Used Vertical Packaging Machine for sale (73,962)

Condition: used, Year of construction: 2020, Coalza RS400-DH Automatic Vertical Dry Ice Packaging Machine, 2020 Rcsde Agq Sdopfx Airjh Coalza RS400-DH automatic vertical form-fill-seal packaging machine, manufactured in 2020. Serial number 11431. This machine is equipped with volumetric dosing and was configured for packing dry ice. The original Coalza installation layout for this serial number shows a 10 kg dry ice bag application and a bag ejector. The take-away conveyor is indicated as customer-supplied in the original layout and is not included unless separately agreed upon. The machine forms, fills, and seals bags from roll-fed film. The model manual specifies PE and PP film. Controls include a PLC with a touchscreen and temperature-controlled sealing. Technical specifications: Manufacturer: Coalza Model: RS400-DH Serial number: 11431 Year: 2020 Application: Dry ice bagging, original layout for 10 kg bags Dosing system: Volumetric Film: PE and PP Electrical supply: 380 V, 3-phase + neutral + earth, 50 Hz Rated current: 10 A Installed power: 3.8 kW Compressed air: 6 bar; approx. 40 l/min for the basic machine, up to 90 l/min with accessories Approximate dimensions: 1,342 × 1,993 × 3,048 mm (W × D × H); installation dimensions may vary RS400 series reference: bag width up to 450 mm, recommended minimum 100 mm; film roll width up to 950 mm; bag length 50–600 mm Manufacturer’s stated RS400 mechanical maximum: up to 50 bags/min; actual output depends on the product, film, and machine configuration Coalza RS400-DH, Coalza packaging machine, dry ice packaging machine, dry ice bagging machine, carbonic ice packaging machine, ice bagging machine, automatic vertical packaging machine, vertical form-fill-seal machine, VFFS packaging machine, volumetric dosing machine, 10 kg dry ice bags, industrial packaging machinery, used packaging machine.

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Rcjdo Aayk Ropfx Airsh Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Rodpfext Ib Hjx Airjch

Condition: used, Vertical vacuum machine Boss Vakuum V 810 VA Professional vertical vacuum machine Boss Vakuum V 810 VA – ideal for liquids, powders and stand-up pouches. Rcodpfjz Dtdxox Airoh You are bidding on a used, extremely powerful and fully functional vertical vacuum machine from the quality brand Boss Packaging Machines (model V 810 VA). This industrial machine is specifically designed for the vertical vacuum packaging of large stand-up pouches, liquids (such as soups, sauces, oils), granules, and powders. Thanks to the vertical design, spilling or shifting of the pouch contents during the evacuation process is effectively prevented. Technical data: Chamber internal dimensions: 850 x 670 x 200 mm (W x D x H) Sealing length: 810 mm (large seal for maximum pouch width) Vacuum pump: High-quality Busch rotary vacuum pump Control: Intuitive Z 3000 sensor control with up to 99 program memories Liquid protection: Equipped with an H2O sensor for automatic boiling point detection (prevents boiling over/splattering) Connection: 3 phases (400V high voltage) External dimensions: 1070 x 1000 x 1980 mm / 2200 mm with open lid Weight: approx. 470 kg "Everything from one source: We will gladly offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, Sandiacre TG320-L Packaging Machine. Perfectly working, ready to use. Redpjygqymofx Airech

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Rcjdpjyzxgfofx Aireh Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: B5607, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 410, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table length: 1,120 mm Table width: 600 mm Spindle speed: max. 6,000 rpm Tool positions: 18 Redpfj Afwzgex Airjch MACHINE DETAILS Control system: Heidenhain iTNC 410 Internal coolant pressure: 20 bar EQUIPMENT Electronic handwheel 18-position tool changer Internal coolant supply Chip conveyor

Condition: excellent (used), functionality: fully functional, machine/vehicle number: BJ9-002-042, travel distance X-axis: 560 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 355 mm, controller model: Hurco Ultimax, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS X-axis travel: approx. 560 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355 mm Table length: approx. 760 mm Table width: approx. 355 mm Spindle speed: up to 6,000 rpm Tool holder: SK40 / CAT40 Main motor power: approx. 7.5–10 HP Tool positions: 16 Rapid traverse: approx. 10 m/min MACHINE DETAILS Control system: Hurco Ultimax Redpfj Afwwbex Airsch Machine weight: approx. 3,200 kg EQUIPMENT 16-position tool changer Various accessories

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. Redpoz I Inaofx Airech The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SEICOS Σ10M / A10M, table load: 750 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Table length: approx. 1,120 mm Table width: approx. 485 mm Table load capacity: max. approx. 750 kg Spindle speed: typically up to 8,000 rpm Tool holder: SK40 Number of tool positions: 30 MACHINE DETAILS Rcsdpfx Ae Afwvlsireh Control system: SEICOS Σ10M / A10M Machine weight: approx. 6,500 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Redez Il Rrjpfx Airjch Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Rcsdpfx Ais Afxrqoreh TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Tool positions: 22 MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Vertical Packaging Machine Ilapak Vegatronic 1000 VT1000 The machine is in very good condition and ready for operation. Rcjdpfx Aiox Nbwvsrjh - Maximum package width: 380 mm - Minimum package width: 50 mm - Maximum package length: 380 mm - Maximum film width: 780 mm - Sealing jaw width: 400 mm - Sealing jaw type: constant heat - Jaw drive: ABB servomotor - Control: PLC, HMI Omron - Memory: 40 programs - Supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1280x2325x1285 mm - Machine weight: 800 kg - Option to integrate with weigher, printer

Condition: excellent (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC 530, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Spindle speed: max. 8,000 rpm MACHINE DETAILS Rjdpfj Afwxzsx Airsch Control system: Heidenhain TNC 530 Operating hours: Spindle hours: 5,233.8 h Machine operating hours: 13,455 h Control system operating hours: 17,705 h

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Rodpfszwxz Ejx Airsch Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: like new (used), functionality: fully functional, cutting length (max.): 600 mm, cutting width (max.): 410 mm, The machine is in very good condition – like new. Equipped with a vertical heating element and sealing jaws for packaging in PE (polyethylene) film – a complete set of jaws for laminates is available. Forming tube for packages with a width of 350 mm – other sizes are available. Technical data for ILAPAK Vegatronic 4000 VFFS: ▪️ Output: up to 140 packages/min ▪️ Machine type: Continuous Film Motion ▪️ Type: VFFS – Vertical Form Fill Seal Bag size: ▪️ Minimum width: 70 mm ▪️ Maximum width: 410 mm ▪️ Maximum length: 600 mm Supported films: ▪️ Heat-sealable films ▪️ Polypropylene (PP) ▪️ Laminates ▪️ PE (polyethylene) film Film roll: ▪️ Maximum roll width: 880 mm ▪️ Maximum outer diameter: 550 mm ▪️ Core diameter: 76 mm ▪️ Maximum roll weight: 100 kg Power supply: ▪️ 400 V ±5% ▪️ 3 phases + neutral ▪️ 50 Hz Rcodpfx Ajy Tqybjirsh ▪️ 7.5 kW Compressed air: ▪️ 7 bar ▪️ 350–900 Nl/min Control: ▪️ Industrial PC ▪️ 8.4” touch panel ▪️ Memory for up to 100 programs Construction: ▪️ Stainless steel ▪️ Hygienic Open Frame design ▪️ Quick bag size changeover ▪️ Film centering ▪️ Servo drives Machine dimensions: ▪️ 1478 × 2336 × 1550 mm Weight: ▪️ Approx. 1500 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Redjz Il Haopfx Airsch Rapid traverse: 15 m/min Positional accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 25

Condition: excellent (used), Year of construction: 2000, operating hours: 24,695 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rcjdj Afxn Sspfx Aireh X-axis travel: approx. 1,000 mm Y-axis travel: approx. 800 mm Z-axis travel: approx. 500 mm Table length: approx. 1,250 mm Table width: approx. 800 mm Table load capacity: max. approx. 1,200 kg Spindle speed: up to approx. 15,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain Spindle operating time: 24,695 h Machine operating hours: 64,814 h Control system operating hours: 72,542 h EQUIPMENT Automatic tool changer Renishaw probing system Coolant system Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, table width: 350 mm, table length: 850 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Rodpfjz Il Nzsx Airjch Submitting a bid obligates you to collect the machine on time between November 16, 2026, and November 26, 2026! The machine’s spindle was recently replaced! TECHNICAL DETAILS Travel distance X-axis: 800 mm Travel distance Y-axis: 500 + 50 mm Travel distance Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table length: 850 mm Table width: 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Weight: 10,000 kg EQUIPMENT Chip conveyor KNOLL Paper band filter system KNOLL Zero-point clamping system SCHUNK SDE 138 Tool holders and tools in the tool changer Measuring probe as shown in the pictures Note: A truck with a width of 3,000 mm is required for transport. External reference: Wittner - Lot 11

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Rodpfx Ais Aggiboroch Number of phases: 3 Machine weight: approx. 7,500 kg Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: used, Year of construction: 2011, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 360 mm, controller model: FANUC 31i-A5, spindle speed (max.): 10,500 rpm, TECHNICAL DETAILS X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Distance from spindle nose to table: 200–560 mm Rapid traverse rate X/Y/Z: 60 m/min Spindle speed range: 36–10,500 rpm Spindle power: 30–35 kW Tool holder: HSK-A63 Number of pallets: 2 Pallet load: max. 450 kg Magazine capacity: 2 × 21 Rcsdpj Agfrwjfx Airoh Tool diameter: max. 88 mm Tool diameter with free neighboring positions: max. 125 mm Tool length: max. 250 mm MACHINE DETAILS CNC control: FANUC 31i-A5 Dimensions & Weight Machine weight: 5,300 kg Overall dimensions: 3,200 × 3,250 × 3,245 mm EQUIPMENT Chip conveyor Paper filter High-pressure coolant pump Tool setting 4-axis table, 1 piece

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse rate X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Spindle interface: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Table load: max. 1,500 kg Magazine type: Chain magazine Number of tool positions: 41 Rsdpfo Agfr Ejx Airech Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gear change Chip conveyor

Condition: defective spare-parts repository (used), CNDN CK6140 machining center, non-functional, has been disassembled, a new part has been machined but we have not reassembled it. Sold as non-working – can be reassembled or used for spare parts. Rcedpsx S I Dbjfx Airsh If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. • Z-stroke: 245 mm • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) Rjdozlbx Njpfx Airoch • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp CNC Hand-held control unit B10-2 DATRON next Camera-Feature Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Pro)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Rjdsz Il E Aopfx Airech Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected power: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 23