Used Vertical Lift Systems for sale (57,245)

Condition: used, Scissor Lift Table, Hydraulic Lifting Machine, Self-Propelled Scissor Lift, Holland Lift HL Q 135 EL 18, Used Machine Manufacturer: Holland Lift Type: HL Q 135 EL 18 Overall dimensions: Width: 4400 mm Depth: 1800 mm Njdpfoy Uq Smox Ad Ijwk Height: 2980 mm Year of manufacture: 1992 Working height: 15.50 m (Platform height: 13.50 m) Operating weight: 6500 kg High load capacity: 500 kg (approved for 2 persons, also suitable for lifting heavy tools and materials) Operating voltage: 48 V (battery-powered drive system) Extra: Manually extendable platform, allowing the basket length to be extended to more than 6 meters for an even larger working area. The battery provides approximately 1–2 hours of continuous operation.

Condition: used, Year of construction: 2015, lifting height: 16,600 mm, fuel type: electric, Weights Empty weight: 8.660 kg Functional Lifting capacity: 550 kg Working height: 1.860 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 0,00456x0,00202 Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: HL190E20 Nwodpfxsxydlnj Ad Iok Year of build: 2015 Condition: Used Data: Max. working height: 18,56 m Max. platform height: 16,56 m Lifting capacity: 550 kg Lifting capacity on extension: 550 kg Drive type: Batterie Platform dimensions LxW: 4,05 x 1,83 m Platform lenght pushed out: 6,07 m Total dimensions LxW: 4,56 x 2,02 m Transport height with / without railing: 3,52 / 2,76 m Movable up to working height: 18,56 m Ground clearance: 0,20 m Only indoor using: nein Own weight: 8.660 kg Special features: weiße Reifen, PSA Anschlagpunkte. Information: defekt, without control panel. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 750 kg Please contact Gebrauchtgeräte Center for more information Njdpfx Adjzfkvde Iowk

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 750 kg Nsdjzf Aqgepfx Ad Iswk Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 500 kg Nedpfx Adezfkb Tj Iswk Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 1.000 kg Please contact Gebrauchtgeräte Center for more information Nwodpfx Ajzi Nf Ssd Isk

Condition: used, Year of construction: 2011, fuel type: diesel, Lifting capacity: 1.000 kg Nsdpezi Ngcjfx Ad Iswk Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), functionality: fully functional, X-axis measuring range (tool diameter) approx. 350 mm Measuring range, Z-axis (tool length): approx. 400 mm Max. tool weight: 10 kg Tool holder/base holder: SK 50 Tool adapter: SK50 to SK40 Nwodozrtzcjpfx Ad Isk Measurement display with operating instructions/manuals Tool presetter in very good condition.

Condition: good (used), Year of construction: 1998, operating hours: 692 h, mast type: telescopic, fuel type: electric, Weights Nwodpfx Asyvd D Rod Isk Empty weight: 2.000 kg Functional Lifting capacity: 200 kg Working height: 1.750 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 1000 m Transport dimensions (LxWxH): (L/B/H): 7,20m / 0,89 m / 2,00m Additional information Please contact Tobias Mayr for more information

Condition: excellent (used), Year of construction: 2020, operating hours: 28,257 h, machine/vehicle number: 52011345674582, load capacity: 350 kg, overall weight: 7,490 kg, fuel type: diesel, product width (max.): 2,520 mm, working height: 30,000 mm, enginetype: Diesel, manufacturer: SYSTEM LIFT Nwsdpfx Aezqcaxjd Iok

Condition: excellent (used), Year of construction: 2018, 3D Systems Sinterstation Pro 140 SLS 3D Printer With Bos Pro 140 Breakout Station, 2 Rapid Change Modules & IRS Integrated Recycling Station Nwedpfx Aezt N Sgod Iok Build Volume (Envelope) 550 x 550 x 460mm (22 x 22 x 18"). Layer Resolution Low 15μm (0.006"), Layer Resolution High 8μm (0.0003"). Build Volume Rate 3L/h. Scanning Speed 10m/s. Laser Type 70W CO₂. S/No. 18MAO155 (2018). Note: With 2 Maintenance Services Per Year Since New. This item will be loaded to buyer's vehicle, a loading charge of £100 + VAT will be added to the buyer's invoice. Description Pro 140 SLS 3D Printer Overall Dimensions W1,880 x D1,795 x H1,970mm. Weight 1,500kg. IRS Integrated Recycling Station Overall Dimensions W1,285 x D1,170 x H2,640mm. Weight 790kg. Bos Pro 140 Breakout Station Overall Dimensions W2,050 x D1,100 x H1,870mm. Rapid Change Module Overall Dimensions W940 x D1,040 x H1,070mm. Weight 380kg. Note: Machine Has Been Decommissioned & Transported To Our Warehouse. Last 5 pictures show decommissioned machine in current state.

Year of construction: 2017, condition: used, REF: MM6447 Nwsdpjzbkl Ssfx Ad Iek 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Nwodpjynnlisfx Ad Iok Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Nwsdpfxsxd Thme Ad Ijk Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2026, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm Nwodpjwnp Akjfx Ad Isk - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. For more information please call us.

Condition: excellent (used), Year of construction: 2017, operating hours: 465 h, machine/vehicle number: 193189, load capacity: 500 kg, overall weight: 7,985 kg, construction height: 2,650 mm, product width (max.): 1,200 mm, working height: 19,000 mm, enginetype: Electric, manufacturer: Holland-Lift Njdpfszhqp Nsx Ad Iowk

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) Nodpezimaaofx Ad Iewk For further questions, feel free to contact us by phone.

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Njdpszii Umsfx Ad Iewk - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  - Capacity: 8,000 bph - Formats: 0.75 L bottles Nwodpfxoxfccie Ad Iek - Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection - Dimensions: 318 × 152 × 235 cm - Weight: 1,022 kg Scope of Delivery  - Main bottle bottom inspection module - Mouth integrity control - Wall inspection - Washing liquid residue detection - Push expulsion - Progressive expulsion - CIP Astigarraga  

Condition: used, 3D Systems SLS PRO 230 Sinterstation Pro Fully operational and complete with extensive accessories Nwsdpoyghifofx Ad Iek

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Nedpfx Ajzn Ipyed Ijwk Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: used, platform length: 3,100 mm, platform width: 1,250 mm, transport length: 3,500 mm, transport width: 1,550 mm, transport height: 2,700 mm, fuel type: electric, Manufacturer: Holland Lift Type: X 108 EL 16 Year of manufacture: approx. 1992 Working height: 12.5 m Weight: 4400 kg Load capacity: 500 kg Operating voltage: 48 volts Batteries (4 x 180 Ah) gel type, new in 2024 Platform (inside): 3100 x 1250 mm, extended: 4500 x 1250 mm Transport dimensions: 3500 x 1550 x 2700 mm (L x W x H) The machine can be tested/demonstrated on-site under power. Nwjdpfx Adsykbt Eo Isk All information is without guarantee. Subject to prior sale.

Condition: used, Optical fiber, connection technology -Dimensions: 440/280/H170 mm Nsdpfjfunxrox Ad Iewk -Weight: 1.5 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm Nodpfxeft Ah Hs Ad Iswk -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Condition: used, Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm Nwedpjda Ny Hefx Ad Iek -Weight: 5 kg