Used Vertical Slotting Machine for sale (65,962)

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Ncodpovh Nbuefx Aqvet Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: used, Year of construction: 1986, x-travel 1050 mm y-travel 560 mm z-travel 510 mm table-size 1200 x 560 mm spindle taper ISO 50 turning speed range 15 - 4000 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid motion -longitudinal/cross/vertical 10 m/min distance spindle nose and table 150 - 660 mm distance spindle center to column max. 650 mm table load max . 1 t no. of tools in magazin 24 tool diameter 110 mm workpiece length 350 mm weight of tools max. 15 kg spindle drive 7,5 kW control FANUC 11 MA total power requirement 13 kW weight of the machine ca. 9,3 t Ncsdpfetqqvyex Aqvjt dimensions of machine L x W x H 3,55 x 2,64 x 2,68 m

Condition: used, Year of construction: 1984, x-travel 1000 mm y-travel 508 mm z-travel 460 mm size of pallet 1240 x 550 mm numbers of pallets 2 workpiece weight 800 kg spindle taper ISO 40 spindle motor 5,5 kW turning speed range 28 - 4000 U/min no. of tools in magazin 30 control MAZATROL M 1 Ncjdpetqqk Ijfx Aqvjt total power requirement kW weight of the machine ca. 5,6 t dimensions of the machine ca. 4,50 x 3,00 x 2,65 m acc.: chip conveyor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Ncedpfxsyvh Dps Aqvjt

Condition: used, Year of construction: 2000, x-travel 1.050 mm Nsdjy Rakkopfx Aqvoct y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM Nsdpfxjgq Dl Ao Aqvect MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 510 x 510mm, Table 1200 x 450mm, Spindle speed 8,000rpm, Spindle taper BT40, Njdpfey Tka Uox Aqvoct Spindle Motor 11kW, Fanuc Oi-MC Control, 24 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Ncjdpfxsy Iyw Sj Aqvot

Condition: ready for operation (used), functionality: fully functional, JOHNFORD 2VS TURRET MILL Excellent Condition! • R8 spindle • 42" x 9" table • 2-axis DRO • Work light • Coolant Machine cleaned and serviced Price: €4,250 ex works JOHNFORD 2VS FRÄSMASCHINE Ausgezeichneter Zustand! Ncjdpfx Asy Tt S Toqvot • R8-Spindel • 42" x 9" Tisch • 2-Achsen-Digitalanzeige (DRO) • Arbeitsleuchte • Kühlmittelanlage Maschine gereinigt und gewartet Preis: 4.250 € ab Werk

Condition: used, Year of construction: 2009, Spinner VC 1460 vertical machining center Year: 2009 Control: Siemens 840D-SL Table length: 1620 mm Table width: 610 mm X: 1460 mm Y: 610 mm Z: 500 mm Spindle taper: ISO40 Speed maximum: 12000 rpm Maximum table load: 800 kg Positions in tool magazine: 32 Machine weight: 9300 kg. Accessories/options: spindle cooler swarf conveyor Nsdpfxjx Ew Hrs Aqvjct tool holders vices documentations coolant tank through spindle coolant Under power in our warehouse!

Condition: excellent (used), Year of construction: 2007, Controller Mitsubishi 64S Travel X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Ncjdpfxoy N D Hgo Aqvot Table load capacity 250 kg Spindle speed 12,000 min⁻¹ Tool magazine for 24 tools, BT 40 Internal coolant 20 bar Exhaust system Chip conveyor

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Ncedpoy T H Hwefx Aqvjt Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Nodpfx Aqey N Du Dovect Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table load: 800 kg, rotational speed (max.): 10,000 rpm, Equipment: chip conveyor, Tool holder: SK 40 (DIN 69871) Number of positions: 30 tools Ncjdpfx Aqjy Nif Uovst Through-spindle coolant (IKZ)

Condition: new, Year of construction: 2026, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity Nedpfoytx T Iex Aqvoct - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 Ncedpfey Nn Etex Aqvst max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, functionality: fully functional, Travel X/Y/Z: 1800mm/850mm/750mm Spindle nose to table distance: 200mm-950mm Nodpfx Aqoy N Suxjvoct Spindle center to column distance: 920mm Table dimensions X/Y: 2000mm/800mm Max. table load: 2200kg Tool holder: NT50 Speed: 6000 rpm Feed: 5m/min Rapid traverse: 12m/min Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm Weight: approx. 16,500kg Control: Heidenhain Operating hours: approx. 51,000h Spindle hours: approx. 26,000h Documentation available On-site inspection possible.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Fagor 8055/FL, spindle speed (max.): 1,200 rpm, No minimum price – guaranteed sale to the highest bidder! Njdpjy Tv Ausfx Aqvsct TECHNICAL DETAILS Travel range, X-axis: 850 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 450 mm Spindle speed (max.): 1,200 rpm Spindle speed (min.): 30 rpm Table width: 530 mm Table length: 900 mm T-slots: 14 mm wide, spaced at 60 mm Table load capacity: max. 400 kg MACHINE DETAILS Control system: Fagor 8055/FL Input voltage: 380 V Input current: Three-phase Connected power: 56 kW EQUIPMENT Documentation/Manual Various tool holders and tools

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 13 m/min, rapid traverse Y-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 7,500 rpm, MIKRON VCE 750 VERTICAL MACHINING CENTER TRAVELS 760x500x400 mm SPINDLE ISO 40 AT 7,500 RPM 20-POSITION TOOL CHANGER PROGRAMMABLE WORKPIECE COOLING NOZZLE USER AND MAINTENANCE MANUALS AUGER FOR CHIP REMOVAL COOLANT TANK Nsdpfx Asy Nx E Doqvsct

Condition: used, Year of construction: 2016, Technical details: x-travel: 1000 mm y-travel: 610 mm z-travel: 600 mm table-size: 1150 x 600 mm table load capacity: 1000 kg rapid traverse X- and Y-axis: 24 m/min rapid traverse Z-axis: 24 m/min spindle taper:: SK 40 spindle turning speed range: 10.000 1/min spindle drive: 15/22,5 kW tool change unit: 30 Pos. CNC-control: SIEMENS 828D operate shopmill distance spindle nose and table: 110 / 710 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 3,2 x 2,2 x 2,7 m vertical machining center, - internal coolant supply 30 bar - chipconveyor - cartridge filter - flat tracks - el. handwheel - prepared for 4th axis - 3D touchprobe RENISHAW OMP 60 - indirect measuring system - accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray) approx. 6.000h "spindle on" Njdpjw Hg Sysfx Aqvect *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40671, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 762 mm, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, spindle speed (min.): 10,000 rpm, spindle motor power: 15 W, number of slots in tool magazine: 25, “HAAS” MACHINING CENTER, MODEL VF 6 Complete with standard equipment and: SCREW CONVEYOR FOR CHIP REMOVAL HIGH PRESSURE SYSTEM CONTINUOUSLY ROTATING TABLE, 300 MM Nedpfxowutz Rj Aqvect

Condition: good (used), Year of construction: 1995, FOR SALE: KIRA VTC 30 Elite Vertical Machining Center Compact, fast, and extremely reliable Japanese machine for precision engineering. Technical Specifications (Precise) Type: Vertical Machining Center (VMC). Axis Travel (XYZ): Approximately 350 x 300 x 350 mm. Tool Magazine: 10-position circular tool changer. CNC Control: FANUC Series 21-M with integrated display. Manufacturer Data (Source: IMG_8364.jpeg) Brand: KIRA Corporation. Ncjdpfxoy Sgtno Aqvst Model: VTC 30 E. Year: 1995 (CE Marked 95). Serial Number: L0212. Origin: Made in Japan. Key Features Japanese Precision: KIRA’s build quality ensures outstanding machining stability. Fanuc Interface: User-friendly programming and easy maintenance. Safety: Fully enclosed machine with emergency stop button and CE compliance.

Condition: good (used), FOR SALE High-Speed Machining Center FANUC ROBODRILL Ncodpfx Aqjy Sghrsvjt Model: FANUC ROBODRILL AT14IA Year: October 1999 Serial Number: 99XTH612 Weight: 1,800 kg Power Supply: 3-phase, 200-220V, 9 KVA Origin: Made in Japan Capabilities & Equipment Tool magazine: 14 stations (ultra-fast tool changer). Machining travels: X axis: 500 mm, Y axis: 380 mm, Z axis: 300 mm. Spindle speed: Max 8,000 rpm. Rapid traverse (X, Y, Z): up to 48 m/min. Table: Max load capacity 200 kg. WITH ROTARY TABLE BT MACHINES BUY SELL

Condition: good (used), Year of construction: 2005, FOR SALE VERTICAL MACHINING CENTER QUASER MV154P/12 Condition: Used Brand: QUASER Machine Tools, Inc. Model: MV154P/12 Year: July 2005 CNC Controller: FANUC 18i-MB. Spindle speed: 12,000 rpm (Series /12). Origin: Taiwan. Serial number: 51C0391. Machine weight: 6,400 kg. Floor space: 235 cm (Length) x 220 cm (Width). Nodpfx Asy Sgbxoqvect Overall height: 275 cm. Travel (indicative for this model): Approx. 1020 x 530 x 560 mm. Fanuc Reliability: Fanuc 18i-MB system Speed: "P/12" version ideal for tasks requiring high spindle speed and fast dynamics.

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Nedpfx Asw Idb Heqvsct Y axis working area: 850 mm Main Electrospindle power: 5 KW Total number of drilling spindles: 19