Used Vibratory Compactor for sale (798)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons Prodpjgwa T Rofx Airjc 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW Prsdpfogwa Urjx Airoc 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Psdjra Rbgepfx Airerc Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Pedpferc Dkqsx Airorc Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy Prodpon Smclofx Airsc separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The press has been cleaned, functionally tested, repaired and equipped with a new control system in accordance with EN16500. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: Wire Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors, covered Includes starter kit for bale strapping, 19mm Psdpfxov Rzwmj Airsrc Serial number: 610.00.184 Year of manufacture: 2003

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg Prjdpfjv Akmzjx Airjc 4-fold with polyester tape Year 2010-2013

Condition: good (used), Goods elevator, steep conveyor, height conveyor for thread rolling machine, flat-jaw thread rolling machine, vibratory conveyor -Manufacturer: Tortona, freight elevator aligned with long screws -Elevator usable width: 700 mm -Maximum diameter: 16 mm -Individual components: see photos -Dimensions: 1450/900/H3040 mm Psdpfx Aiotp Rfzerjrc -Weight: 960 kg

Condition: good (used), Vibratory feeder, vibratory feeder, vibratory feeder, feeding device, spiral conveyor, vibratory filler, vibratory spiral conveyor, vibratory dosing unit, feeding technology, feeding device, storage container with automatic feeding -Automated feeder with storage container Prjdpfxjb A Iv Ne Airec -The device was built for the production of electric clamps. -Dimensions: 1300/1400/H1200 mm -Weight: 260 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, total width: 1,200 mm, total length: 4,800 mm, total height: 2,190 mm, operating pressure: 220 bar, warranty duration: 3 months, overall weight: 6,800 kg, Reinforced for processing ferrous materials. Includes a crushing device at the end of the jaw to process bulky objects. TECHNICAL CHARACTERISTICS – Blade length: 750 mm – Clamping: hydraulic – Clamping length: 700 mm – Control: automatic, semi-automatic and manual, with safety pedal, according to CE standard; 3 emergency stop switches – Power supply: 440 Volt – Electrical power: 30 HP – Cutting capacity: solid round Ø 80 mm (St37) – Work table height: 1170 mm – Oil tank: 1000 liters – Number of strokes: 10 to 30 strokes per minute – Pump: self-regulating hydraulic pump Pjdpfxjz D Tttj Airorc – Control unit: automatic – Dimensions: 4,800 x 1,200 x 2,190 mm – Weight: Approx. 6,800 kg

Year of construction: 2012, condition: used, Tipper with discharge belt and cross conveyor for the food processing industry This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away. The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tipper with discharge belt and cross conveyor Belts: Blue food-safe discharge belt plus cross belt Prjdpsz Ndhrofx Airoc Safety: Mesh safety guard with emergency stop Controls: Control box with up/down buttons (height adjustment) Construction: Stainless steel

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available - Pjdpfjdwi Rkox Airsrc

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 16232, overall weight: 19,400 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,400 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 16 P/E – 16 m³ | Discharge hatch | Fully rubber-lined For sale: Avermann MPC 16 P/E compaction container, built in 2010, with a capacity of 16 m³. This robustly built Avermann compaction container is specifically designed for applications involving the processing of moist or wet waste streams. The machine is equipped with a discharge hatch and is fully rubber-lined on both the front and rear sides. This makes this compaction container particularly suitable for situations where good sealing is important and where, for example, wet waste, industrial waste, or other moist waste streams are processed. The container is equipped with a hook lift system on the front, making it suitable for transport with a hook arm system. Technical data: Brand: Avermann Type: AVOS MPC 16 P/E Year of construction: 2010 Serial number: 16232 Capacity: 16 m³ Power supply: 400 V / 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Maximum working pressure: 200 bar Own weight: approx. 4,400 kg Permissible total weight: 15,000 kg Hook lift system on the front Equipped with a discharge hatch Front and rear sides fully rubber-lined Robust industrial construction Special features: Due to the combination of the discharge hatch and the rubber lining, this machine is very suitable for processing wet and moist waste streams. The large feed opening makes it easy to quickly feed larger quantities of waste. The compaction container is in used condition and has signs of wear consistent with its age and use. Technically, it is a heavy-duty and robustly built Avermann compaction container for professional use. Prsdpjz Eqzqsfx Airjc Suitable for, among others, industry, food companies, manufacturing companies, catering, recycling and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price or technical questions. Keywords: Avermann, AVOS, MPC16, MPC 16 P/E, compaction container, 16m3, waste compactor, container compactor, wet waste, discharge hatch, rubber sealing, rubber-lined, hook lift, waste compaction, recycling, compactor.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Prodoz H I E Ajpfx Airec Oil filter changed Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: good (used), Strautmann AutoLoadBaler baling press Suitable for baling: Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Podev Aktnspfx Airorc Year of manufacture: 2017-2018

Condition: reconditioned (used), Year of construction: 2015, Presto HAN10R Prjdpfx Asz E U Tweirec Year of manufacture: 2015 2 units immediately available Skip loader container 10 cubic meters usable volume Top-hinged discharge door Two-part lid, opening to the left/right above the filling opening Prepared for ramp operation Technically refurbished, inspected, and serviced Painted in RAL6018 We will gladly prepare an offer including delivery.

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Pedez Hbzqjpfx Airjrc Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW 2. PRESKONTAINER LM20L, 2011, 5.5 kW Price on request!

Condition: used, Year of construction: 2019, power: 4 kW (5.44 HP), 1. PRESCONTAINER LM10ASG +HKV, YEAR OF MANUFACTURE – 2019 OUTPUT – 5.5 kW CAPACITY – 10 m2 2. PRESCONTAINER LM10ASG, YEAR OF MANUFACTURE – 2015 OUTPUT – 5.5 kW CAPACITY – 10 m2 3. PRESCONTAINER LM12R + HKV, YEAR OF MANUFACTURE – 2009 OUTPUT – 5.5 kW CAPACITY – 10 m2 4. PRESCONTAINER NP10APK, YEAR OF MANUFACTURE – 2011 OUTPUT – 5.5 kW CAPACITY – 10 m2 PRICE UPON REQUEST! Prsdpfez Hclkox Airoc

Condition: used, Year of construction: 2015, functionality: fully functional, pressing force: 54 t, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 400 kg, total width: 2,150 mm, total height: 2,160 mm, total length: 1,700 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Strautmann AutoLoadBaler baling press – Year of manufacture: 2015 Used automatic Strautmann AutoLoadBaler baling press for efficient compression of cardboard and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Psdpfx Asz Huhksirjrc Model: AutoLoadBaler Year of manufacture: 2015 Pressing force: 530 kN (approx. 54 tons) Motor power: 4 kW Power supply: 3 x 400 V / 50 Hz Bale dimensions: approx. 1,200 x 800 x 1,100 mm Bale weight: approx. 400 kg, depending on the material External dimensions: approx. 1,700 x 2,150 x 2,160 mm (L x W x H) The AutoLoadBaler enables comfortable and efficient compression of recyclable materials and significantly reduces the volume of material. For transport, the machine can be partially disassembled. The hydraulic ram must then be professionally reassembled. Inspection possible by arrangement. All information without guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Prodpfx Aoz Eg Dzjirsc Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 SALE PRICE - 4400 EUR + VAT RENTAL PRICE - 160 EUR + VAT Psdpez Ehgwofx Airorc

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Prodpez Ea Rbsfx Airsc Transport weight: 10,000 kg Transport packages: 3 pcs.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17423-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transportation of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. Pedpjz Enz Iefx Airjrc The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Details: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press installation, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17427-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. Pedpez En A Sjfx Airjrc This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavily built and very suitable for professional use in various industries, including manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E17427-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Special features: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, pressing system, screw compactor, Schneckenverdichter.

Condition: used, mileage: 10 km, first registration: 07/2011, Year of construction: 2011, Selling a Hagemann HG3 waste collection body with hydraulic waste compactor suitable for all Multicars with short wheelbase and similar vehicles 2x identical available year of construction 7/2011 Type HG3 Payload 1350KG Weight 990KG Prsdpfx Asvgpfwoiroc Capacity 3 m3 Mounted on the original ball mount of the tipper. Good condition - ready for immediate use! Errors and modifications excepted!