The machine is in our sole ownership. ✅ The requested machine is now available in our warehouse in Hanover and is offered after functional testing and can be inspected while powered. For information about the machines we offer and our company: - We only sell machines that we have purchased ourselves from current production and that are stored in our Hanover warehouse. - All offered machines are checked and tested before dismantling. - We do NOT sell insolvency goods. - We are NOT an intermediary that trades with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be inspected in our warehouse.

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Blodpfjz Ipqpsx Aiasp Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 Bodjzzv Tgspfx Aiaslp • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Bodpfxsz Ipyks Aiajlp Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 50-180 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 50-180 CX Year of Manufacture: 2019 Machine Type: Hydraulic Injection Molding Machine Clamping Force: 500 kN / 50 tons Screw Diameter: 30 mm Machine Description Bsdpfx Aie Ahxuyoaslp We offer a KraussMaffei KM 50-180 CX injection molding machine, manufactured in 2023, with a clamping force of 500 kN (50 tons), equipped with an injection unit featuring a 30 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 500 kN / 50 tons Mold Opening Force: 40 kN Column Spacing (H × V): 370 × 370 mm Mold Opening Stroke: 400 mm Minimum Mold Height: 200 mm Maximum Distance Between Platens: 600 mm Ejector Stroke: 100 mm Ejector Force (forward / backward): 23 / 10 kN Maximum Mold Weight: 630 kg Injection Unit Injection Unit Type: SP 180 Screw Diameter: 30 mm L/D Ratio: 23 Maximum Injection Pressure: 2025 bar Injection Volume: 85 cm³ Injection Weight: 77 g Injection Speed: 120 mm/s Volumetric Injection Rate: 85 cm³/s Screw Speed: 365 rpm Heating Power: 8.0 kW Nozzle Clamping Force: 50 kN General Data Pump Drive Power: 11 kW Dry Cycle Time / Stroke according to EUROMAP 6: 1.2 s / 259 mm Oil Tank Capacity: 180 l Dimensions and Weight Length: 3530 mm Width: 1410 mm Height: 1960 mm Machine Weight: approximately 2600 kg

Condition: good (used), Year of construction: 1999, clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection molding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Machine weight: 12,500 kg CE marking: present 2 units available WITHOUT LINEAR ROBOT! Bjdpoytnnzsfx Aiajlp Further information available upon request.

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Bjdpez Iqt Eofx Aiaelp Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Bjdpfx Aie Afaqbsaelp Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m Blsdpjz Iquvjfx Aiajp All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: as good as new (ex-display), Year of construction: 2023, KraussMaffei KM 50-100 PX Injection Molding Machine Year of Manufacture: 2023 Manufacturer: KraussMaffei Model: KM 50-100 PX Type: Electric injection molding machine with a servohydraulic system Bodps Ahxtxefx Aiaelp Clamping force: 500 kN / 50 tons Control system: KraussMaffei MC6 Screw diameter: 22 mm Machine Description We offer a KraussMaffei KM 50-100 PX injection molding machine with a clamping force of 500 kN (50 tons), equipped with a modern, 5-point, knee-joint clamping system with servoelectric drive. The machine features a servoelectric drive for injection and plasticizing, as well as a servohydraulic drive for the injection unit's movement. The KraussMaffei MC6 control system, based on an industrial computer with real-time Ethernet communication technology, ensures precise control of the injection molding process. TECHNICAL DATA Clamping Unit Clamping force: 500 kN (50 tons) Mold opening force: 75 kN Clamping system: 5-point, double knee-joint system, 3-plate Clamping drive: servoelectric Mounting plate dimensions (H × V): 490 × 440 mm Column spacing (H × V): 370 × 320 mm Mold opening stroke: 300 mm Minimum mold height: 150 mm Maximum mold height: 450 mm Maximum clearance between plates: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 17 / 8 kN Injection Unit Screw diameter: 22 mm L/D ratio: 22.7 Maximum injection pressure: 2500 bar Injection volume: 38 cm³ Injection weight: 35 g Injection speed: 125 mm/s Volumetric injection rate: 48 cm³/s Maximum screw speed: 382 rpm Plasticizing rate: 6.0 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Plasticizing system for thermoplastics Electrical and hydraulic equipment Control system: KraussMaffei MC6 Connected power (according to specifications): 6.1 kW Electrical protection: 63 A Installed heating power: 6.3 kW Number of adjustable heating zones in the cylinder: 4 Dry cycle time / stroke according to EUROMAP 6: 1.1 s / 259 mm Oil tank capacity: 120 l Dimensions and weight Length: 4200 mm Width: 1440 mm Height: 1850 mm Machine weight: 4000 kg (4 tons)

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m Bsdpez Ip Smsfx Aiaelp All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Bsdpfjy Snapex Aiaolp Ausstattung: .Kernzug -Roboter

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Vertical injection molding machine with rotary table – complete maintenance history (documented annually) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control: CC 200 Language: German, English Fully functional Condition: very well maintained Machine comes from a German first owner xxxxx without the depicted peripheral devicesxxxxx Extras * Light grid / light curtain * Freely programmable inputs and outputs * 9 freely programmable inputs can be programmed depending on the station * 9 freely programmable outputs * Handling interface Euromap 67 * Charge amplifier for internal pressure-dependent pressure switching, including the corresponding graphics pages * 3 potential-free monitoring inputs for monitoring peripheral devices such as temperature controllers * Euromap 63 interface for connection to a machine data acquisition system * Hot runner control / shut-off nozzle control * Complete maintenance log * Language: German - English Injection unit Screw diameter: 30 mm Injection weight: 89 g/PS Injection pressure: 1451 bar / increased 2205 Injection volume: 99 ccm Clamping unit Clamping force: 70 tons / 700 kN Diameter of rotary table: 1200 mm Opening stroke: 305 mm Ejection stroke / force: 105 mm / 20.1 kN Clamping unit: fully electric - Available immediately and can be loaded free of charge onto the buyer's truck at our warehouse in Hanover/Germany Bledjy Ir Nyspfx Aiajp or free delivery to your location against reimbursement of freight costs – worldwide delivery possible - The machine was tested before disassembly - The machine is our sole property - The requested machine is available immediately in our warehouse in Hanover and is offered in working condition and can be inspected under power. For information about the machines we offer and our company: - We only sell machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are inspected and tested before disassembly. - We do NOT sell insolvency goods - we are NOT an intermediary that deals with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: as good as new (ex-display), Year of construction: 2021, KraussMaffei KM 160-750 PXA Injection Molding Machine Manufacturer: KraussMaffei Model: KM 160-750 PXA Year of Manufacture: 2021 Machine Type: Electric Injection Molding Machine Clamping Force: 1600 kN / 160 tons Screw Diameter: 50 mm Control System: KraussMaffei MC Agile Robot: KraussMaffei LRX Machine Description We offer a KraussMaffei KM 160-750 PXA injection molding machine, manufactured in 2021, with a clamping force of 1600 kN (160 tons), equipped with a KraussMaffei LRX linear robot. Bljdpj Ahxyhofx Aiaep The machine features a 5-point, double-toggle clamping unit with a three-platen design, with servo-electric driven axes. The injection unit is equipped with electric drives responsible for injection, plasticizing, and the movement of the injection unit. The modern KraussMaffei MC Agile control system utilizes real-time Ethernet technology, enabling precise control of the production process. The machine is equipped with a complete plasticizing unit with a 50 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 1600 kN / 160 tons Mold Opening Force: 240 kN Clamping System: 5-point, double-toggle, three-platen design Clamping Drive: servo-electric Mounting Plate Dimensions (H × V): 770 × 720 mm Column Spacing (H × V): 570 × 520 mm Mold Opening Stroke: 450 mm Minimum Mold Height: 300 mm Maximum Mold Height: 600 mm Maximum Daylight Between Platens: 1050 mm Ejector Speed: 300 mm/s Injection Unit Screw Diameter: 50 mm L/D Ratio: 20.2 Maximum Injection Pressure: 1892 bar Injection Volume: 393 cm³ Injection Weight: 357 g Injection Speed: 200 mm/s Volumetric Injection Rate: 393 cm³/s Screw Speed: 267 rpm Plasticizing Rate: 36.5 g/s Nozzle Radius: 10 mm Nozzle Orifice Diameter: 4 mm Injection Drive: electric Plasticizing Drive: electric Injection Unit Movement Drive: electric Electrical Equipment Control System: KraussMaffei MC Agile Connected Power: 31.2 kW Installed Heating Power: 15.5 kW Number of Adjustable Cylinder Heating Zones: 5 Dry Cycle Time / Stroke according to EUROMAP 6: 1.86 s / 399 mm Linear Robot Manufacturer: KraussMaffei Series: LRX Type: Linear robot for injection molding machine service Application: Automation of part removal and handling Machine Dimensions and Weight Length: 5650 mm Width: 1820 mm Height: 1950 mm Net Weight: 8500 kg / 8.5 t

Condition: excellent (used), Year of construction: 2019, 5x Dr. Boy injection moulding machines for sale We are offering five Dr. Boy injection moulding machines from different production years and with different operating hours: BOY 35 E VV — Year 2019 — 17,968 operating hours BOY 35 E VV — Year 2013 — 18,913 operating hours With integrated hot runner temperature control unit BOY 35 E VV — Year 2010 — 18,197 operating hours BOY 35 M VV — Year 2009 — 31,617 operating hours BOY 35 E — Year 2014 — 35,099 operating hours Further information, technical specifications and additional photos can be provided upon request. All additional equipment associated with the machines is also available upon request. Bljdpfxsz Drf Io Aiajp Interested buyers are welcome to contact us for further details or to arrange a viewing.

Condition: used, Year of construction: 1998, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Bledpfx Ao Agkd Eeiasp You can find this and many other items on our platform.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Bsde Adrrzopfx Aiaolp Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Bodpfx Aisz Iq E Usaelp Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Bsdpsz Tiwhefx Aiaelp Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: excellent (used), Year of construction: 2024, ENGEL DUO 36060/2700 TECH INJECTION MOLDING MACHINE Year of manufacture: 2024 Clamping force: 27,000 kN (2700 tons) Robot: ENGEL VIPER 90 CLAMPING UNIT Clamping force: 27,000 kN Mold opening stroke: 3300 mm Bsdpfxjz N Et Dj Aiaelp Maximum mold opening distance: 4100 mm Minimum mold height: 800 mm Maximum mold height: 2200 mm Column spacing (H × V): 2180 × 1750 mm Platen dimensions (H × V): 2970 × 2640 mm Opening force: 770 kN Opening force with hydraulic cushion: 1600 kN Dry cycle time (EUROMAP 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Injection volume: 24,100 cm³ Theoretical injection weight (PS): approx. 21.9 kg Injection rate: 2620 cm³/s Injection pressure (regenerative mode): 1300 bar Maximum injection pressure: 1600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Torque at maximum speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s INJECTION NOZZLE Nozzle stroke: 1300 mm Nozzle closing force: 210 kN EJECTION SYSTEM Ejector stroke: 400 mm Ejector forward force: 420 kN Ejector return force: 420 kN HEATING SYSTEM Number of heating zones (including nozzle): 12 Installed heating power: 160.9 kW DRIVE AND HYDRAULIC SYSTEM Installed motor power: 355 kW Motor power for charging pump: 3 kW Hydraulic oil tank capacity: 3500 l COOLING SYSTEM Required cooling capacity: 66.9 kW Water consumption (supply temperature 32°C): 5.88 m³/h ADDITIONAL EQUIPMENT Linear robot: ENGEL VIPER 90 Movable / pull-out guide column Hot runner control: 160 zones Hydraulic core control: 3 + 3 Cascade control: 72 channels

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Bodsz Ipltspfx Aiajlp Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm • Control system: NC5 / CDIAS Bljdpfx Ais Aggumoasp • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Bljdpfxo Aa Ad Te Aiaop Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.