Used Vertical for sale (7,543)

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Cjdpeyhlfmofx Afpjgn Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap – Automatic lubrication system

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, overall weight: 14,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. Cedpfxjyg Ayxo Afpegn FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2026, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. Cgsdpewnp Akefx Afpon For more information please call us.

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. Cgjdpfxsxryafo Afpjn This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Cjdpfxsq U A Hus Afpsgn

Condition: new, Year of construction: 2025, table width: 450 mm, table length: 900 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, number of spindles: 1, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Cgedpjxc I Dgjfx Afpen Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: used, Vertical insulated tank 100m³ Cgsdpfx Aoxl Th Nofpen Diameter 3.85m Height 11.25m The tank is insulated with mineral wool It is lined with trapezoidal sheet metal It has space for a side agitator The tanks are dismantled, ready for loading.

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet Cgsdpfxshr Rp Ss Afpsn lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Condition: good (used), Vertical steel tank 60,000l diameter 2.82 m total height 11 m Cgsdpfxstwwv Ns Afpjn a hatch at the top of the upper floor and at the bottom on the side of the cylinder. Each tank can be painted with epoxy resin coat, or sold sandblasted (no coat). 12 units available

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Db-6 v Description: VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Cgodpfx Afsfd Rxqepen Year: 1977

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm Cgjdpfxoxpqm Rs Afpon C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. Cjdpfx Aswnx H Eofpogn As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: defective spare-parts repository (used), Year of construction: 1991, functionality: not functional, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, table width: 380 mm, table length: 925 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 350 mm Table size: 925 mm x 380 mm Spindle taper: SK 40 Spindle speed: up to 6,000 rpm Drive power: 11 kW Tool changer capacity: 20 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,600 x 2,100 x 3,000 mm Machine weight: approx. 3,600 kg Note: The machine no longer starts. It is being sold for spare parts. Cgodpfxjyf Ac Do Afpon

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 102, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Turning height: 1,250 mm Workpiece weight: 8,000 kg Turning diameter: 1,550 mm Faceplate diameter: 1,250 mm Faceplate speed: 200 rpm Spindle speed: 3,000 rpm Tool changer: 15 positions MACHINE DETAILS Control: Siemens 840 D Type of supply current: Alternating current (AC) Year of last overhaul: 2000 EQUIPMENT C-axis Infinitely variable speed Cjdpfx Afoybbi Iepjgn 3-jaw hydraulic-mechanical chuck Coolant system Belt filter unit Internal coolant supply

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 550 mm Cgodsyf E Szopfx Afpen Travel Z-axis: 500 mm Milling spindle (BT40): 12,000 rpm MACHINE DETAILS Control unit: Siemens 828D Operating hours: Power-on hours: 26,247 h Spindle hours: approx. 400 h (total 4,727 h) EQUIPMENT - Active electrical cabinet air/air cooler - Network connection - USB interface - Spindle chiller - Side windows left and right for large components - Safety cabin with armoured glass - Coolant pump at spindle - Pump for chip flush device - Air at the spindle via M-code function - Operating status light - Oil separator - Electronic handwheel - ICS system (internal coolant supply) - Pump for ICS - 24-position tool changer - Hinge-type chip conveyor, rear discharge - Glass scales including purge air by Siemens - Wireless workpiece measuring system Renishaw OMP60 - Tool measuring system Renishaw NC4 - Automatic machine door Note: The Halter automation system as well as vices including zero-point clamping system are not included in the scope of delivery.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 4,600 mm, cutting height (max.): 2,070 mm, cutting depth: 60 mm, saw blade bore: 30 mm, Submission of a bid obligates you to collect the item by the deadline of 27.02.2026! The machine was overhauled in the workshop, functionally tested, and cleaned in 2025! TECHNICAL DETAILS Cutting length: 4,600 mm Vertical cutting height: 2,070 mm Horizontal cutting height: 1,958 mm Cutting depth: 60 mm Saw motor power: 3.9 kW Saw blade diameter: ∅ 250 mm Saw blade bore: 30 mm Saw blade speed: 5,250 rpm Extraction port: ∅ 100 mm Strip gauge: 600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 5,826 x 2,838 x 1,428 mm Weight: approx. 910 kg Connection value/power supply: 4.8 kW / 3 ~ 400 V | 50 Hz EQUIPMENT Electromagnetic motor brake Cgjdpfxoyfnurs Afpen Mechanically braked support rollers

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Cgodpoya Dlcjfx Afpon X-axis travel: 610 mm Y-axis travel: 410 mm Z-axis travel: 460–510 mm Table size (L × W): 700 × 410 mm Maximum table load: approx. 400 kg per pallet T-slots: 18 × 4 mm Pallet changer: Automatic pallet changer (APC) Changeover time: ~4 seconds Pallet clamping: 3-point clamping system (patented) Spindle taper: BT-40 / ISO40 Maximum spindle speed: 8,000 rpm Spindle motor: approx. 9 kW Tool magazine (ATC): 24 positions Tool capacity: 24 Maximum tool diameter: approx. 80–125 mm Maximum tool length: up to ~250 mm Maximum tool weight: approx. 7 kg per tool Tool change time: Rapid change arm Rapid traverse speed (X/Y/Z): up to approx. 30 m/min Feed rate: up to approx. 10,000 mm/min Axes: 3 axes (X / Y / Z) MACHINE DETAILS Dimensions & Weight Machine dimensions (L × W × H): approx. 2,360 × 4,365 × 2,878 mm Machine weight: approx. 7,500 kg EQUIPMENT Automatic pallet changer (APC) 3-point clamping system for pallet fixing FANUC CNC control (e.g. 0iMB) LCD color display Automatic lubrication pump Coolant system incl. wash hose Chip conveyor Work light Electronic handwheel (MPG)

Condition: ready for operation (used), operating hours: 8,722 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! Cjdpfx Asygl Tujfpogn TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Y-axis): 500 mm Travel (Z-axis): 500 mm Table dimensions: 1,000 × 500 mm Number of T-slots: 3 Maximum table load: 400 kg Drilling performance Maximum drilling diameter (steel with tensile strength 600 MPa): 25 mm Drilling diameter with removable inserts from SK: 30 mm Thread cutting diameter: M20 Spindle Taper spindle bore: 40 (7:24) Tool shank: DIN 69871 Spindle diameter for bearings: 70 mm Distance spindle – table surface: 150–650 mm Spindle speed: 20–8,000 rpm Positioning accuracy Static deviation of the plane: 0.02 mm Repeatability: 0.008 mm Rapid traverse: 25,000 mm/min Feed rate: 5,000 mm/min MACHINE DETAILS CNC control manufacturer: Heidenhain Coolant system Nominal flow rate hydraulic generator for tool cooling: 32 l/min Nominal flow rate hydraulic generator for internal cooling: 60 l/min Maximum tank volume: 280 l Pneumatics Operating pressure: 0.6 MPa Operating hours Control powered hours: 30,743 h Machine powered hours: 25,946 h Program runtime: 8,722 h EQUIPMENT NC machine vice Various toolholders Drill chuck Face milling heads 4-fold clamping fixture suitable for vice 3D probe

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax 4, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,060 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X/Y/Z: 30 m/min Distance table surface to spindle nose: 150 - 760 mm Cgodpfx Asyfpi Djfpen Speed range: 10,000 rpm Spindle motor: 15 kW Tool holder: SK 40 Tool changer: 24 positions Table size: 1,300 x 630 mm Max. table load: 1,100 kg MACHINE DETAILS Control: Ultimax 4 Connected load: 24 kW Dimensions & weight Required space (LxWxH): 4.9 x 3.8 x 2.75 m Machine weight: 6,500 kg EQUIPMENT Chip conveyor

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 426 / 430, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel distances X-axis: 1,000 mm Y-axis: 800 mm Z-axis: 500 mm The machine received a new spindle in 2021! Speed range: 18,000 rpm Tool holder: SK 40 Tool positions: 30 Table size: 1,250 mm x 800 mm Max. table load: 1,200 kg MACHINE DETAILS Machine type: DMG DMC 100 V hidyn Control: Heidenhain TNC 426 / 430 Year of manufacture: 2000 New spindle: 2021 EQUIPMENT Chip conveyor Heidenhain TS 632 touch probe Blum laser tool breakage control Cgsdpfx Asyfpc Defpon

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 Codpfeyf E D Rex Afpogn MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, The following automation systems are also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) Cgjdoyfuq Tspfx Afpsn TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Number of tool positions: 40 Tool holder: BT 40 MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Hardened clamping plate, 20-M10 Tool measurement / tool breakage monitoring Digital 3D touch probe Renishaw Automation interface Automatic side door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS Cgsdjyfum Uspfx Afpen X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, The auction has been extended by one week due to the update of the machine data. TECHNICAL DETAILS X-axis: 1,660 mm Y-axis: 760 mm Z-axis: 660 mm Table size: 760 x 2,000 mm Max. table load: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Csdpsya Dw Sefx Afpegn Max. tool diameter: 80 mm Max. tool diameter with empty adjacent slot: 110 mm Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control: MAZATROL M-PLUS Dimensions & Weight Space requirement: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been serviced regularly.

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: CMXV1241149, Fully functional, only 2200 hours. Inspection is available at any time. Feel free to contact, will send you full specification for this machine. Was used at our production, no repairs at all. All paperwork in hands, machine is ready for export. Cgjdpfjygdbqex Afpjn